SIYI R1 HD Recording FPV Camera User Manual
- June 16, 2024
- SIYI
Table of Contents
R1 HD Recording FPV Camera
Product Information
Specifications
- Product Name: R1 R1M Recording Camera
- User Manual Version: V1.0
- Release Date: October 2022
- Copyright: 2022 SIYI Technology
Introduction
The R1 R1M Recording Camera is a high-definition FPV camera
designed for recording and transmitting video and images. This user
manual provides detailed instructions on how to configure the
camera, record videos, and transmit and display images. Please read
this manual carefully before using the product.
Technical Specification
- Video Output Port
- Working Voltage
- Power Consumption
- Working Temperature
- Waterproof Level
How to Configure Camera
Check IP
To configure the camera, follow these steps:
- Step 1: Connect the camera to a power source.
- Step 2: Check the IP settings on the camera.
- Step 3: Make note of the IP address displayed.
Change IP
If you need to change the IP address of the camera, follow these
steps:
- Step 1: Access the camera’s settings menu.
- Step 2: Navigate to the network settings.
- Step 3: Change the IP address to the desired value.
- Step 4: Save the changes and restart the camera.
Video Recording
To record videos using the R1 R1M Recording Camera, follow these
steps:
-
Step 1: Ensure that the camera is powered on and properly
connected. -
Step 2: Configure the camera settings for video recording.
-
Step 3: Press the record button to start recording.
-
Step 4: Press the record button again to stop recording.
Image Transmission and Display
The R1 R1M Recording Camera allows for image transmission and
display. To transmit and display images, follow these steps:
-
Step 1: Connect the camera to a compatible display device.
-
Step 2: Configure the camera settings for image
transmission. -
Step 3: Start the image transmission process.
-
Step 4: Adjust the display settings on the connected device as
needed.
FAQ
Q: Can I disassemble or modify the camera without permission
from SIYI Technology?
A: No, disassembling or modifying the camera without permission
from SIYI Technology is prohibited. Doing so may cause damage to
the device and void any warranty.
Q: What are the recommended storage and carrying conditions for
SIYI products?
A: SIYI products should be stored and carried in conditions that
are not too hot (above 60°C) or too cold (under -20°C). They should
also be protected from direct sunlight, excessive dust, and
moisture. Additionally, make sure to use stable holders that
provide solid support and avoid placing the products near steam or
other heat sources.
R1 R1M Recording Camera User Manual V1.0
R1 / R1M
HD RECORDING FPV CAMERA USER MANUAL
V1.0 Oct 2022
1
2022 SIYI Technology Copyright
R1 R1M Recording Camera User Manual V1.0
SIYI User Group – Facebook
SIYI Official Store (https://shop.siyi.biz) SIYI Official AliExpress Store
(https://siyi.aliexpress.com) SIYI YouTube Channel
(https://www.youtube.com/c/SIYITech)
