nVent CM2416M Em-Mr Conduit To Flange Clip with Retainer Datasheet
- June 16, 2024
- nVent
Table of Contents
nVent CM2416M Em-Mr Conduit To Flange Clip with Retainer Datasheet
FEATURES
- Only one piece to install
- Fast hammer-on installation
- Pre-riveted retainer strap is easily bent into position
PRODUCT ATTRIBUTES
- Material: Spring Steel
- Finish: nVent CADDY Armour
- EMT Conduit Size: 3/4″;1″
- Rigid Conduit/Pipe Size: 3/4″;1″
- Outer Diameter: 0.922″ – 1.378″
- Flange Thickness: 1/8″ – 1/4″
- Static Load: 75 lb
WARNING
nVent products shall be installed and used only as indicated in nVent’s
product instruction sheets and training materials.
Instruction sheets are available at www.nvent.com and
from your nVent customer service representative. Improper installation,
misuse, misapplication or other failure to completely follow nVent’s
instructions and warnings may cause product malfunction, property damage,
serious bodily injury and death and/or void your warranty.
North America
+1.800.753.9221
Option 1 – Customer Care
Option 2 – Technical Support
Europe
Netherlands:
+31 800-0200135
France:
+33 800 901 793
Europe
Germany:
800 1890272
Other Countries:
+31 13 5835404
APAC
Shanghai:
+ 86 21 2412 1618/19
Sydney:
+61 2 9751 8500
References
- Building a more Sustainable and Electrified World | nVent
- Building a more Sustainable and Electrified World | nVent
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>