nVent 708SF CADDY Push Install Rod Wire Hanger with Shot Fire Bracket Owner’s Manual
- June 16, 2024
- nVent
Table of Contents
nVent 708SF CADDY Push Install Rod Wire Hanger with Shot Fire Bracket
FEATURES
- Permits pre-assembly of wire or plain rod.
- Suspends wire or plain rod from horizontal structures.
- Complete with shot-fire bracket and pre-assembled drive pin from DEWALT®.
- Quickly and easily attaches to concrete, steel or composite metal decking.
- Integrated pin installs easily using powder-actuated or single-shot gas-actuated tools.
- ICC-ES ESR-2024 evaluation report available for drive pin from DEWALT®.
PRODUCT ATTRIBUTES
- Material: Steel; Spring Steel
- Finish: Electrogalvanized;nVent CADDY Armour
- Rod Size: 1/4″
- Wire Size: #8
- Height: 3 1/16″
- Width: 2 1/4″
- A: 1.300″
- Static Load: 100 lb
ADDITIONAL PRODUCT DETAILS
Uses Powers Fasteners, Inc. part number 50032.
Static load was established based on a 1” (25.4 mm) embedment depth and 3,000
psi (20.68 MPa) lightweight concrete. For variations in embedment and material
please consult anchors.dewalt.com.
Pre-assembled drive pin from Powers Fasteners, Inc. works with Powers® C4CZ,
Simpson® GCN-MEPKT, SPIT® P1000, P200, P2201, P3500 / PA3500, P35s, P45, P60,
P7201, Sniper; Ramset® 721, Cobra, D45 / D60 / D60L,
M70, SA270, T3SS, TS750P, TS60P, Viper; Hilti® DX35, DX350 / DX351 / DX36M,
DX100 / DX200, DX460, DXA40, DXA41, DXE72 / DX400; Würth® Diva-1, BST-1,
BST-2 or equivalent nailers.
For shot-fired supports in seismic design category D, E, or F, maximum load is
the lesser of 90 lb (400 N) or the published load.
DIAGRAMS
WARNING
nVent products shall be installed and used only as indicated in nVent’s product instruction sheets and training materials. Instruction sheets are available at www.nvent.com and from your nVent customer service representative. Improper installation, misuse, misapplication or other failure to completely follow nVent’s instructions and warnings may cause product malfunction, property damage, serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care Option 2 – Technical Support
Europe Netherlands:
+31 800-0200135 France:
+33 800 901 793
Europe Germany:
800 1890272 Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19 Sydney:
+61 2 9751 8500
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>