nVent C2416SM H-Msmr Conduit To Flange Clip with Retainer Side Mount 1 Inch Emt 1 8 Inch 1 4 Inch Flange Owner’s Manual

nVent C2416SM H-Msmr Conduit To Flange Clip with Retainer Side Mount 1

Inch Emt 1 8 Inch 1 4 Inch Flange

Product Information

Specifications

• Catalog Number: C2416SM
• Features:
  • Only one piece to install
  • Fast hammer-on installation
  • Pre-riveted retainer strap is easily bent into position
  • Lightweight design

Product Usage Instructions

Installation

1. Ensure you have read and understood the product instruction sheets available at www.nvent.com or from your nVent customer service representative.
2. Identify the desired location for installation.
3. Carefully position the product in the designated location.
4. Using a hammer, firmly strike the product to secure it in place.

Retainer Strap Adjustment

1. Gently bend the pre-riveted retainer strap into the desired position.
2. Ensure the retainer strap securely holds the desired object or component.

Product Maintenance
To ensure optimal performance and longevity of the product, follow these maintenance guidelines:

• Regularly inspect the product for any signs of damage or wear.
• Clean the product using a mild detergent and a soft cloth.
• Avoid using abrasive cleaners or solvents that may damage the product.

FAQ

• Q: Where can I find the product instruction sheets?
  A: The product instruction sheets can be found at www.nvent.com or you can request them from your nVent customer service representative.

• Q: Can I install the product in any location?
  A: The product can be installed in any suitable location as long as it meets the requirements specified in the product instruction sheets.

• Q: How do I adjust the retainer strap?
  A: Gently bend the pre-riveted retainer strap into the desired position to securely hold the desired object or component.

• Q: How should I clean the product?
  A: Clean the product using a mild detergent and a soft cloth. Avoid using abrasive cleaners or solvents that may damage the product.

FEATURES

• Only one piece to install
• Fast hammer-on installation
• Pre-riveted retainer strap is easily bent into position
• Lightweight design

PRODUCT ATTRIBUTES

• Material: Spring Steel
• Finish: nVent CADDY Armour
• EMT Conduit Size: 3/4″;1″
• Rigid Conduit/Pipe Size: 3/4″;1″
• Outer Diameter: 0.922″ – 1.378″
• Flange Thickness: 1/8″ – 1/4″
• Length: 13″
• Static Load: 25 lb

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.

North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support

Europe

• Netherlands: +31 800-0200135
• France: +33 800 901 793

Europe

• Germany: 800 1890272
• Other Countries: +31 13 5835404

APAC

• Shanghai: + 86 21 2412 1618/19
• Sydney: +61 2 9751 8500

© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

nVent.com

References

• Building a more Sustainable and Electrified World | nVent
• Building a more Sustainable and Electrified World | nVent

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>