2
2022 SIYI Technology Copyright
R1 R1M Recording Camera User Manual V1.0
CONTENT
READ TIPS …………………………………………………………………………………………………………………………………………….. 1 Icons
…………………………………………………………………………………………………………………………………………………….1 Safety
………………………………………………………………………………………………………………………………………………….. 1
Storage/Carrying/Recycling ………………………………………………………………………………………………………………….1
1 INTRODUCTION …………………………………………………………………………………………………………………………………. 3 1.1
Technical Specification …………………………………………………………………………………………………………………..3
2 HOW TO CONFIGURE CAMERA ……………………………………………………………………………………………………….. 5 2.1
Check IP ……………………………………………………………………………………………………………………………………….. 6 2.2 Change IP
………………………………………………………………………………………………………………………………………6
3 VIDEO RECORDING …………………………………………………………………………………………………………………………… 8 4 IMAGE
TRANSMISSION AND DISPLAY …………………………………………………………………………………………….. 9
4.1 Connect to HM30 HD Image Transmission System ……………………………………………………………………….
9 4.2 Connect to MK15 Mini Handheld Smart Controller
…………………………………………………………………………9 4.3 Connect to Third-Party Image Transmission
Systems ………………………………………………………………….10 4.4 Solutions to No Image from R1 / R1M
Recording Camera ………………………………………………………….. 11
4.4.1 Video Output to An Android Device ………………………………………………………………………………………. 12
4.4.2 Video Output to A Windows Device ………………………………………………………………………………………. 13
4.5 Common IP Addresses …………………………………………………………………………………………………………………15 5 SIYI
FPV APP ……………………………………………………………………………………………………………………………………. 16 5.1 Settings
……………………………………………………………………………………………………………………………………….. 18 5.2 Link Status
……………………………………………………………………………………………………………………………………19 5.3 Gimbal Camera
…………………………………………………………………………………………………………………………….19 5.4 About SIYI FPV
…………………………………………………………………………………………………………………………….21 6 Firmware Upgrade and
Configuration ………………………………………………………………………………………………… 22 7 After-sale Service
………………………………………………………………………………………………………………………………. 24 8.1 Repair Service
…………………………………………………………………………………………………………………………….. 24 8.2 Warranty
……………………………………………………………………………………………………………………………………… 25 8.2.1 7-Day Return &
Refund ………………………………………………………………………………………………………….25 8.2.2 15-Day Replacement
……………………………………………………………………………………………………………..26 8.2.3 1-Year Warranty Repair
………………………………………………………………………………………………………… 28
3
2022 SIYI Technology Copyright
READ TIPS
R1 R1M Recording Camera User Manual V1.0
Icons
Please pay more attention to content indicated with the following marks:
DANGER Dangerous manipulation probably leads to human injuries. WARNING Warnings on manipulation possibly leads to human injuries. CAUTION Cautions on what manipulation may lead to property loss.
Prohibited
Mandatory
Mark
Safety
Irregular or irresponsible manipulations to the device may cause damage,
property loss, or human injuries. Users under 14 years’ old should follow an
experienced trainer’s guide. Disassembling or modification to the system is
prohibited without permission from its manufacturer, SIYI Technology.
Storage/Carrying/Recycling
When your SIYI products are stand idle, or you are bringing it outdoors, or
the system reached service life, then please do read the precautions below.
1 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
CAUTION
Always place your SIYI products at places where babies or kids do not reach.
DANGER
SIYI products should be placed in places with below conditions: Not too hot
(above 60) or too cold (under -20). Not under direct sunshine or too dusty or
too wet. Not on an unstable holder which lacks solid supports or may cause
vibration. Not nearby steam or other heat sources.
2 2022 SIYI Technology, All Rights Reserved
1 INTRODUCTION
1.1 Ports and Definitions
R1 R1M Recording Camera User Manual V1.0
3 2022 SIYI Technology, All Rights Reserved
1.2 Technical Specification
Video Output Port Working Voltage Power Consumption Working Temperature
Waterproof Level
Dimension Weight
Image Sensor FOV
TF Card Recording Resolution
Video Storage Bitrate Supported File System
Video File Format Supported TF Card Type
R1 R1M Recording Camera User Manual V1.0
Overall
Ethernet 12 V 3W
-10 ~ 50 IP4X
42 x 42 x 25 mm 39 g
Camera
1/2.9-inch Diagonal: 90°, Horizontal: 80° 1080p (1920 x 1080) @ 30 fps 720p
(1280 x 720) @ 30 fps
12 Mbps FAT32 H.264 MicroSD Class10, max 32 GB
4 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
2 HOW TO CONFIGURE CAMERA
If it is the first time that you are going to configure the camera, please do
flash the camera firmware once through SD card, so you can see the files for
camera configuration in the SD card.
Mark Please refer to the chapter 6 of this manual for camera firmware update
steps. After flashing camera firmware by SD card, we will see two “.txt” files
in the root category of the SD card.
“curip.txt” for checking the current IP addresses. “setip.txt” for customers
to change IP addresses.
