Brightup FK-8688T ( UW0584A ) Beard Trimmer Instruction Manual

Brightup FK-8688T ( UW0584A ) Beard Trimmer

Brightup’s All-in-One Multi-Functional Grooming Kit is a professional precision shaving system design that includes 6 trimmer heads and a stand base for easy collection and organization. Comes with 5 hair trimmer combs for precisely controlling hair length and styling your beard, hair, body, private, moustache, nose, ear, facial, and groyne to achieve any desired look. For easy cleaning, the entire body is washable. Detachable blades are also simple to clean with the included brush. Allow it to dry naturally for the best results. The LED display shows battery power and reminds you to charge it. The built-in rechargeable Lithium-ion battery provides up to 90 minutes of run time per charge after only 1.5 hours of charging time. High performance is possible anywhere. The cordless hair clippers are simple to use.

The stainless steel moving and standing blades have a precision gap, are close to the skin, allow for more pruning, and produce low-friction heat. The blades will not rust and will not cause skin irritation. The curved smooth handle is more comfortable to hold. Long press for 3 seconds to lock the design, which makes it easier to use. 7300 RPM is suitable for daily use, while 8800 RPM can cut thicker hair more easily, and there are two speed modes for your convenience. When the trimmer is running, the high-quality motor will not make excessive noise, allowing you to enjoy the fun of trimming in a low-noise environment. This men’s grooming kit is the ideal present for any man, father, husband, boyfriend, or son.

We aim to provide you with cost-effective products and services. This product is specially designed for families, and it can be used to trim children’s hair as well as adult’s.  But please do not use it to cut artificial hair or otherwise.

Thank you for purchasing our product. We hope you enjoy your new appliance!

Please read the manual carefully to familiarize yourself with your new appliance before using it, and save these instructions for further reference.

PRECAUTIONS

Please use this appliance only for the intended purposes described in this manual.

DESCRIPTION

1. Full-size trimmer
2. On/ Off switch
3. Intelligent digital display screen
4. Design trimmer
5. Precision trimmer
6. Nose/ ear trimmer
7. Micro shaver
8. Body trimmer
9. Comb
10. Five guide combs (a toe)
11. Stand base
12. Lubricating oil
13. Cleaning brush
14. USB cable (for 5A 1A charger)

SPECIFICATIONS

• PRODUCT MULTI GROOMING KIT BEARD KIMMER Model: FK- 8688T
• BATTERY TYPE Lithium battery
• CHARGING TIME 5 hours
• BATTERY LIFE 90 minutes
• RATED VOLTAGE 110 – 240V
• RATED FREQUENCY 50 / 60 Hz
• RATED POWER 5W
• PRODUCTION date please see it on the appliance Standards: GB4706.1-2005 GB4706.9- 2008

GETTING STARTED

When using the clipper for the first time, please charge it for 2 hours to activate the battery. Make sure the product is turned off before charging.

Connect one end of the charging adapter to the appliance, and the other end to the USD port. The charging indicator will be on, indicating successful connection. The clipper cannot be charged for too long. If you don’t use it for a long time (2-3 months), please unplug the power cord. Please fully charge your clipper before using it.

To extend battery life, charge them at least once every six months after the battery is fully discharged.

INSTALLATION AND REMOVAL OF THE ATTACHMENTS

HOW TO USE

• When replacing an attachment, first place it in the right position with your fingers, and then align the clipper with the slot of the attachment and snap it on(Fig. 3-4).
• Please remove the cutting heads according to the illustrations (Fig. 1-2)
• Align the slots on the comb and the clipper, snap the precision trimming comb on to install it(Fig. 3,5).
• There are four guide combs with specification as follows.

Combs for full-size trimmer

Ways to match combs for the precision trimming blade

• Remove the guide comb from the back to the front as shown in Fig. 7-8.
• Press the attachment downwards to separate it from the appliance(Fig. 9).

Align the attachment with the slot on the  appliance and snap it on (Fig. 10). Align the attachment comb with the front slot and snap it on in the direction of the arrow to install the clipper guide comb(Fig. 11).

• Different guide combs can be selected according to different needs (Fig. 12). n Way to clean the appliance
• Remove the cutting heads from the appliance before cleaning them in the water as shown in the Fig. 13. And then clean the internal parts with a cleaning brush to remove dust and apply lubricant (Fig. 13-14).

WAYS TO CHARGE

• Charging through USB port is available, and it is very convenient (Fig. 15).
• Insert the plug of the charger directly into the appliance(Fig. 16).

HOW TO USE

TO TRIM HAIR (FIG. 21-22)

• Install a guide comb onto the full- size trimmer . If you are trimming for the first time, the maximum trimming length is recommended.
• Turn the clipper on.
• Place the flat top of the comb against the skin.
• Comb your hair slowly with the clipper.
• If the hair accumulates too much on the comb, remove the comb and clean it with a brush or rinse it.

TO OUTLINE BEARD / MOUSTACHE (FIG. 17-18)

• Trim beard / moustache line with a precision trimming blade.
• Gently place the blade of the trimmer against your skin and start from the edge of the beard / moustache to trim it into your desired shape slowly.

TO TRIM SIDEBURNS (FIG. 19-20)

• Hold the trimmer with the precision trimming blade facing you.
• Starting from the edge of the sideburns, gently lean the blade of the trimmer against your skin, and trim the edge of the of the sideburns to a desired position on the face .

