Cavdle CMEP02 Espresso Machine User Manual

June 16, 2024
Cavdle

Cavdle-LOGO

Cavdle CMEP02 Espresso Machine

User Manual MODEL

СМЕР02  Espresso Machine

Life-time Customer Support Services Please send us videos/photos if you have any questions.

SAFETY INSTRUCTIONS

  1. Please read this manual and follow the directions before using the Cavdle Espresso Machine for the first time.
  2. Before using, make sure that the voltage of wall outlet corresponds to coffee maker rating plate. Use original accessories only.
  3. This coffee maker can be used by physically/mentally disabled people or people who are lack of experience and knowledge about the coffee maker if they are under close supervision and instruction by persons who take responsibility for their safety and when they are aware of possible risks and dangers.
  4. Children should be used under supervision. Do not allow to be used as a toy.
  5. Keep the Cavdle espresso machine out of direct sunlight and away from any appliances which produce heat like ovens and hotplates.
  6. This coffee maker is for household coffee making only and can be stopped by pressing the ON/OFF button anytime during its operation. Unplug the coffee maker when not in use.
  7. The coffee maker must be placed on a flat surface. Do not move the coffee maker or turn off the power while it is working. Do not move the coffee maker when there is still water in the water tank.
  8. Before using the coffee maker for the first time, operate it twice with clean water to remove the odor.
  9. Do not damage the cord or put the power cord and the plug into water or any other liquids; do not wash the coffee maker or power cord in water or other liquids.
  10. Do not use the coffee maker in high temperature, high magnetic field and damp environment; do not use it when the plug is damaged or when the coffee maker is out of order.
  11. For effective operation, it is recommended to descale the coffee maker every 2-3 months.

KNOW YOUR COFFEE MAKER

Cavdle-CMEP02-Espresso-Machine-IMAGE-2

First Use Preparation or Not in Use for a Long Period

Before you use it for the very first time, clean the coffee maker twice based on the guidelines below.

  1. Pour water into the water tank and do not exceed the “Max” mark in the tank.
  2. Put the filter into the funnel, tighten and align it with the mark (see below pictures).Cavdle-CMEP02-Espresso-Machine-IMAGE-3
  3. Plug in the power, press the       button, the coffee maker beeps.    and  button lights flashing together indicates the coffee maker starts to warm up (Make sure that the steam knob points to  . If it points to   , the four lights will flash together and the machine will not work.).
  4. Turn the steam knob to    for the steam nozzle to discharge hot water. Then turn the steam knob back to 
  5.  When the indicator lights of  and  are always on, press the button of  to wash the coffee filter or coffee cup with hot water.

Espresso Coffee Making

  1. Insert filter to the funnel, load ground coffee powder into the filter and compress it with the rear of the coffee spoon; meanwhile, clean the coffee powder at the edge of the funnel.
    Note: When inserting the filter, please first align the small groove and then slightly rotate the filter to prevent it from falling. When removing the filter, please turn the filter back to the small groove position.Cavdle-
CMEP02-Espresso-Machine-IMAGE-10

  2. Insert the funnel and lock it tightly as shown by the indication sign, then place a cup under the funnel.Cavdle-CMEP02-Espresso-Machine-IMAGE-11

  3. When the  and    lights are on, press the    button or  button to discharge corresponding amount of coffee.

  4. Wait for the coffee to drip into the cup, it’s done!

Steam Milk Foam Function
  1. Press button
  2. Insert the steam nozzle.
  3. Spin the steam knob to
  4. When done, twist the steam knob to  and press  Cavdle-CMEP02-Espresso-Machine-IMAGE-12

Hot Water Function

Press the  button, turn the “steam knob” to ” pipe will start to discharge hot water; Turn the “steam knob” to  ” to stop the hot water.
Note: it is normal for the machine to make relatively large vibration sound during the process of discharging hot water.

