nVent CA0037EG Drop In Anchor Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
DROP-IN ANCHOR, STEEL, EG, 3/8″ HOLE, 1.563″
Owner’s Manual
CATALOG NUMBER
CA0037EG
FEATURES
Internal thread provides easy removal and serviceability
Installs flush or below the base surface
Suitable for redundant non-structural systems on cracked and non-cracked
concrete
Fire resistance class R30-R120 for design of anchorages under exposure to fire
PRODUCT ATTRIBUTES
Material: Steel
Finish: Electrogalvanized
Hole Size: 3/8″
Length: 1 9/16″
Drill Bit Diameter: 1/2″
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support| Europe
Netherlands: +31 800-0200135
France: +33 800 901 793
---|---
Europe
Germany: 800 1890272
Other Countries: +31 13 5835404| APAC
Shanghai: + 86 21 2412 1618/19
Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>