TO USE A MICRO SHAVER (FIG. 24)

• Install the micro shaver.
• Hold the appliance with the micro shaver gently against your face at an angle of 45 degrees.
• Shave with short and controlled movements. Stretch your skin with your free hand, which makes the hair stand upright to make it easier to shave. Note: the micro shaver is designed to deal with the details surrounding the beard / sideburns.
• It’s not designed to be clean-shaven.
• For better shaving effect, it is recommended to use professional shaving tools.

NOSE OR EAR TRIMMER (FIG. 23)

• Install the nose trimmer.
• Gently insert the trimmer into the nostrils or ears.
• Gently move the trimmer in and out of the nostrils or ears, while rotating.
• Avoid inserting the blade more than 6 mm into the nostrils or ears. n Attach and remove combs from the clipper
• Avoid inserting the blade more than 6 mm into the nostrils or ears. n Attach and remove combs from the clipper
• Keep the beard, moustache and sideburns dry, while trimming them.
• Avoid using lotion before using the clipper. And comb your hair in the direction it grows.

CLEANING AND MAINTENANCE

Clean and maintain your clipper.

AFTER USE

1. Turn off the clipper.
2. Gently brush off the remaining hair. It is recommended to wash the comb and blade with warm water.

CLEANING PRECAUTIONS

• Only soft brush is used for cleaning, such as the brush provided in the package.
• It is recommended to use the lubricating oil attached in the kit or that for professional sewing machines.
• Do not clean the unit or blade with irritant or corrosive detergent.
• The clipper can be washed in water all over, but please dry the charging port before charging to avoid accidents.

STORAGE

Please put the appliance and adapter in a dry and ventilated place. And Keep the temperature under 140 ° F (60 ° C). Do not wrap the cord of the charging adapter around the appliance.

SAFETY INSTRUCTIONS

Warnings – to reduce the risks of burns, electric shock, fire or personal injury:

• When the appliance is plugged into the power socket, it must be watched out.
• Keep the plug and electrical cord away from heated surfaces.
• Make sure that the plug and cord are free from moisture.
• Do not plug or unplug the appliance with wet hands.
• Please don’t use the appliance with a broken cord. Please contact the seller to purchase a new cord.
• Please charge it, use it and keep it stored at 15-35°C.
• Remember to unplug the appliance when cleaning it.
• Only the attachments provided with the appliance should be used.

Keep the clipper out of the reach of children. People with reduced physical, sensory or mental capabilities or lack of experience are not recommended to use it. Otherwise it may lead to a dangerous situation.

ENVIRONMENTAL PROTECTION

• Please handle the battery properly when discarding the clipper. Otherwise it may cause environmental pollution.
• You can seek advice from our service center or from your local solid waste management department.

NOTE: Do not put the battery into the fire, otherwise it may burst or be damaged to release toxic substances.

Do not discard electrical appliances together with general household waste. Please send them to official recycling facilities for the sake of environmental protection (Fig.25).

BATTERY DISPOSAL

Take the battery out of the shell with scissors and disconnect the battery and the appliance by cutting the connecting wires (Fig. 26).

Batteries must be removed from the appliance before discarding.

1. Unplug the clipper from the socket to avoid the risk of electric shock.
2. Screw out the back screws with a screwdriver; pry open the shell; screw out the screws on the circuit board; find the connecting wires on the battery, and cut them.
3. Clamp the wire connecting the battery with steel wire pliers.
4. Batteries removed from the appliance should be disposed of properly as per local regulations.

Frequently Asked Questions

How to adjust the height of the footrest?

Grasp both sides and lift to EN raise. Grab the front and tilt back to EN release to lower it.

How does it work?

The footrest is attached to a spring-loaded hinge, which allows you to raise and lower it.

What is the difference between HNFR3 and HNFR2?

HNFR3 has a bigger size, more comfortable and higher quality than HNFR2.

What is the difference between HNFR3 and HNFR1?

HNFR3 has a bigger size, more comfortable and higher quality than HNFR1.

When do we get the free “gift” offered in box with these clippers?

Didn’t see a free gift offer but the clippers came with lots of options foe trimming and a compact storage unit for everything

how can I get a replacement charging cord

Talk to the supplier.

Can you shave smoothly with the grooming kit?

Yes. It almost as good as a razor.

What blade is best for private parts, so it won’t cut any skin?

maybe full-size trimmer. And yes, it won’t cut any skin.

Does it work both for every day shaving (instead of razor shaving) and full hair cut?

Yes, it does.

does it work with cell phone adapter?

Yes, 5V is okay, otherwise it will not work and will broke.

Is there a way to order replacement parts? Dropped the 3mm guard and broke the clip off

No. I don’t think so.

Does it work on 220v power?

Adapters are only support 5V, if you use other USB ports, no limit.

Does this trimmer vacuum as you are using it?

It does not.

I purchased this item earlier this year. I unfortunately misplaced the usb charger. is there anywhere I can purchase a new one?

We didn’t sell the separate charger and adapter. But we can solve your problems, please contact our after-sale support team: support@ibrightup.com. They will help you.

Video

Brightup-FK-8688T-( UW0584A )-Beard-Trimmer-for-Men

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>