Runyunteng RYT-009 Nightlight Wireless Charging Station User Manual
- June 16, 2024
- Runyunteng
Table of Contents
Nightlight Wireless Charging Station
User Manual
RYT-009 Nightlight Wireless Charging Station
| Wireless Charging
---|---
| Night Light
| Phone Stand
| Watch Charger
Please carefully read this user manua lbefore using the product
Product Specifications
Model: RYTO09
Wireless Output: SW /7.S5W / 10W / 1SW
TYPE-C Input: 5V-3A / 9V-2.7A
TYPE-C Output: 5V-2A
USB-A Output: 5V-2A
Size: 285 x 116.2 x 143mm
Product Weight: 618g
Product Features
- Phone Wireless Charging
- iWatch Wireless Charging
- Earbuds Wireless Charging
- Nightlight Touch pad
- LED Screen Touch pad
- C/F Button
- 12/24 Button
- WEEK Button
- HOUR Button
- MIN Button
- USB-A Output
- 2 TYPE-C Output
- TYPE-C Input
Using Bluetooth TimeSync
Open the product. Open phone SETTING – BLUETOOTH – CONNECT A NEW DEVICE –
select device “009” and connect
(Note: For Android user, please allow access to messages to activate time sync
function)
Using Wireless Charging
Place the device into corresponding area like the figure below to charge your
device
Using the Night light
l . Tap – Switch the light color
ll. Long press – Adjust the brightness (range: 10%- 100%)
Use the Display Screen
I. Tap – Adjust time brightness (Range: 100% – 70% – 35% – 0%)
ll. The touch pad can be used as a phone stand
Ill. The temperature is based on surrounding temperature, not the temperature
of outdoor or from phone’ s application
Use Side Button
I . Click the C/F button to switch Celsius and Fahrenheit
ll. Click the 12/24-Hour button to switch between 12-hour and 24-hour time
formats
Il. Long press the WEEK button to enter day of week setting made. Then click
the button to adjust. Long press to exit setting.
IV. Long press the HOUR button to enter hour setting mode. Then click the
button to adjust. Long press to exit setting
V. Long press the MIN button to enter minute setting mode. Then click the
button to adjust. Long press to exit setting
§15.19 Labeling Requirements
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation
§15.21 Information To User
Any unauthorized changes or modifications not expressly approved by the
compliance authority may void the user’s authority to operate the equipment.
§15.105 Information To The User
Note: This device has been tested and complies with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a residential installation. This device generates and uses
radio frequency energy and, if not installed and used according to the
instructions, may cause harmful interference to radio communications. However,
there is no guarantee that interference will not occur in a particular
installation. If this device does cause harmful interference to tadio or
television reception, which can be determined by turning the device off and
on, the user is encouraged to try to correct the interference by one or more
of the following measures:
- Adjust or relocate the receiving antenna.
- Increase the distance between the product and receiver.
- Connect the product into an outlet on a circuit different from that to which the receiver is connected
- Consult the dealer or an experienced technician for help.”
*RF Warning For Mobile Device
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
minimum distance 20cm between the radiator & your body.*RF warning for Mobile
device:
**** This device must not be disposed of with regular household waste and
must be recycled. Thes symbol indecates that this product should not be
treated as household waste but should be taken to the appropriate etectronic
and etectrical equipment recycling facility for proper desposal
This product complies with RoHS 2.0, CE, and FCC certification.
We hereby declare that the product model of Shenzhen
Runyunteng Technology Co, Ltd. is RYTOO9
FCC ID:2BAY8-RYT-009
Made in China
The pictures are for reference only; please refer to the actual item.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>