5 2022 SIYI Technology, All Rights Reserved
2.1 Check IP
R1 R1M Recording Camera User Manual V1.0
Open the “curip.txt” file, you will see the current IP addresses of the camera.
“192.168.144.25” is the factory default camera IP addresses.
2.2 Change IP
Open the “setip.txt” file, input the IP addresses you need after “IP = “.
Then insert the SD card to the camera and restart the camera. After waiting for three to five minutes, the IP addresses will be flashed into the camera. Then we restart the camera again to finish changing IP addresses.
Mark
6 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
When you are using R1/R1M recording camera with SIYI MK15 or HM30, please do
configure its IP addresses within “192.168.144.X” and avoid conflicting with
existing IP addresses in the link. For detail, please refer to the “Common IP
Addresses” chapter in MK15 and HM30 user manual.
7 2022 SIYI Technology, All Rights Reserved
3 VIDEO RECORDING
R1 R1M Recording Camera User Manual V1.0
R1 / R1M recording camera support video recording function through “SIYI FPV” app.
When the SIYI FPV app is running, tap the “Record” button on the touchscreen can start video recording, and the “Record” button will change to “Recording” button. Tap the “Recording” button will stop video recording.
Mark SD / TF card should be inserted to R1 / R1M recording camera before using recording function. Please use v393 and above version of SIYI FPV app to experience video recording function.
8 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
4 IMAGE TRANSMISSION AND DISPLAY
R1 / R1M recording camera is an Ethernet camera, it can connect to SIYI image
transmission systems and third-party image transmission systems.
4.1 Connect to HM30 HD Image Transmission System
Connect the camera to HM30 air unit’s video input port, then use mobile device
to connect HM30 ground unit and run SIYI FPV app. In camera settings of SIYI
FPV app, choose “SIYI Camera 1” or the default RTSP addresses. After powering
on HM30 ground unit and air unit and binding them, we will see image from the
camera in SIYI FPV app.
Mark HM30 HD Image Transmission System support multiple ways of displaying and
outputting video stream. Please refer to the Chapter 6 of HM30 user manual for
details.
4.2 Connect to MK15 Mini Handheld Smart Controller
Connect the camera to MK15 air unit’s video input port, then turn on MK15
remote controller and run SIYI FPV app. In camera settings of SIYI FPV app,
choose “SIYI Camera 1” or the default RTSP addresses. After powering on MK15
air unit and
9 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
binding it to the remote controller, we will see image from the camera in SIYI
FPV app.
4.3 Connect to Third-Party Image Transmission Systems
R1 / R1M recording camera can output video stream to any third-party image
transmission systems which provide Ethernet port and are compatible with RTSP
video stream.
Before using the camera in this way, it is necessary to prepare the video cable for connection between R1 / R1M recording camera and the image transmission system.
CAUTION
R1 / R1M video output port’s “RX-” pinout should connect to the image
transmission system video port’s “RX-” pinout, and “RX+” pinout to “RX+”
pinout. Do not cross the pinouts, otherwise it will cause damage to the
device. R1 / R1M recording camera’s working voltage is from 12 V DC, please
make sure that the power voltage input is normal before wiring.
Steps
1. Power the air unit of the image transmission system and bind it with the ground
unit.
10 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
2. Use the video cable to connect ZR10 gimbal camera’s video output port and
the image transmission system’s video input port.
3. Open video display software and input the camera’s RTSP addresses
(rtsp://192.168.144.25:8554/main.264), if the video displays normally,
connection is successful.
4.4 Solutions to No Image from R1 / R1M Recording Camera
If R1 / R1M recording camera failed to output video or the video stream cannot
be displayed properly, please follow the steps below to investigate possible
reasons.
1. Confirm if the image transmission system ground unit is bound with the air
unit and confirm if the camera is connected to the air unit.
2. Open “SIYI FPV” app and check if the Camera IP is “SIYI Camera 1” (when
camera IP addresses are 192.168.144.25) or “SIYI Camera 2” (when camera IP
addresses are 192.168.144.26).
