Maeve LXL124552 Cardboard Hanging Lamp Instruction Manual
- June 16, 2024
- Maeve
Table of Contents
Maeve LXL124552 Cardboard Hanging Lamp
Product Information
Specifications
- Model: LXL124552
Product Usage Instructions
Installation Instructions
Before installing the product, please read the instructions carefully and save the manual for future reference.
- Warning: Ensure that the main power source is turned off before installing the product.
- Assemble the lamp according to the instructions in the drawing.
- Connect the lamp to the mains supply with the terminal block.
- Make sure that the cables are connected securely to the terminals on the device.
- When the installation is complete, activate the power source and test the function.
Frequently Asked Questions
Q: What should I do if the lamp doesn’t turn on after installation?
A: If the lamp does not turn on after installation, please check the following:
- Ensure that the main power source is turned on.
- Make sure the cables are securely connected to the terminals on the device.
- Verify that the bulb is properly installed and functional.
- If the issue persists, please contact customer support for further assistance.
Q: Can I use this product outdoors?
A: This product is designed for indoor use only. Using it outdoors may result in damage or malfunction.
Installation instructions
Read the instructions carefully before installing the product. Save the instructions manual for future reference.
-
Installation only by persons with electro technical knowledge and experience.
-
Not suitable for installation at locations near the sea or in other environments with a corrosive atmosphere.
-
In case the product is made for indoor use, it should be used in a dry and clean environment only (IP20). Do not install or use the product outdoors. The product should not come in contact with water, damp or other fluids.
-
The light source can get hot. Pull out the plug and let the light source cool down
before replacing it. -
Only use a dry cloth for cleaning the product.
- Warning: ensure that the main power source is turned off before installing the product.
- Assemble the lamp according to the instructions in the drawing.
- Connect the lamp to the mains supply with the terminal block.
- Make sure that the cables are connected securely to the terminals on the device.
- When the installation is complete, activate the power source and test the function.
Safety guidelines
Notes on disposal
The product is designated for separate collection at an appropriate collection
point
Do not dispose of the product with household waste. For more information,
contact the retailer or the local authority responsible A for waste management
Care
Before cleaning the unit, disconnect it from the power outlet, if necessary. Do not use aggressive cleaning agents.
Warranty
The unit has been carefully checked for detects. It nevertheless you do have
cause for complaint, please go back to the retailer where you have bought the
product together with your proof of purchase.
Safety
General advices
- Read the manual carefully before use. Keep the manual for future reference.
- Only use the product for its intended purposes. Do not use the product for other purposes than described in the manual other purposes than described in the manual.
- Do not use this product if any part is damaged or defective. If the product is damaged or defective, replace the product immediately.
- Do not modify the product in any way.
- Do not expose the product to water or moisture (IP20
- Do not immerse the product into water (IP44 – IP66).
- Keep the product away from heat sources.
- Do not block the ventilation openings.
- Do not look directly into the light source of the LED lamp.
- Keep a minimum distance of >2 metres between the lamp and the surtace being illuminated.
Electrical safety
- To reduce risk of electrical shock, this product should only be opened by an authorized technician when service is required.
- Do not use the product if the cable or plug is damaged or defective. When damaged or defective, it must be replaced by the manufacturer or an authorized repair agent.
- Before use, always make sure that the voltage is the same as the voltage on the rating plate of the device.
Warning
- The light source contained in this luminaire shall only be replaced by the manufacturer or his service agent or a similar qualified agent.
- Caution, risk of electric shock.
- The external exile come or cora of this mini cannot be replaced destroyed.
- This product is not a toy – please keep it inaccessible for children.
Disclaimer
We reserve the right to make technical modifications without notice. We are
not liable for damage arising from incorrect handling, improper use or wear or
tear.
Documentation
The product has been manufactured and supplied in compliance with all relevant
regulations and directives, valid for all member states of the European Union.
The product complies with all applicable specifications and regulations in the
country of sales.
The declaration of conformity is available upon request.
CE declaration
This product complies with the following directives:
LVD: 2014/35/EU (Not applicable for solar products)
EMC: 2014/30/EU
RoHS: 2011/65/EU
Additionally, for products with Radio transmitter units:
RED: 2014/53/EU
Copyfish
OCR Result(Auto-Detect)
N/A
Translated(English)
N/A
Redo OCR Recapture Re-Translate Copy to clipboard
Please select text to grab.