nVent TSNT0025EG Strut Nut With Top Spring Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent TSNT0025EG Strut Nut With Top Spring
FEATURES
- Used to create metal frames with nVent CADDY Eristrut channels
- Spring allows for easy installation
PRODUCT ATTRIBUTES
- Material: Steel
- Finish: Electrogalvanized
- Static Load Safety Factor: 3:1
- Rod Size: 1/2″
- Thickness: 1/2″
- Torque: 50 ft lb
Pull-Out Strength
Part Number
|
Channel Type
| Channel Thickness
12 GA| 14 GA
TSNT0025EG
| A, C| 450 lb| 450 lb
D, E| 450 lb| –
TSNT0037EG
| A, C| 1,100 lb| 1,000 lb
D, E| 1,100 lb| –
TSNT0050EG
| A| 2,000 lb| 1,400 lb
D, E| 1,500 lb| –
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent
customer service representative. Improper installation, misuse, misapplication
or other failure to completely follow nVent’s instructions and warnings may
cause product malfunction, property damage, serious bodily injury and death
and/or void your warranty.
North America
+1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.