Brightup HL-3030 High Speed Hair Dryer Styler User Manual
- June 16, 2024
- Brightup
Table of Contents
Brightup HL-3030 High Speed Hair Dryer Styler
Specification
- Model No: HL-3030
- Rated Frequency: 50/60Hz
- Power: 1200W (100-120V)
- 1400W (220-240V)
Thanks for buying our product!
In order to use this product correctly, please read this instruction before
use, and please keep this instruction carefully.
Parts Description
- A Attachment lock
- B Heat setting switch
- C On/off & Speed switch
- D LED lamp
- E End cap
- F Power cord
- G Volumizer( 60mm)
- H Detangle brush
- I Left curling iron(32mm)
- J Right curling iron(32mm)
- K Hair dryer
How to change the accessories
Installation
- Rotate the clasp to the far right Align ” ” and” ” and insert
- Rotate the clasp to the far left again so that “ ” and ” ” correspond and lock
Disassembly
- Rotate the clasp to the far right so that ” ” and “ ” correspond and unlock
- Pull the brush head upward
Operating instructions
- Plug in the plug, LED indication lamp will lights up.
- Slide the “ ” switch to turn On/off and select wind speeds.
- Slide the “ “switch to select Cool-warm-hot settings.
Insert Fragrant ring and inlet mesh cleaning
- Warning: can only be performed when the device is unplug.
- Rotate towards left side to release the end cap.
- Insert the fragrant ring on the groove.
- Do regular cleaning for inlet mesh by small bristle brush.
- Rotate towards right side to lock the end cap.
Consult your styling guide to begin discovering fresh looks with your additional accessories.
- Start styling with hair that is 80%-90% dry, Choose the appropriate barrel to determine the direction of the curls.
- Pro Tip: Apply hair products or styling agents according to your preference.
- Divide your hair into upper and lower sections.
- Grasp a 1/2-1 inch section of hair, leaving 4 inches at the ends free, ensuring they hang loosely.
- Pro Tip: Achieve the best outcome by choosing a section of hair with uniform length.
- Switch on the styling wand positioned behind the hair ends, allowing them to automatically wrap around the middle of the barrel.
- When the ends have wrapped around, release the hair section and slowly position the barrel near the roots, allowing the hair to effortlessly wrap around itself. Avoid twisting the wand.
- To achieve the best curls while safeguarding your hair from heat damage, hold the barrel in position for 10 seconds, followed by a 10-second press of the cool “ ” setting button. Repeat this process until your hair is dry to ensure ideal results. Lastly, switch off the styling wand and gently pull the barrel straight down to unveil your gorgeous curls!
- Pro Tip: Once the hair is removed from the barrel, use a setting or holding spray as desired for an even longer-lasting look.
Additional Styling Tips
- Take smaller sections if your hair is having difficulty wrapping around the barrel.
- Use sectioning clips to prevent unwanted hair from being wrapped around the barrel.
- Test different moisture levels to understand the level of moisture that works best for your hair type.
- For curly or oily hair, prep your hair for curling by lengthening it using the paddle brush.
IMPORTANT SAFETY INSTRUCTIONS
When using electrical appliances, especially when children are present, basic safety precautions should always be followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING
KEEP AWAY FROM WATER
DANGER: As with most electrical appliances, electrical parts are electrically live even when the switch is off.
To reduce the risk of death by electric shock: Always “unplug it”immediately after using. Do not use while bathing. Do not place or store appliance where it can fall or be pulled into a tub or sink. If an appliance falls into water, “unplug it”immediately.
WARNING: To reduce the risk of burns, electrocution, fire, or injury to persons:
- An appliance should never be left unattended when plugged in.
- Close supervision is necessary when this appliance is used by, on, or near children or individuals with certain disabilities.
- Use this appliance only for its intended use as described in this manual.
- Do not use attachments not recommended by the manufacturer.
- Never operate this appliance if it has a damaged cord or plug, if it is not working properly, or if it has been dropped, damaged, or dropped into water.
- Keep the cord away from heated surfaces.
- Do not wrap the cord around the appliance.
- Never use while sleeping.
- Do not use an extension cord with this appliance.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>