nVent 812MB18A CADDY Combination Box Conduit Hanger Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent 812MB18A CADDY Combination Box Conduit Hanger
The nVent CADDY Combination Box/Conduit Hanger is a fast and secure method to install a wide range of electricalboxes/conduits in overhead installations with a single-threaded rod drop. The system is designed to provide greater efficiency in the field with our class-leading range of nVent CADDY Snap Close Conduit Clamps and innovative nVent CADDY 512X Electrical Box Mounting Clip.
CERTIFICATIONS
FEATURES
- One assembly provides support for horizontal electrical box and conduit from threaded rod
- Eliminates need for offset bending conduit
- Provides independent first means of support for conduit and/or MC/AC cable NEC® & CEC compliant
- Ideal means of support when used with the nVent CADDY 512X Electrical Box Mounting Clip (with offset)
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- EMT Conduit Size: 1/2″;3/4″
- Hole Size: 1/4″
- Hole Type: Plain
- Screw Included: No
ADDITIONAL PRODUCT DETAILS
NEC® 300.11 requires dedicated drop wire/rod. For single and multiple runs
of conduit.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America
+1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.