nVent BC12PSM BC-PSM Conduit to Beam Clamp Owner’s Manual

nVent BC12PSM BC-PSM Conduit to Beam Clamp

Specifications

• Catalog Number: BC12PSM
• Material: Spring Steel
• Finish: nVent CADDY Armour
• EMT Conduit Size: 3/4″
• Flange Thickness: 1/2″
• Max Ultimate Static Load: 1 5 lb

Product Attributes

• Material: Spring Steel
• Finish: nVent CADDY Armour
• EMT Conduit Size: 3/4″
• Flange Thickness: 1/2″
• Max Ultimate Static Load: 15 lb

Brands
Our powerful portfolio of brands:

• nVent.com
• CADDY
• ERICO
• HOFFMAN
• RAYCHEM
• SCHROFF
• TRACER

Disclaimer
All trademarks and brand names mentioned above are the property of their respective owners. nVent reserves the right to change specifications without notice.

Product Usage Instructions

To install the BC-PSM Conduit to Beam Clamp, follow the steps below:

Step 1: Prepare the materials
Gather the following materials:
BC-PSM Conduit to Beam Clamp (Catalog Number: BC12PSM) 3/4″ EMT Conduit

Step 2: Position the clamp
Position the BC-PSM Conduit to the Beam Clamp on the beam flange where you want to install the conduit.

Step 3: Tighten the clamp
Using a suitable tool, tighten the clamp securely to the beam flange. Ensure that the clamp is properly aligned and secured in place.

Step 4: Install the conduit
Insert the 3/4″ EMT Conduit into the BC-PSM Conduit to Beam Clamp. Make sure the conduit is properly seated and secured within the clamp.

Step 5: Repeat if necessary
If you need to install multiple conduits, repeat steps 2-4 for each conduit.

FEATURES

• Easy installation to beam flanges
• Eliminates offset bending conduit

PRODUCT ATTRIBUTES

• Material: Spring Steel
• Finish: nVent CADDY Armour
• EMT Conduit Size: 3/4″
• Flange Thickness: 1/2″ Max
• Ultimate Static Load: 15 lb

DIAGRAMS

WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication, or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury, and death and/or void your warranty.

FAQ

• Can I use this clamp with a different size of conduit?
  • No, the BC-PSM Conduit to Beam Clamp is specifically designed for use with 3/4″ EMT Conduit.
• What is the maximum static load this clamp can support?
  • The BC-PSM Conduit to Beam Clamp has a maximum ultimate static load of 15 lb.
• Is the clamp compatible with different types of beam flanges?
  • Yes, the BC-PSM Conduit to Beam Clamp is designed for easy installation to beam flanges.
• Can I install this clamp without bending the conduit?
  • Yes, the BC-PSM Conduit to Beam Clamp eliminates the need for offset bending of the conduit.

CONTACT

North America

• +1.800.753.9221
• Option 1 – Customer Care
• Option 2 – Technical Support

Europe Netherlands

• +31 800-0200135

France

• +33 800 901 793

Europe Germany

• 800 1890272

Other Countries

• +31 13 5835404
• APAC

Shanghai

• + 86 21 2412 1618/19

Sydney

• +61 2 9751 8500

© 2023 nVent. All nVent marks and logos are owned or licensed by nVent Services GmbH or its affiliates. All other trademarks are the property of their respective owners.
nVent reserves the right to change specifications without notice.

nVent.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>