LEM 1261 Spring Loaded Burger Press User Manual
- June 10, 2024
- LEM
Table of Contents
SPRING
LOADED
BURGER PRESS
USE & MAINTENANCE
1261
1 YEAR WARRANTY
GENERAL WARNINGS AND SAFETY INFORMATION
IT IS IMPORTANT TO READ AND UNDERSTAND ALL OF THE INSTRUCTIONS AND SAFEGUARDS PRIOR TO USE
- Always ensure that the appliance is properly assembled and safely set up before use.
- CAUTION: This appliance is not recommended for use near or by children or persons with certain disabilities. Set up and store the appliance out of reach of children. When not in use, store device in a secure and dry place out of reach of children.
- The appliance is designed for domestic use and not for commercial purposes.
- DO NOT use the appliance on bones, deep frozen food, hard items or non-food items.
- Use the appliance with the supplied accessories only. WARNING: The use of attachments not recommended or sold by the manufacturer may cause injury, damage to personal property, and may void your warranty.
- WARNING: Do not use while under the influence of alcohol or drugs (prescription or non-prescription) as these may impair user’s ability to properly assemble or safely operate the appliance.
- The manufacturer declines any responsibility in the case of improper use of this product. Improper use of this product voids the warranty.
- Tie back loose hair and clothing. Remove neckties, rings, watches, bracelets or other jewelry before operating the appliance.
- SAVE THESE INSTRUCTIONS
BEFORE USE
Follow these 4 simple steps to clean your LEM Burger Press:
- Unscrew the top knob and remove the spring.
- Press plate will then be released for easy cleaning.
- Wash all parts in warm, soapy water. Rinse and hand dry.
- Reassemble the burger press.
DIRECTIONS FOR MAKING PATTIES
Adjust the patty thickness:
- Open the top of the burger press to see the press plate and view the patty thickness currently set.
- Loosen the locking wing nut, and then turn the press plate in or out until the desired thickness is reached.
- Tighten the locking wing nut finger tight.
Form and make patties:
- Use with LEM Freezer Sheets to keep your fresh patties from sticking together.
- Place one half of the freezer sheet over base of burger press.
- Place enough ground meat on the base plate to make the desired thickness of the patty.
- Fold other half of freezer sheet over meat.
- Close the top of the burger press and press the knob to pack the burger tightly.
- Remove the excess meat from the outside of the burger press.
- Lift the top of the burger press. If the patty sticks in the top of the press, simply press the top knob to use the press plate to release the patty.
PARTS
- Patty thickness
- Top
- Adjustment screw
- Top knob
- Spring
- Locking wing nut
- Adjustment plate
- Base plate
- Anti-slip feet
NOTE: LEM Freezer Sheets are available from the dealer where you purchased your LEM Burger Press, or from LEM Products at:www.lemproducts.com
IMPORTANT WARRANTY INFORMATION PLEASE READ
FILL OUT AND RETURN ENCLOSED WARRANTY CARD
THIS WARRANTY COVERS:
LEM® Spring Loaded Burger Press #1261
THE WARRANTY IS EXTENDED TO THE ORIGINAL PURCHASER ONLY
WARRANTY DURATION : This product is warranted to the original purchaser for a period of one (1) year from the original purchase date. EACH UNIT COMES WITH A WARRANTY CARD, WHICH MUST BE FILLED OUT COMPLETELY AND RETURNED IMMEDIATELY, WITH A COPY OF THE PURCHASING RECEIPT. FAILURE TO RETURN YOUR WARRANTY CARD WILL LIMIT WARRANTY TO 90 DAYS WITH PROOF OF PURCHASE.
WARRANTY COVERAGE: This product is warranted against defective materials or workmanship. The warranty is void if the product has been damaged by accident, misuse, neglect, modification or improper service or repairs by unauthorized personnel. It is also void if damaged in shipment or by other causes not arising out of defects in the materials or workmanship. This warranty does not extend to any units which have been in violation of written instructions furnished. This warranty covers only the product and its specific parts, not food or other products processed in it.
WARRANTY DISCLAIMERS: This warranty is in lieu of all warranties expressed or implied, and no representative or person is authorized to assume any other liability in connection with the sale of our products. There shall be no claims for defects or failure of performance under any theory of sort, contract or commercial law including, but not limited to negligence, gross negligence, strict liability or breach of contract. The manufacturer declines all responsibility for damage to persons, things or animals arising from the failure to comply with the norms contained in this manual. The manufacturer reserves the right to make modifications at anytime to the models while maintaining the main characteristics described herein. The manufacturer also declines all responsibility for any errors in compiling this manual.
WARRANTY PERFORMANCE: During the warranty period, a product with a defect will either be repaired or replaced after the product has been inspected by an LEM Service Technician. LEM RESERVES THE RIGHT TO REFUSE WARRANTY PERFORMANCE OR PRODUCT EVALUATION UNLESS THE ORIGINAL SALES RECEIPT OR THE WARRANTY CARD IS ON FILE. The repaired product will be in warranty for the balance of the warranty period. No charge will be made for such repair or replacement.
IMPORTANT NOTICE: If any parts are missing or defective, please contact our Customer Service Department for assistance at 877-536-7763 (M-F 8:30am to 4:30pm EST). DO NOT RETURN TO THE STORE WHERE THE PRODUCT WAS PURCHASED. LEM Products is not responsible for, or will not cover under warranty, missing or damaged parts on discounted/clearance, resale or final sale items where the seller may not be able to guarantee full functionality or completeness of the unit.
LEM PRODUCTS MERCHANDISE RETURN POLICY WARRANTY SERVICE: To obtain service under terms of this warranty, please contact us at 877-536-7763 to obtain authorization prior to returning the merchandise. No merchandise will be accepted without prior authorization. Prior to returning the product for warranty repair the product must be thoroughly cleaned and free from any food particles or other debris. Failure of the purchaser to comply with this standard may result in the unit being returned without repair. In some cases, a $50 cleaning surcharge may apply. Please return the product prepaid in the original packaging if possible, enclose a copy of your receipt, (keep a copy of your proof-of-purchase for your records) and include a written explanation of the issue. Ship to LEM Products, 4440 Muhlhauser Road, Suite 300, West Chester, OH 45011. LEM Products is not responsible for damage incurred in shipping, make certain to pack product properly. Return shipping charges are the responsibility of the purchaser. Packages returned to LEM should be insured for the value of the product to cover any damages that may occur during shipping.
Revised July 20, 2018
LEM Products • West Chester, OH 45011 •877-536-7763 • lemproducts.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>