nVent 2EBN Fixture Support From Plain Rod Wire 8 Wire Owner’s Manual

nVent 2EBN Fixture Support From Plain Rod Wire 8 Wire

Product Information

Specifications

• Catalog Number: 2EBN
• Material: Spring Steel
• Finish: nVent CADDY Armour
• Wire Size: #8

Warning

nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death or void your warranty.

Contact Information

If you have any questions or need assistance, please contact our customer service representatives:

• Europe Netherlands: +31 800-0200135
• France: +33 800 901 793
• Germany: 800 1890272
• Other Countries: +31 13 5835404
• APAC Shanghai: +86 21 2412 1618/19
• Sydney: +61 2 9751 8500

Brands

Our powerful portfolio of brands:

• nVent.com
• CADDY
• ERICO
• HOFFMAN
• RAYCHEM
• SCHROFF
• TRACER

Disclaimer

All brands mentioned are the property of their respective owners. nVent reserves the right to change specifications without notice.

Product Usage Instructions

Installation

To install the fixture support from plain rod/wire using #8 wire, follow these steps:

Ensure that the installation area is clean and free from any obstructions. Select the desired location for the fixture support.

1. Insert the plain rod/wire through the designated holes in the fixture support.
2. Secure the plain rod/wire in place by tightening it.
3. Ensure that the fixture support is securely attached and can hold the weight of the fixture.

Maintenance

Regularly inspect the fixture support to ensure that it is still securely attached and functioning properly. If any issues are detected, refer to the product instruction sheets or contact nVent customer service for assistance.

Removal

To remove the fixture support, follow these steps:

1. Disconnect any power supply to the fixture.
2. Loosen and remove the plain rod/wire from the fixture support.
3. Gently remove the fixture support from its mounted position.

Cleaning

Use a clean, damp cloth to wipe down the fixture support and remove any dust or debris. Do not use abrasive cleaners or solvents, which may damage the finish.

Additional Information

For additional information on the product, refer to the instruction sheets available at www.nvent.com or contact nVent customer service.

FAQ

• Q: Can I use a different wire size with this fixture support?
• A: No, this fixture support is designed specifically for use with #8 wire.
• Q: Are installation tools required for this product?
• A: No, this product does not require any tools for installation.
• Q: Can the fixture support hold heavy fixtures?
• A: Yes, the fixture support is designed to hold the weight of fixtures securely. However, it is important to ensure that the installation is done correctly and the fixture support is securely attached.

CATALOG NUMBER

• 2EBN

FEATURES

• No tools are required for installation
• Eliminates the use of nuts and allows the use of plain rod

PRODUCT ATTRIBUTES

• Material: Spring Steel
• Finish: nVent CADDY Armour
• Wire Size: #8

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and void your warranty.

CONTACT

North America

• +1.800.753.9221
• Option 1 – Customer Care
• Option 2 – Technical Support

Europe

• Netherlands:
• +31 800-0200135
• France:
• +33 800 901 793

Europe

• Germany:
• 800 1890272
• Other Countries:
• +31 13 5835404

APAC

• Shanghai:
• + 86 21 2412 1618/19
• Sydney:
• +61 2 9751 8500

© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners. nVent reserves the right to change specifications without notice.Our powerful portfolio of brands:
nVent.com. CADDY ERICO HOFFMAN RAYCHEM SCHROFF TRACER.

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>