RTAKO RYP-001 Multi Function Bluetooth Device User Manual
- June 16, 2024
- RTAKO
Table of Contents
RYP-001 Multi Function Bluetooth Device
User Manual
Product interface
Parameter Specification
Product name | Selfie stick (including remote control) |
---|---|
Product model | ZP220 Pro |
Product color | black |
Product material | ABS+ stainless steel + silicone |
Product size | 435`84*49mm |
Clamping size | 54mm-90mm |
Net product weight | 635g±5g |
Bluctooth name | RTAKO |
Blue teeth | Bluetooth 5.2 |
Transmitting frequency | 2.4 GHz to 2.483 GH: |
Remote control distance | 10M |
Battery parameter | Polymer lithium battery |
Charging interface | Type-C |
Charge input | 5V 100mA |
Bluetooth remote control introduction
Remote control operation instructions
- Long press ” ” for 3 seconds and click the like button” Power on “, and the blue light of the remote control indicator flashes;
- Turn on the phone “Settings” – “Bluetooth” Turn on Bluetooth, search “RTAKO”, click the device name to pair, the display “After connection”, the indicator stops blinking, that is, the connection is successful (remote control is on).
- Direction key: See Tiktok up and down key switch video, left and right keys slide left and right slide; Small video software, long press “Page up” to increase the volume, long press “page down” to reduce the volume;
- “Like” button: When watching Tiktok (double click like) or other video software, click pause/continue playing, enter the shooting interface and click auto focus (if you need to cancel after liking, you need to cancel manually).
- Shooting key: support the original camera of the phone to shoot (can be used with Bluetooth); Support other photo software/Douyin/Kuaishou and other software to shoot video (a few models need to be set).
- When charging, the indicator light is steady red, and it is turned off after full charging.
- After the remote control is turned on, the Bluetooth connection is not made, and the blue light blinks for connection. After 6 minutes of no operation, the remote control will automatically shut down.
- After the remote control is turned on and successfully connected to the Bluetooth, the remote control does not operate. After 10 minutes, the Bluetooth connection will be automatically disconnected and the remote control will automatically enter the low-power sleep. After 30 minutes the controller link is successful but no operation, the remote control will automatically shut down.
Remote control special instructions
Special note:
(When the Apple IOS system Settings and Tiktok photo key are invalid, the
setting method is as follows)
- Apple 10S13.4 above setting methods: device connected to mobile phone Bluetooth — screen automatic rotation lock — open Settings — auxiliary function — touch — auxiliary touch — open; Systems above 10S15.0 must turn on the auxiliary touch – tracking sensitivity – (turtle icon) to adjust the dot to the middle.
- the original photo album key (the method of adjusting the shutter key position when invalid) : Enter the shooting interface of the software=long pressthe — shooting key of the remote control without moving — at the same time, short press the arrow key to move the” pointer/dot “to the shutter circle of the shooting software, and release the button after adjustment to shoot (the position of the touch key for shooting is different in different phone sizes and different software screens, so adjustment is required).
How to use Selfie stick
-
Hold and use
-
Anti-shake steady use of the sub-handle
The balance handle can rotate 360 “horizontally, and the mechanical balance for video shooting effectively supports the shooting stabilization. -
Open the tripod and stand
1/4 interface is used
1/4 interface compatible with sports cameras, digital cameras, ring lights,
clips, etc.
Matters needing attention
- When using a selfie stick tripod, be careful of pinching your hand.
- Before installing the device, ensure that the selfie stick is in a steady state or firmly turned state to avoid accidental damage to the device.
- Use the selfie stick tripod on a flat ground and keep it away from children to avoid injury or damage to the device.
- The product contains small parts, do not give babies to play, in case of swallowing.
- The remote control contains batteries, do not expose it to high temperature, fire or similar overheating environment for a long time, the remote control is not waterproof, do not enter water or contact corrosive liquids.
- Do not overcharge or overdischarge the battery. Please charge the remote control every 3 months to ensure battery life if you do not use it for a long time.
Warranty Card
Customer Name:……………….
Contact Number: …………………………….
Product Name: ………………………
Purchase Date; ……………………………….
Address: …………………………
Remark:……………………
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to part 15 of the FCC Rules. These limits are
designed to provide reasonable protection againstharmful interference in a
residential installation. This equipment generates, uses and can radiateradio
frequency energy and, if not installed and used in accordance with the
instructions, maycause harmful interference to radio communications. However,
there is No guarantee thatinterference will not occur in a particular
installation. If this equipment does cause harmfulinterference to radio or
television reception, which can be determined by turning the equipmentoff and
on, the user is encouraged to try to correct the interference by one or more
of thefollowing measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and receiver,
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
Caution: Any changes or modifications to this device not explicitly
approved by manufacturer could void your authority to operate this equipment.
This device complies with part 15 of the FCC Rules. Operation is subject to
the following two conditions:
- This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance Ocm between the radiator and your body.
Manufacturer: Dongguan Dianjin Technology Co,, LTD
Address: Room 301, Building 5, No, 487, Tangxia Section, Dongshen Road,
Tangxia Town,
Dongguan City, Guangdong Province
Domestic hotline: 400-878-1101
Made in China
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>