ACEFAST D18 In Car 2 In 1 Magnetic Wireless Charging Holder User Guide
- June 16, 2024
- ACEFAST
Table of Contents
D18 In Car 2 In 1 Magnetic
Wireless Charging Holder
User Guide
D18 In Car 2 In 1 Magnetic Wireless Charging Holder
Quick Start Guide
In-car 2-in-1 magnetic wireless charging holder
Product picture
Thank you for purchasing the product.
Please read this user manual carefully and keep it for future reference. If
you need any assistance, please contact our support team with your product
model number and Amazon order number.
Operating Instructions
- Loosen the nut behind the back clip and insert the ball joint, then tighten the nut.
- Fix the holder at the air vent. Turn the knob counterclockwise to open the hook clamp, and turn the knob clockwise to lock the hook clamp.
- The stand needs to be connected to a data cable for power supply.
- Place the mobile phone and the watch on the stand to charge them.
Specifications
| Model | D18 |
|---|---|
| Input | 5V⎓2A, 9V⎓2A, 12V⎓2A |
| Magnetic wireless | 5W / 7.5W / 10W / 15W (Max) |
| Watch wireless charging area | 2.5W (Max) |
| Weight | About 169g / 5.96oz |
| Size | 119×97×130 mm / 4.69×3.82×5.12 in |
| Charging cable | USB-A to USB-C, length 1m |
Compatible with all ip models that have wireless charging capabilities.
LED light display
| Energize | LED light always on |
|---|---|
| Normal charging | LED light breathing |
| Foreign matter | Turn off the LED light after flashing for 5 seconds |
| Charge Complete | LED light always on |
| Watch charging | LED light always on |
Precautions:
Do not disassemble or modify this product by yourself.
Do not place this product in a humid environment.
Please do not charge near a heat source.
Do not allow water or other liquids to flow into the product, otherwise it will
cause
damage to the product.
Do not install this product in the area where the airbag is located.
Do not drop.
Do not scratch the surface of this product with sharp objects to avoid surface
damage.
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help
Changes or modifications not expressly approved by the party responsible for
compliance could void the user’s authority to operate the equipment.
This device complies with Part15 of the FCC Rules. Operation is subject to the
following two conditions:
(1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference
that may cause undesired operation.
RF Exposure Warning Statements:
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment shall be installed and operated with
minimum distance 20cm between the radiator & body.
Shenzhen Houshuxia Technology Co., LTD
www.acefast.com |
support@acefast.com
Rm203, 2nd Floor, Building C, Youth Pioneer Park,
Jianzhi East Road, Tsinghua Community,
Longhead Street, Longhead District, Shenzhen, P. R. China
Shenzhen, 518000, China