nVent MAC2SF MC AC Cable Clip with Shot Fire Bracket Owner’s Manual

June 16, 2024
nVent

MC/AC CABLE CLIP WITH SHOT-FIRE BRACKET, 14-2 TO 10-3 MC/AC

CATALOG NUMBER

MAC2SF

FEATURES

Provides easy snap-in installation of up to two MC/AC cables
Complete with shot-fire bracket and pre-assembled drive pin from DEWALT®
Quickly and easily attaches to concrete, steel or composite metal decking
Integrated pin installs easily using powder-actuated or single-shot gas- actuated tools
ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT®

PRODUCT ATTRIBUTES

Material: Steel;Spring Steel
Finish: Electrogalvanized;nVent CADDY Armour
MC/AC Cable Size: 14-2 to 10-3
Height: 2 3/8″
Width: 2 3/16″
A: 1.300″

ADDITIONAL PRODUCT DETAILS

Uses Powers Fasteners, Inc. part number 50032.
Pre-assembled drive pin from Powers Fasteners, Inc. works with Powers® C4CZ, Simpson® GCN-MEPKT, SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60, P7201, Sniper; Ramset® 721, Cobra, D45 / D60 / D60L, M70, SA270, T3SS, TS750P, TS60P, Viper; Hilti® DX35, DX350 / DX351 / DX36M, DX100 / DX200, DX460, DXA40, DXA41,​ DXE72 / DX400; Würth® Diva-1, BST-1, BST-2 or equivalent nailers.

DIAGRAMS

WARNING

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support| Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
---|---
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793| APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500

Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

References

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>

Related Manuals