How to Make the Perfect Latte

  1. Prep Milk Jug
  2. .Before Texturing Milk
  3. Fill Jug with cold milk just below the bottom of the spout
  4. Press  the  button until the  button stops flashing.
  5. Spin the steam knob to  and hold it for 3 secs to drain the remaining water in the pipe.
  6. Spin the steam knob to Cavdle-CMEP02-Espresso-Machine-IMAGE-13
  7. Position Steam Wand
  8. Start Texturing Milk
  9. Insert Steam Wand Arm at 12 o’clock. Tip at 3 o’clock. Keep Finger Width from edge and the steam vent is just a little below the surface of the milk
  10. Spin the steam knob to  to start texturing milk. Texturing Quakes a smooth hissing noise. Milk is moving in a whirlpool action.Cavdle-CMEP02-Espresso-Machine-IMAGE-14
  11. Milk Texturing
  12. As milk level rises, lower Jug to keep Tip just below surface.
  13. When desired microfoam achieved, immerse Steam Wand half way
  14. Milk ready when Milk Jug base is too hot to touch for 3 sec
  15. Spin the steam knob to 
  16. Remove Jug from Steam Wand.Cavdle-CMEP02-Espresso-Machine-IMAGE-15
  17. Purge Clean Steam Wand
  18. Spin the steam knob to on for 3 secs and then turns the steam knob to .
  19. Remove the stainless steel foaming nozzle Wipe the milk dirt at the steam port with a cloth.
    IMPORTANT AND BASIC: Clean the foam nozzle  immediately after  making steamed  milk foam.Cavdle-CMEP02-Espresso-Machine-
IMAGE-16

Memorized Coffee Making Function

  1. When all the indicator lights are on, press and hold the  button for 3 seconds to enter the flow setting function, the light for single-cup coffee is always on, press it again and the funnel starts to pour coffee. When the desired amount is reached, release the  button, you will hear a sound from the coffee maker. That means the time has been memorized.
    Note: The single-cup flow rate setting limit is at least 30ml and at most 70ml.

  2. two-cup button memorized coffee making function setting can be operated the same as above. The minimum flow setting limit of the double cup is 80ml and the maximum is 120ml.

  3. Hold and press together   for 3 seconds. All the button will keep light fixed, the machine will back to ready mode. The machine is restored to the default setting.

Descaling Reminder Function

  1. After 500 cups of coffee, the coffee maker will warn for descaling.
  2. When the coffee maker is turned on, the control panel lights (all 4 buttons) will flash 5 times and the coffee maker will beep for 5 times. This warning reminder shall happen each time the coffee maker is turned on until the reminder is cancelled.
  3. Fill the water tank with water and descaler to the MAX level (The scale of water and descaler is 4:1, the detail refers to the instruction of descaler. Please use “household descaler”).
  4. Press the  button to turn on the coffee machine. Press  button to allow water to flow into the drip tray. Then turn off the appliance and leave the descaling solution in the appliance for 5 minutes.
  5. After five minutes, press the   button and repeat the Step 4 for  3 times.
  6. Fill the water tank with water(No need to put in descaler). Press the  button and repeat the Step 4 for 3 times.
  7. To cancel the descaling reminder after cleaning, please press   and      at the same time for 3 seconds to cancel the flashing light.

Cavdle-CMEP02-Espresso-Machine-IMAGE-17

  1.  All 4 buttons Flash 5 times and the coffee maker beeps for 5 times.
  2. . Fill the water tank with water and descaler to the MAX level.
  3. . Press the  button to start to  heat the water
  4. Press the  button and hot water flows into the drip tray.Cavdle-CMEP02-Espresso-Machine-IMAGE-18
  5. Press the  button to shut down and leave the descaling solution in the water pipe for 5 minutes
  6.  After five minutes, press the ” ” button to start the machine and repeat the Step 3 and the Step 4 for 3 times
  7. . Fill the water tank with water (No need to put in descaler).
  8. Press the  button and repeat the Step 4 for 3 times
  9. Press the button. Press    and  button at the same time for 3 seconds to cancel the flashing light.

