nVent CAT21HPD1BC2 Caddy Cat Hp Double J Hook With Bc200 Beam Clamp Swivel Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
NVENT CADDY CAT HP DOUBLE J-HOOK WITH BC200 BEAM CLAMP, SWIVEL
FEATURES
Low-profile configuration providing double J-Hook capacity
Easy installation to beam flanges
Rotates 360 degrees to support various directional runs of cable
Provides optimal support for high-performance data cable, up to and including
Cat 5e, Cat 6, Cat 6A, Cat 7 and fibre optic
Provides superior fill capacity and load rating over most other non-continuous
cable support alternatives
Rounded edges on J-Hooks provide proper bend radius support for high
performance data cables
Cost effective alternative to expensive cable tray
Complies with EN 50174-2
Meets ISO®/IEC 14763-2, ANSI®/TIA 568 and ANSI®/TIA 569
SPECIFICATIONS
Finish: Pregalvanized;Electrogalvanized
Material: Steel
| Catalog Number | Diameter(Ø) | Flange Thickness(FT) | Width(W) | A | Static Load(F) |
|---|---|---|---|---|---|
| CAT21HPD1BC2 | 1 5/16″ | 1/2″ Max | 5 1/8″ | 4 7/8″ | 100 lb |
| CAT32HPD1BC2 | 2″ | 1/2″ Max | 6 1/2″ | 5 1/8″ | 100 lb |
| CAT48HPD1BC2 | 3″ | 1/2″ Max | 8 1/2″ | 6 3/4″ | 100 lb |
| CAT64HPD1BC2 | 4″ | 1/2″ Max | 10 1/2″ | 7 3/4″ | 100 lb |
ADDITIONAL PRODUCT DETAILS
Static load limit of each J-Hook is 60 lb (270 N).
Setscrew must be tightened and torqued onto the sloped side of the I-beam.
Non-continuous supports may not exceed spacing of 5′ (1.5 m) per TIA 569-C.9.7
and EN 50174-2.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support| Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793| Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404| APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
---|---|---|---
Our powerful portfolio of brands:
nVent.com CADDY ERICO HOFFMAN RAYCHEM SCHROFF
TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>