3. Check if the current IP addresses of R1 / R1M recording camera is
“192.168.144.25” or “192.168.144.26”. If not, please re-configure the IP
addresses.
Mark In SIYI FPV App’s Camera IP menu, customers can also input the full RTSP
addresses of
11 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
R1 / R1M recording camera to display video stream. If the video stream still
does not display, please follow the steps below and make a deep investigation
according to the video output mode and the video display device you use. 4.4.1
Video Output to An Android Device 1. Input the camera’s default IP addresses
“192.168.144.25” in the “Ping Tools”
app and check if the network communication is successful. If there is a
response, then check if the RTSP address in the SIYI FPV app is correct.
Successful Network Communication
12 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
Network Communication Failed 2. If the network communication is failed, then
please check if the communication
between the image transmission system’s ground unit and the air unit is
successful. If it is, then please check if the video cable between the camera
and the image transmission system’s air unit is good, and if the voltage input
is in normal range. 4.4.2 Video Output to A Windows Device 1. Use the “Win +
R” key combo to wake up the “Run” program and input the command “cmd”.
13 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
Successful Network Communication
Network Communication Failed 2. Input the camera’s default IP addresses
“192.168.144.25” and press the “Enter”
key to check if communication is successful. If it is successful, please check
if the RTSP addresses in the RTSP player is correct or try to switch to other
video players.
14 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
3. If the network communication is failed, then please check if the
communication between the image transmission system’s ground unit and the air
unit is successful. If it is, then please check if the video cable between the
camera and the image transmission system’s air unit is good, and if the
voltage input is in normal range.
Mark If you have done investigation by following all steps above, but the
reason is still not located, please contact your dealer or contact SIYI
Support immediately.
4.5 Common IP Addresses
R1 / R1M Recording Camera’s Default IP Addresses: 192.168.144.25 R1 / R1M
Recording Camera’s Default RTSP Addresses: rtsp://192.168.144.25:8554/main.264
SIYI FPV App’s “SIYI Camera 1” IP Addresses: 192.168.144.25 SIYI FPV App’s
“SIYI Camera 2” IP Addresses: 192.168.144.26
15 2022 SIYI Technology, All Rights Reserved
5 SIYI FPV APP
R1 R1M Recording Camera User Manual V1.0
SIYI FPV is an Android application developed by SIYI to configure multiple SIYI devices for image transmission settings, camera settings, video stream display, and link status monitor.
Mark The manual is edited based on SIYI FPV App v2.5.404. SIYI FPV App can be download from the SIYI official links.
SIYI FPV App compatible SIYI devices. MK15 / MK15E Mini HD Handheld Smart Controller HM30 Full HD Image Transmission System R1 / R1M HD Recording FPV Camera ZR10 2K QHD 30X Hybrid Zoom Gimbal Camera
16 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
SIYI FPV App OSD Information Definition
SIYI FPV Camera Function Icon Definition
17 2022 SIYI Technology, All Rights Reserved
5.1 Settings
R1 R1M Recording Camera User Manual V1.0
In the “Settings” page, you can configure camera IP Addresses, configure application interface, switch decoding type.
About Settings Camera IP: Select SIYI Camera 1 and SIYI Camera 2, or input
camera RTSP addresses manually, or disable image. The “Rotate” buttons can
rotate the image in 180 degrees. Cross Sight: Display a cross sight in the
center of the image. Map: Display the flight map at the left-bottom corner of
the app. OSD Color: Adjust the color of all OSD information. Decoding Type:
Switch between “Hardware Decoding” and “Software Decoding”. Please refer to
your video input device to choose the decoding type with the best performance.
18 2022 SIYI Technology, All Rights Reserved
5.2 Link Status
R1 R1M Recording Camera User Manual V1.0
Display the link status directly over the FPV image.
About Link Status OSD: Enable / disable standard OSD information. Mavlink OSD:
Enable / disable Mavlink OSD information. Speed Unit: Switch speed unit
between meter per seconds and kilometer per hour. Longitude and Latitude:
Enable / disable information.
