Govee H608C String Downlights User Manual

User Manual
Model: H608C
Govee String Downlights

Safety Instructions

Read and follow the safety instructions below:

• Do not allow children to install and use this product alone.
• The product is not waterproof. Do not expose it o areas susceptible to water splashes or water drops.
• The internal light sources cannot be replaced. Ifit breaks, the product should be replaced.
• Avoid installing the device near potentially dangerous sources or heat sources (e.g, candies, liquic-flled objects.)
• ‘The working temperature should be between 14 to 104°F (1010 40°C),
• Store the product in places where the temperature is within ~410 140°F (20 0 60°C) if you do not plan to use it for a long time,
• Avoid using other non-standard adapters for this product,

Introduction

Thanks for choosing the Govee String Downlights. Each lamp bead has an individual lens, allowing the light to achieve a large wall washing area. It s suitable for decorating walls of bedrooms and living rooms. You can remotely control it via Govee Home App. You can also experience lights dancing to the music with music modes. Enjoy your new lighting!

What You Get

At a Glance

a.Light
b. Mic
c. Control Box
d. Adapter

• Press totur on or off.
• Press and hold for 10 secondstoreset.

Pairing Your Light with Govee Home App
What You Need

• AWFi router supporting the 2.4GHz and 802.11b/g/n bands.
  5GHz s not supported.

1.  Download Govee Home App from the App Store (10S) or Google Play (Android). Log in with your account (new users need to create an account)
2. Turn on the Bluetooth on your smartphone.
3. Open the app, tap the “+” ican in the top right corner and search for “H608C”.
4. Tap the device icon and follow the on-screen instructions to complete pairing.

Controlling the Light with Your Voice

1. Open the app, then tap the device icon to enter the details page.
2. Tap the settings icon in the top right corner.
3. select “User Guide” and follow the on-screen instructions to control the device using your voice.

Specifications

Troubleshooting

1. Cannot connect to Govee Home App.
   a. Check if the light has been powered on.
   b. Checkif your smartphone’s Bluetooth has been turned on or try connecting the light to another smartphone.
   c. Ensure that your smartphone is near the light when connecting for the first time.
   d.Ifthe problem persists, go to the “My Devices” page to delete the device and follow the previous instructions to reconnect.

2. Cannot connect to Wi-Fi.
   a. Checkif the light has been powered on.
   b..Do not skip connecting to Wi-Fi during the pairing process.
   c. Ensure that your Wi-Firouter is 2.4GHz capable (SGHz is not supported)
   d. Ensure that you entered the correct WiFi password during. the Wi-Fi connection process,
   e . Shorten the distance between the device and the Wi-Fi outer to less than SOft then try reconnecting.
   f. Use another smartphone to pair with the device to check your Wi-Fi network is working.

3. Cannot pair or connect with Alexa or Google Assistant.
   a. Ensure that the WI-Fi connection is stable.
   b.Gotothe app’s Settings page and follow the instructions under “User Guide” to pair the light again.

4. The light does not fully display the selected color/some LED beads do not light up.
   a. Please contact the Govee support team for rapid product replacement.

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada licence-exempt RSS standard(s). Operation s subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) This device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modififications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and receiver.
3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
4.  Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement

This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimurm distance 20cm between the radiator & your body.
“This Class B digital apparatus complies with Canadian ICES-005.
The trademark Govee has been authorised to Shenzhen Qianyan Technology LTD.
Copyright ©2021 Shenzhen Qianyan Technology LTD.
Al Rights Reserved.

Responsible party :
Name: GOVEE MOMENTS(US) TRADING LIMITED
Address: 2501 Chatham Rd Suite R Springfield IL 62704
Email:certification@govee.com
Contact information: https://www.govee.com/support

Customer Service
  Warranty: 36-Month Limited Warranty
  support: Lifetime Technical Support
Email: support@govee.com
official Website: www.govee.com
ecovee @ govee official govee.official
@ Goveeoficial @Govee smarthome

For FAQs and more information,
Please visit: WWW.govee.com

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>