AIMEI YMBTUAHC003 TV Sensor Screen Sync Backlights User Manual
- June 16, 2024
- AIMEI
Table of Contents
AIMEI YMBTUAHC003 TV Sensor Screen Sync Backlights User Manual
Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
NOTE: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Warm tips
- When installing the sensor, please install it in the middle of the TV;
- When installing the light strip, please clean the back of the TV in advance, and there is no water;
- When installing the light strip, please stick it to either side from the top middle of the TV;
- Please stay away from sharp objects during the installation process.
Product Details
- Model: TV Sensor Screen Sync Backlights
- Input: 5V-24V(refer to light strip voltage)
- Power: 28W
- Control mode: APP+button+sound control
- Operating temperature: RGBIC/RGB
- Colors: Under 29 inch/55-65 inch/65-75 inch
- Support TV size: 6.56ft/12.47ft/16.4ft
- Light size: -20-60 C
- APP: uLamp
- Supported OS: Android7.0 above or iOS 11.0 above
Dimension & Components
- *LED Strip Light 1
**
-
*Induction &control unit 1
** -
Power Adapter x1
(5V USB without Power Adapter)
Installation Steps
Download method
-
App Store download or app store download
- IOS users can search for “uLamp” on the Apple App Store App Store to download
- Android foreign users can search for “uLamp” on Google Play to download; Android domestic users can search for “uLamp” in the app store to download
Use of functions
-
Add devices
Open the uLamp App, and the home page of the app without adding the device is shown in the following figure. -
After the device is powered on
Click the “Add Device” button or the “+” button at the bottom of the homepage to enter the device addition page, and select the corresponding TV Light to add. -
On the device added successfully page
You can modify the device name after the device is added successfully, and enter the home page of the device details page by default after saving. -
The device details page can control the main device switch, turn on/off linkage, switch scenes, etc., as shown below
-
RGBIC device details page
-
Main equipment TV Light switch button;
-
Click to modify the name of the main device;
-
Scene mode, corresponding to (6) 4 scene classifications, a total of 24 scene modes, namely: Iceland Blue, Glacier Express, Cloud Sea Scene, Sea Fireworks, Snow Cabin, Firefly Night, Game, Holiday, Work, Party, Trend, Sports, Christmas, Valentine’s Day, Halloween,
-
Thanksgiving, Mother’s Day, Father’s Day, Summer Madrigal, Sea Dream, Love and Dream, Spring Fishing, Neon World, Dreamland;
-
Click to enter the segmented smudge color page, which supports global smearing, segmented smearing, erasing, as well as colored cards and recommended combination color;
-
Color sensor work on/off button;
-
DIY scene mode, click the “+” button to enter the DIY page, support fullsegmentation/segmentation, effect, color, brightness, speed and other settings;
-
Scene mode/color adjustment. corresponds to
-
Music rhythm mode, support 6 music rhythm modes, namely: rock, jazz, dassical, rolling, energy, spectrum;
-
Settings. Supports setting of countdown, number of lamp beads and line order
-
RGB device details page
-
Main device TV RGB Light switch button；
-
Sub-equipment linkage switch, turn on/off linkage, (need to buy matching linkage products, no sub-equipment can be turned off)；
-
TV color sensing settings；
-
Scene mode/music mode；
-
TV synchronous sensor on/off；
-
Color saturation adjustment；
-
TV sensor color sensitivity adjustment；
-
Color Shadow enhanced on/off；
-
Color palette and brightness adjustment；
-
The timing switch is set；
-
Product equipment information.