5.3 Gimbal Camera
Configure the basic functions for SIYI gimbal cameras and cameras.
19 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
About Gimbal Camera Auto Record: Turn on / off automatically video recording
by TF card on gimbal camera start. Color Mode: Switch gimbal camera’s color
mode between Daylight and Night Vision. Resolution: Switch camera real-time
video streaming resolution between HD (720p) and Full HD (1080p). Motion Mode:
Switch gimbal motion mode between Lock Mode, Follow Mode, and FPV Mode. Under
Lock Mode, when the aircraft is rotating around yaw axis, gimbal won’t follow
to rotate until reaching to its limit position. Under Follow Mode, gimbal will
follow the aircraft’s rotation around yaw axis. Under FPV Mode, when the
aircraft is rotating around yaw axis, gimbal won’t follow to rotate until
reaching to its limit position, and if the aircraft can rotate around roll
axis, gimbal will follow. Camera Firmware Version: Display the current camera
firmware version.
20 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
Gimbal Firmware Version: Display the current gimbal firmware version. Zoom
Firmware Version: Display the current gimbal firmware version.
Mark After switching camera resolution, the gimbal camera should be restarted
to implement the change.
5.4 About SIYI FPV
Displays the software version of SIYI FPV and common contact information of
SIYI Technology.
21 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
6 Firmware Upgrade and Configuration
R1 / R1M camera can use SD / TF card for camera firmware update. Before
upgrading, it is necessary to prepare the tools, software, and firmware below.
SD / TF card
Mark Customers should prepare the above tools.
R1 / R1M camera firmware
Mark Above software and firmware can be downloaded from the R1 / R1M product
page in SIYI Official Store (https://shop.siyi.biz), or from the R1 / R1M
Google Drive Link, or got from your dealer.
22 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
R1 / R1M Recording Camera Google Drive Link:
https://drive.google.com/drive/folders/169FRyJPVFci6Ojg7KgH23l6kyMi70ghG?usp=sha
ring Firmware Upgrade Steps 1. Save the camera firmware’s “.bin” file to the
SD / TF card’s root directory and do
not change the file name.
2. Restart the camera and wait for three to five minutes, camera firmware
will be flashed automatically.
3. Run SIYI FPV app to check if the camera firmware is updated or check from
the “curip.txt” file in the SD card just used.
23 2022 SIYI Technology, All Rights Reserved
7 After-sale Service
R1 R1M Recording Camera User Manual V1.0
If there were any questions or problems using SIYI Technology’s product, you can always try to send an email to SIYI Official A/S Center (support@siyi.biz) or consult your sales representative or dealer for answers or solutions.
8.1 Repair Service
If your purchased SIYI products cannot work properly, please contact SIYI
Official A/S Center for consulting.
Usually there are two situations for acquiring repair service. Product Defect
Product Damage
SIYI products under the two situations can be sent back to SIYI for repairing.
Defect products with valid warranty can be repaired for free. Defect products
without valid warranty or damaged products should be charged of repair fees
after repairing. Please refer to SIYI’s Official A/S Quotation for detail.
24 2022 SIYI Technology, All Rights Reserved
8.2 Warranty
R1 R1M Recording Camera User Manual V1.0
SIYI Technology guarantees that, subject to the following conditions, Return & Refund Service, Replacement Service, and Warranty Repair Service can be requested. Please contact SIYI directly (support@siyi.biz or your sales manager) or authorized SIYI dealer for more detail.
8.2.1 7-Day Return & Refund
You can request Return & Refund Service:
Within seven (7) days of receiving a product if the product has no manufacturing defect, has not been activated and is still in new or like-new condition.
Within seven (7) days of receiving a product if the product has a manufacturing defect.
Return & Refund Service will not be provided where:
It is requested beyond seven (7) calendar days of receiving a product.
A product sent to SIYI for Return & Refund Service does not include all original accessories, attachments or packaging, or any item is not in new or like-new condition, i.e., with cracks, dents, or scratches.
A legal proof of purchase, receipt or invoice is not provided or is reasonably
believed to have been forged or tampered with.
25
2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
Any fault or damage of the product is caused by unauthorized use or
modification of the product, including exposure to moisture, entry of foreign
bodies (water, oil, sand, etc.) or improper installation or operation. Product
labels, serial numbers, waterproof marks, etc. show signs of tampering or
alteration. Damage is caused to the product by uncontrollable external
factors, including fire, floods, high winds, or lightning strikes. A product
is not delivered to SIYI within seven (7) calendar days after Return & Refund
Service confirmation is sent from SIYI. Other circumstances stated in this
policy.
8.2.2 15-Day Replacement
You can request Replacement Service: Within fifteen (15) calendar days of
receiving the product if the product has sustained a substantial damage in
transit, provided always that the damage proof issued by the carrier can be
provided to SIYI. Within fifteen (15) calendar days of receiving the product
if the product does not match the original description of the product in one
or more significant respects.
26 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
Within fifteen (15) calendar days of receiving the product if the product
suffers performance failure.
Replacement Service will not be provided where:
Service is requested more than fifteen (15) calendars days after receiving a
product.
Legal proof-of-purchase, receipts, or invoices are not provided, or are
reasonably believed to have been forged or tampered with.
A product sent to SIYI for replacement does not include all original
accessories, attachments, and packaging, or contains items damaged by user
error.
A product is found to have no defects after all appropriate tests are
conducted by SIYI.
Any fault or damage of the product is caused by unauthorized use or
modification of the product, including exposure to moisture, entry of foreign
bodies (water, oil, sand, etc.) or improper installation or operation.
Damage is caused by uncontrollable external factors, including fires, floods,
high winds, or lightning strikes.
Received product has not been sent back to SIYI seven (7) calendar days after
replacement confirmation from SIYI.
Proof of damage during transit issued by the carrier cannot be provided.
27 2022 SIYI Technology, All Rights Reserved
Other circumstances stated in this policy.
R1 R1M Recording Camera User Manual V1.0
8.2.3 1-Year Warranty Repair
You can request warranty repair service:
If a product does not function as warranted during the warranty period, you
may obtain after-sales service by contacting SIYI’s service center. You will
need to provide a valid proof-of-purchase, receipt, or order number for the
warranty service.
Charges may apply for services not covered by this Limited Warranty. Please
contact SIYI for information specific to your location.
Please note that the warranty service is only available in the respective SIYI
service regions where you purchased your SIYI product.
Warranty Repair service will not be provided where:
Crashes or fire damage caused by non-manufacturing factors, including but not
limited to pilot errors.
Damage caused by unauthorized modification, disassembly, or shell opening not
in accordance with official instructions or manuals.
Damage caused by improper installation, in correct use, or operation not in
accordance with official instructions or manuals.
28 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
Damage caused by non-authorized service provider. Damage caused by
unauthorized modification of circuits and mismatch or misuse of the battery
and charger. Damage caused by operation in bad weather (i.e., strong winds,
rain, sand/dust storms, etc.) Damage caused by operating the product in an
environment with electromagnetic interference (i.e., in mining areas or close
to radio transmission towers, high-voltage wires, substations, etc.) Damage
caused by operating the product in an environment suffering from interference
from other wireless devices (i.e., transmitter, video-downlink, Wi-Fi signals,
etc.) Damage caused by reliability or compatibility issues when using
unauthorized third-party parts. Damage caused by operating the unit with a
low-charged or defective battery. Products or parts with an altered
identification label or from which the identification label has been removed.
29 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
SIYI Technology (Shenzhen) Co., Ltd Business Inquiry: info@siyi.biz Phone: +86
400 838 2918
30 2022 SIYI Technology, All Rights Reserved
R1 R1M Recording Camera User Manual V1.0
A/S Center: support@siyi.biz
31 2022 SIYI Technology, All Rights Reserved
References
- SIYI Official Store - UAV Gimbal Camera, Drone Remote Controller, HD Image Transmission System and Datalink, RC Hobby Radio
- siyi.aliexpress.com
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>