dyson Airblade Wash Dry Hand Dryer Cleaning Instructions
- June 4, 2024
- dyson
Table of Contents
wash+dry
Cleaning guide
To always get the best performance from the Dyson Airblade Wash+Dry hand dryer, it’s important to regularly clean it and check for blockages.
Clean the sensors
Wipe sensors using a soft cloth and non-abrasive cleaner then place a cleaning cap over sensors to prevent activation.
Clean the machine
Clean all tap surfaces, sink, mirror, and any walls or counter tops.
When complete REMEMBER to remove the cleaning cap.
Clean and check for blockages
REGULARLY clean air inlets on the base of the motor bucket (under the sink).
Ensure the plughole in the sink is free from blockages so water can drain
freely.
What to use to clean the Dyson Airblade Wash+Dry hand dryer
Important: Do not pressure wash the Dyson Airblade Wash+Dry hand dryer.
| Types of cleaning | How to clean | Do not use |
|---|---|---|
| Routine cleaning of light soiling and fingerprints. | A mild detergent is |
applied with a lint-free cloth to remove detergent residue with a damp cloth
and tap water.| Solvent/oil-based mixes
Alkali-bleach mixes
Stubborn marks and stains, oil and grease marks.| A mild detergent, alcohol or
Quaternary ammonium solution, diluted to the manufacturer’s guidelines. Remove
detergent residue with a damp cloth.| Foaming ingredients
Watermarks.| Water marks can be avoided by drying with a dry lint-free cloth.|
Bleach or abrasive cleaners
For further information about Water supply cleanliness and bacteria growth, please refer to the Owner’s manual.
info@swish.ca
swish.ca
Servicing and support
For more information:866-236-3884
commercial.sales@dyson.com
www.dysoncanada.ca
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>