Cooling Function

When the coffee maker is operating in a high temperature please make sure that the steam knob is turned to . And when the indicator lights for and buttons flash quickly, which means that the coffee maker need to be cooled. At this time, rotate the “steam knob , and the steam pipe starts to continuously discharge water and cool down. Once the and  indicator lights stop flashing quickly, turn the steam knob to  and the machine will stop cooling down. You can start making coffee when the power indicator is on.Cavdle-CMEP02
-Espresso-Machine-IMAGE-20

Cleaning and Maintenance

  1. Unplug the power cord and make sure the coffee maker completely cools down before cleaning it.
  2. Wipe the exterior parts of the coffee maker with a damp cloth or a clean sponge.
  3. Please clean the gadgets when they are taken off from the coffee maker.
  4. Clean the water tank once a week with mixture of soap and cleanser.
  5. Do not use alcohol or solvent cleaner, do not clean the coffee maker while it is in the water.
  6. Do not use the steam function to clean the coffee maker.
  7. Do not scrub the coffee maker with a metal brush.
  8. Unscrew the coffee funnel and clean the coffee grounds in the filter.
  9. Clean the frothing nozzle each time after using it:
    • Make sure there is water in the water tank. The water should not exceed the maximum level of the water tank.
    •  Put a cup (with water) underneath the frothing nozzle and immerse the frothing nozzle in the cup.
    • C. Press  ” and turn the steam knob to  for 3-5 seconds.
    • D. Remove the cup.
    • E. Wipe it and let it dry.Cavdle-CMEP02-Espresso-Machine-IMAGE-21

Troubleshooting

Problem Reason Method
No water/steam
  1. There is no water in the water tank.
  2. The coffee maker is not preheated.
  3. Steam pipe has clot.
  4. Steam button and/or steam knob are not on or the preheating is not completed

|

  1. Fill the tank with water and press the ON/OFF button and the button.
  2. The coffee maker needs to be preheated before the coffee can be produced. That is, the coffee maker will turn to normal light from the flickering state.
  3. Use a small wire to poke around the steam hole.
  4. Turn on the steam button and/or steam knob and wait for the preheating to complete before steam comes out.

No grease

|

  1. The coffee grounds are too thick or the grounds are not pressed.
  2. Coffee beans are not fresh enough.

|

  1. Change to a finer ground coffee and use the back of the coffee scoop to flatten it horizontally.
  2. Use fresh coffee beans/ground.

---|---|---
The milk does not foam well|

  1. Whether it is whole milk.
  2. The steam is discharged too early.

|

  1. Use whole milk.
  2. Steam nozzle can only be started after the indicator light for steam button turns from flashing to constant light.
  3. Please see “How to Make the Perfect Latte” section.

No coffee, coffee light flash| The temperature is too high after steaming.| Please see “Cooling Function” section.
Water scale| The coffee maker has been used for fairly long time.| Purified water is recommended. If the water quality in your area is poor, please perform a descaling operation every 2 months. Please see “Descaling Reminder Function” section.
Coffee not hot enough|

  1. The coffee ground is too fine and too much, resulting in too little water output.
  2. Ambient temperature or cup temperature is too low.

|

  1. Adjust the grinding degree of freshly coffee ground.
  2. Flush the filter and coffee cup with hot water.

Cavdle-CMEP02-Espresso-Machine-IMAGE-23

Warranty

For the latest warranty service, please refer to the official website QR code:

For product quality problems

We provide 1-year limited quality warranty for all Cavdle Espresso Machine.
The customer shall first bear the freight to send the product back to the local warehouse of Cavdle, and our after-sale department will judge whether it is the product quality  problem or the damage caused by improper operation.

  1. For product quality problem confirmed by our after-sale department, Cavdle will repair it for free and send it back.
  2. For product damage caused by abnormal operation of the customer, Cavdle will charge the maintenance fee according to the actual maintenance fee and send it back to the customer after the maintenance is completed.

For all questions, please attach photos or videos to describe the problem and send them to support@cavdlelife.com

Disclaimer
Cavdle cannot provide you with a free one-year warranty if

  1. Misunderstand and misuse of the manual.
  2. Use this product for purposes other than coffee-making.
  3. Modifying the coffee maker by consumers instead of technicians from authorized retailers or Cavdle.
  4. Usage of non-original gadgets

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals