IKEA E2032 Sewing Machine Feet Kit for Sewing Machines Instructions

IKEA E2032 Sewing Machine Feet Kit for Sewing Machines Instructions

This appliance can be used by children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved by a person responsible for their safety. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

Product features

• 8 individual charging slots.

• Charge and store up to 8 pieces of rechargeable batteries.

• Each slot can fit both HR6/AA or HR03/AAA rechargeable battery.

• Charge is terminated by individual minus delta or zero delta voltage detection (-dV/dT or 0dV/dT)

• After batteries are fully charged and the charger remains powered, it will go into trickle charging.
  Batteries can be stored in the charging slots without discharging.

• Safety by separate safety timer and temperature sensors.

• Non-rechargeable and damaged batteries detection.

• Charging status with 2 color LED indicator for each slot.

• Store up to 8 HR6/AA batteries and 4 HR03/AAA additional batteries in the storage compartment inside the lid. HR6/AA storage slots can also fit HR03/AAA batteries.

• Possible to wall mount the charger by the two key holes located on the back

Operating instructions

• Connect the provided power cord with charger and plug it into the power outlet.

• Insert the batteries into the charging slots according to the polarity indications (+/-)

• The LED indicator status:
  White LED pulsing on:
  Charging in progress
  White LED steady on:
  Charging complete Red LED flashing: Error – inserted batteries are nonrechargeable, damaged, have too high temperature or the batteries are not connected in accordance with polarity indications.

• The charger must be+ connected to power outlet for the trickle charging to work during storage.

• Disconnect the charger from the power outlet before cleaning or when it is not used.

Good to know

• Brand new batteries need 2 to 3 times of charging and usage cycles to optimize the battery performance.
• It is normal for batteries to become hot during charging and they will gradually cool down after charging is finished.
• Charging time may vary based on different battery capacities, remaining charge, battery age and temperature in the surrounding area.
• Charger operating temperature: 0°C to 40°C.

CAUTION

• Disconnect the charger from the power outlet before cleaning or when it is not used.
• Use damp cloth when cleaning the charger. Do not immerse into water.
• Risk of Injury. Risk of Electric Shock. Indoor use only.
• Charge only Ni-MH type rechargeable batteries with minimum capacity 500mAh (AAA) or 1000mAh (AA).
• DO NOT TRY TO CHARGE NON-RECHARGEABLE BATTERIES.

Keep this manual for future use.

PRODUCT SERVICING

Do not attempt to repair this product yourself, as opening or removing covers may expose you to dangerous voltage points or other risks.

Technical data

Model: E2032 LITOSFÄR
Input: 100-240VAC, 0.09A
Output: AA 1.5V, 0.24A x 8 AAA 1.5V, 0.12A x 8

Indoor use only

Recommended battery types:
LADDA rechargeable battery AA,
LADDA rechargeable battery AAA

CONFORMS TO UL STD.1310
CERTIFIED TO CSA STD.
C22.2 NO.223-M91

Manufacturer:
IKEA of Sweden AB

Address:
Box 702, SE-343 81
Älmhult, SWEDEN

This device complies with Part 15 of the FCC Rules/ Innovation Science and Economic Development Canada’s licence-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation of the device.

WARNING:

Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the quipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The crossed-out wheeled bin symbol indicates that the item should be disposed of separately from household waste. The item should be handed in for recycling in accordance with local environmental regulations for waste disposal. By separating a marked item from household waste, you will help reduce the volume of waste sent to incinerators or land-fill and minimize any potential negative impact on human health and the environment. For more information, please contact your IKEA store.

MX
Importador/Distribuidor: IKEA Supply Mexico,S.A. de C.V., Calle Oriente 158, número 440, Piso 3, Local JD-01, Colonia Moctezuma, Segunda Sección, Alcaldía Venustiano Carranza, C.P. 15530, Ciudad de México.
Tel. 55-8310-8310.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>