FAB GLASS 89889 Mirror with Safety Backing Installation Guide
- June 16, 2024
- FAB GLASS
Table of Contents
FAB GLASS 89889 Mirror with Safety Backing
Product Information
The product is a mirror hanging system designed to securely mount a mirror on a wall. It includes a j-bar and necessary hardware for installation. The j-bar can be cut to fit the width of the mirror when hanging it vertically. The system is suitable for gym mirrors or any other mirrors that require secure mounting.
Specifications
- Product Type: Mirror Hanging System
- Compatibility: Suitable for gym mirrors and other mirrors
- Included Components: J-bar, hardware
Product Usage Instructions
1. Selecting the Installation Location
When choosing the location to install the mirror, avoid places with excessive vibration as this can affect the stability of the mirror. Additionally, avoid freshly painted walls that have not been sealed yet, as this may cause damage to the paint.
2. Marking the Line
Before hanging the mirror, it is recommended to have someone else hold the mirror or assist in marking the line on the wall. This will ensure accurate placement and prevent any accidents during installation.
3. Hanging the Mirror Vertically
If you plan to hang the mirror vertically, follow these steps:
- Cut the j-bar according to the width of the mirror.
- Position the j-bar horizontally on the wall at the desired height.
- Securely attach the j-bar to the wall using the provided hardware.
- Place the mirror on the j-bar, ensuring it is properly aligned and centered.
- Securely fix the mirror onto the j-bar using the appropriate fasteners.
Frequently Asked Questions (FAQ)
Q: Can I use this mirror hanging system for any type of mirror?
A: Yes, this mirror hanging system is suitable for gym mirrors and other types of mirrors that require secure mounting.
Q: Do I need any additional tools for installation?
A: No, the necessary hardware for installation is included with the product. However, you may need basic tools such as a drill and screwdriver.
Q: How should I clean the mirror?
A: If you are inexperienced in cleaning mirrors, it is important to be cautious. Use a soft, lint-free cloth and a mild glass cleaner to gently wipe the surface of the mirror. Avoid using harsh chemicals or abrasive materials that may damage the mirror.
Thank you
Congratulations on the purchase of your new gym mirror! We’ve made it very easy to install. Please read the following instructions carefully before you begin to install the gym mirror. Using any other methods to install the mirror may lead to it breaking and will invalidate the warranty.
About Your Safety Backing Mirror
This mirror was designed with safety in mind. It is laminated on the back with a layer of woven tape. In case of broken glass, the tape’s adhesive layer will hold the shards in place, minimizing the potential of injury.
Mirror Handling Cautions
Please read every step in the instructions before you begin installation. You are responsible for assembling, installing and taking care of your mirror according to the instructions. Users who fail to heed the instructions run the risk of injury, so please be careful and work with caution. When applying the mirror glue, work in a well ventilated area to avoid breathing in fumes.
REQUIRED AND RECOMMENDED TOOLS ****
HARDWARE INCLUDED PER YOUR ORDER
- Remove packaging from your gym mirror.
- Place the piece of cardboard against the mirror at the wall toprotect it during installation. Place the styrofoam sheet on the floor for additional protection as you install your gym mirror.
- Clean the wall where you will be installing the mirror. Failure to do so may prevent the glue from curing properly and staying fastened in place.
- Determine where you want to place the mirror and then use a tape measure and pencil to draw a straight line from the floor for mirror positioning.
- Hold the JBar in place on the wall justabove the marks you just made.Use a level while you make four marks in a line with a pencil to show where to match them up with the holes in the JBar bottom support.
- Drill four holes in the in the wall at the wall marks. Insert each of the 4 EZ anchors into the holes.
- Move the JBar to line up its 4 holes with the 4 EZ anchors and hold it securely in place. Place four screws through the holes and drive them in.
- Pick up the mirror and slowly maneuver it into place inside the JBar.
- If you can hang a gym mirror vertically,
- You need to cut the j-bar according to the width of the mirror when hanging it vertically so that the mirror can be fixed on the j-bar appropriately.
- Position the round mirror clips and then draw two pencil marks, tracing each of the two mirror clips at the top of the mirror.
- Slowly and cautiously pull the mirror from the JBar, lifting and then pulling it outward toward you.
- Drill holes in the pencil marks you made at the top of the mirror.
- Insert plastic anchors into these two holes.
- Spread mirror glue to create an area measuring ¾-inch by 2/3-inch on the back of the mirror.
- Carefully angle the mirror as you insert it into the JBar.
- Screw the mirror clips into the two anchors you placed on the wall.
- Fix the caps on the mirror clips.
Congratulations! You have finished installing vour new Gvm Mirror.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>