nVent TRC112 Caddy Swift Clip Threaded Rod Attachment Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent TRC112 Caddy Swift Clip Threaded Rod Attachment
Product Information
Specifications
- Product Name: nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT
- Outer Diameter: 1 1/8 inches
- Copper Tube Size: 1 inch
- Rod Size: 3/8 inches
- Catalog Number: TRC112
Features
- Easy and secure attachment to threaded rods
- Designed for use with 1 1/8 inch outer diameter pipes
- Compatible with 1-inch copper tubes and 3/8-inch rods
Product Attributes
The nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT offers the following
attributes:
- Secure and reliable installation
- Durable construction for long-lasting performance
- Efficient and time-saving installation process
Additional Product Details
This product is designed to provide a convenient solution for attaching
threaded rods to pipes. It ensures a secure connection and is compatible with
various pipe sizes. The nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT is
built to withstand the demands of different applications, offering reliability
and durability.
WARNING: nVent products must be installed and used according to nVent’s product instruction sheets and training materials. Failure to follow instructions and warnings may result in product malfunction, property damage, serious bodily injury, death, and/or voiding of the warranty.
Contact Information
If you have any questions or need further assistance, please contact nVent
customer service representatives:
- Europe Netherlands: +31 800-0200135
- France: +33 800 901 793
- Germany: 800 1890272
- Other Countries: +31 13 5835404
- APAC Shanghai: +86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Visit www.nvent.com for more information about our powerful portfolio of brands. nVent, CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, and TRACER are trademarks or registered trademarks of their respective owners. nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Preparation
Before starting the installation process, ensure that you have the following
tools and materials:
- nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT
- Threaded rod
- 1-inch copper tube
- 3/8-inch rod
- Fasteners (if required)
- Installation manual
Step 2: Positioning
Determine the desired location for the attachment and mark the positions where
the threaded rod, copper tube, and rod will be installed.
Step 3: Installation
- Insert the threaded rod into the nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT.
- Position the attachment on the marked location and align it with the threaded rod.
- Securely fasten the attachment to the surface using appropriate fasteners (if required).
- Slide the 1-inch copper tube onto the threaded rod until it reaches the desired position.
- Attach the 3/8-inch rod to the threaded rod using compatible connectors or fasteners.
Step 4: Finalizing
Ensure that all connections are secure and properly tightened. Double-check
the alignment and positioning of the attached components. Make any necessary
adjustments to achieve the desired installation.
Maintenance
Regularly inspect the nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT and its
connections for signs of wear or damage. If any issues are detected, promptly
address them to maintain optimal performance and safety.
FAQ
-
Q: Can this attachment be used with different pipe sizes?
A: Yes, the nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT is compatible with 1-inch copper tubes and 3/8-inch rods. -
Q: Is this product suitable for outdoor installations?
A: Yes, the nVent CADDY SWIFT CLIP THREADED ROD ATTACHMENT is designed to withstand various environmental conditions and can be used for outdoor installations. -
Q: How can I obtain additional product instruction sheets?
A: Additional product instruction sheets can be found on the nVent website at www.nvent.com. You can also contact nVent customer service representatives for assistance.
FEATURES
- Snap-on and twist installation requires no tools
- Easily adjusts by rotating up or down on the threaded rod
- For support and positioning of refrigeration, A/C tubing, PEX piping, conduit and cabling
- Secures pipe and insulation without any breaks
- Compliant with UL® 2043 and suitable for use in air handling (plenum) spaces
PRODUCT ATTRIBUTES
- Material: Polyamide
- Working Temperature: -40 to 284 °F
- Outer Diameter: 1 1/8″
- Copper Tube Size: 1″
- Rod Size: 3/8″
ADDITIONAL PRODUCT DETAILS
Clip must be installed with temperature at or above 14 °F (-10 °C).
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials. Instruction sheets are
available at www.nvent.com and from your nVent customer service
representative. Improper installation, misuse, misapplication or other failure
to completely follow nVent’s instructions and warnings may cause product
malfunction, property damage, serious bodily injury and death and/or void your
warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
- France: +33 800 901 793
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>