nVent CRLAKITA CADDY Rod Lock Anchor Screw Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent CRLAKITA CADDY Rod Lock Anchor Screw
Product Information
- Specifications
- Catalog Number: CRLAKITA
- Material: Steel
- Socket Width: 22 mm
Features
- The nVent CADDY Rod Lock Anchor Screw Drive Socket is designed for quick installation of the nVent CADDY Rod Lock Anchor Screw.
WARNING
nVent products must only be installed and used as instructed in nVent’s product instruction sheets and training materials. Improper installation, misuse, misapplication, or failure to follow instructions and warnings may result in product malfunction, property damage, serious bodily injury, death, and may void your warranty. Please refer to the instruction sheets available at www.nvent.com or contact your nVent customer service representative for more information.
Brands
- nVent is a trusted provider of various brands including CADDY, ERICO, HOFFMAN, RAYCHEM, SCHROFF, and TRACER. All trademarks belong to their respective owners.
Disclaimer
- nVent reserves the right to change specifications without notice.
Product Usage Instructions
Step 1: Preparation
Before using the nVent CADDY Rod Lock Anchor Screw Drive Socket, make sure you have the following:
- nVent CADDY Rod Lock Anchor Screw
- nVent CADDY Rod Lock Anchor
- nVent CADDY Rod Lock Anchor Screw Drive Socket
Step 2: Insertion
Insert the nVent CADDY Rod Lock Anchor Screw Drive Socket into the designated hole on the nVent CADDY Rod Lock Anchor.
Step 3: Attachment
Attach the nVent CADDY Rod Lock Anchor Screw Drive Socket firmly to the nVent CADDY Rod Lock Anchor by rotating it clockwise until secure.
Step 4: Fastening
- Insert the nVent CADDY Rod Lock Anchor Screw into the socket of the nVent CADDY Rod Lock Anchor Screw Drive Socket.
- Using a suitable tool, such as a wrench or screwdriver, tighten the nVent CADDY Rod Lock Anchor Screw by rotating it clockwise until fastened securely.
Step 5: Verification
- Ensure that the nVent CADDY Rod Lock Anchor Screw is tightly secured and properly fastened to the nVent CADDY Rod Lock Anchor.
Step 6: Testing
- Perform any necessary load tests or inspections to ensure the stability and reliability of the installation.
Step 7: Maintenance
- Regularly inspect the nVent CADDY Rod Lock Anchor Screw, nVent CADDY Rod Lock Anchor, and nVent CADDY Rod Lock Anchor Screw Drive Socket for any signs of damage or wear. Replace any damaged components immediately.
Step 8: Disassembly
- To disassemble the nVent CADDY Rod Lock Anchor Screw, follow the reverse order of the installation steps.
Frequently Asked Questions
- Q: Can I use the nVent CADDY Rod Lock Anchor Screw Drive Socket with other brands of anchor screws?
- A: The nVent CADDY Rod Lock Anchor Screw Drive Socket is specifically designed for use with nVent CADDY Rod Lock Anchor Screws. Using it with other brands may result in improper installation or compatibility issues.
- Q: How do I know if the nVent CADDY Rod Lock Anchor Screw is securely fastened?
- A: Ensure that you tighten the nVent CADDY Rod Lock Anchor Screw using a suitable tool until it is firmly in place. Perform any recommended load tests or inspections to verify the stability of the installation.
- Q: Can I reuse the nVent CADDY Rod Lock Anchor Screw Drive Socket?
- A: The nVent CADDY Rod Lock Anchor Screw Drive Socket is designed for repeated use. However, always inspect it for any signs of damage or wear before each use. Replace any damaged or worn-out drive sockets.
FEATURES AND SPECIFICATIONS
FEATURES
- Drive socket for quick installation of nVent CADDY Rod Lock Anchor Screw
SPECIFICATIONS
| Catalog Number | Material | Socket Width |
|---|---|---|
| CRLAKITA | Steel | 22 mm |
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
Contacts
North America
- +1.800.753.9221
- Option 1 – Customer Care
- Option 2 – Technical Support
Europe
- Netherlands: +31 800-0200135
Europe
- Germany: 800 1890272
- Other Countries: +31 13 5835404
APAC
- Shanghai: + 86 21 2412 1618/19
- Sydney: +61 2 9751 8500
Our powerful portfolio of brands:
- CADDY
- ERICO
- HOFFMAN
- RAYCHEM
- SCHROFF
- TRACER
© 2023 nVent. All nVent marks and logos are owned or licensed by nVent
Services GmbH or its affiliates. All other trademarks are the property of
their respective owners.
nVent reserves the right to change specifications without notice.
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent