nVent 150M0125S4 150M STANDARD U-BOLT Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent 150M0125S4 150M STANDARD U-BOLT
FEATURES
Pipe support for general piping applications Comes complete with 4 nuts (2 installed on each end) Conforms with Federal Specification WW-H-171 (Type 24), Manufacturers Standardization Society ANSI®/MSS-SP-58 (Type 24)
PRODUCT ATTRIBUTES
Material: Stainless Steel 304 (EN 1.4301)
- Pipe Size: 1 1/4″
- Outer Diameter: 1.660″
- Rod Size: 3/8″
- Screw Length: 2 3/8″
- A: 4 1/8″
- B: 2 1/16″
- Static Load: 1,090 lb
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>