nVent 2EBN Fixture Support From Plain Rod Wire 8 Wire Owner’s Manual Product Information Product Usage Instructions FAQ
- January 7, 2024
- nVent
Table of Contents
- 2EBN Fixture Support From Plain Rod Wire 8 Wire
- Product Information
- Specifications
- Features
- Warning
- Contact Information
- Brands
- Disclaimer
- Product Usage Instructions
- Installation
- Maintenance
- Removal
- Cleaning
- Additional Information
- FAQ
- Q: Can I use a different wire size with this fixture
- Q: Are installation tools required for this product?
- Q: Can the fixture support hold heavy fixtures?
2EBN Fixture Support From Plain Rod Wire 8 Wire
Product Information
Specifications
- Catalog Number: 2EBN
- Material: Spring Steel
- Finish: nVent CADDY Armour
- Wire Size: #8
Features
- No tools required for installation
- Eliminates the use of nut and allows the use of plain rod
Warning
nVent products shall be installed and used only as indicated in
nVent’s product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and from
your nVent customer
service representative. Improper installation, misuse,
misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property
damage, serious bodily injury and death and/or void your
warranty.
Contact Information
If you have any questions or need assistance, please contact our
customer service representatives:
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: +86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Brands
Our powerful portfolio of brands:
- nVent.com
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
Disclaimer
All brands mentioned are the property of their respective
owners. nVent reserves the right to change specifications without
notice.
Product Usage Instructions
Installation
To install the fixture support from plain rod/wire using #8
wire, follow these steps:
-
Ensure that the installation area is clean and free from any
obstructions. -
Select the desired location for the fixture support.
-
Insert the plain rod/wire through the designated holes in the
fixture support. -
Secure the plain rod/wire in place by tightening it.
-
Ensure that the fixture support is securely attached and can
hold the weight of the fixture.
Maintenance
Regularly inspect the fixture support to ensure that it is still
securely attached and functioning properly. If any issues are
detected, refer to the product instruction sheets or contact nVent
customer service for assistance.
Removal
To remove the fixture support, follow these steps:
-
Disconnect any power supply to the fixture.
-
Loosen and remove the plain rod/wire from the fixture
support. -
Gently remove the fixture support from its mounted
position.
Cleaning
Use a clean, damp cloth to wipe down the fixture support and
remove any dust or debris. Do not use abrasive cleaners or
solvents, as they may damage the finish.
Additional Information
For additional information on the product, refer to the
instruction sheets available at www.nvent.com or contact
nVent customer
service.
FAQ
Q: Can I use a different wire size with this fixture
support?
A: No, this fixture support is designed specifically for use
with #8 wire.
Q: Are installation tools required for this product?
A: No, this product does not require any tools for
installation.
Q: Can the fixture support hold heavy fixtures?
A: Yes, the fixture support is designed to securely hold the
weight of fixtures. However, it is important to ensure that the
installation is done correctly and the fixture support is securely
attached.
FIXTURE SUPPORT FROM PLAIN ROD/WIRE, #8 WIRE
CATALOG NUMBER
2EBN
FEATURES
No tools required for installation Eliminates the use of nut and allows the
use of plain rod
PRODUCT ATTRIBUTES
Material: Spring Steel Finish: nVent CADDY Armour Wire Size: #8
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America +1.800.753.9221 Option 1 Customer Care Option 2 Technical Support
Europe Netherlands: +31 800-0200135 France: +33 800 901 793
Europe Germany: 800 1890272 Other Countries: +31 13 5835404
APAC Shanghai: + 86 21 2412 1618/19 Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of
2
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent