Schneider Electric 052023 Iconic Connected Twin 10 A Socket Instruction Manual

: June 16, 2024
: Schneider Electric

052023 Iconic Connected Twin 10 A Socket

Product Information

Specifications

Product Name: Iconic Connected Twin 10 A Socket
Model Numbers: PDL395CSG, PDL395CSGZ

Features and Functionality

The Iconic Connected Twin 10 A Socket is a high-quality
electrical socket designed for residential and commercial use. It
offers the following features:

Two 10 A power outlets
Connected functionality for remote control and monitoring
Stylish and modern design
Easy installation and operation
Compatible with Schneider Electric’s Iconic series

Device User Guide

The device user guide provides detailed information on how to
install, operate, service, and maintain the Iconic Connected Twin
10 A Socket. It includes step-by-step instructions, safety
information, and troubleshooting tips. Please refer to the user
guide for specific guidance.

Legal Information

The Schneider Electric brand and any trademarks mentioned in
this guide are the property of Schneider Electric SE or its
subsidiaries. All other brands mentioned may be trademarks of their
respective owners.

This guide and its content are protected by copyright laws.
Reproduction or transmission of any part of this guide without
prior written permission from Schneider Electric is prohibited.

Schneider Electric products should only be installed, operated,
serviced, and maintained by qualified personnel. The information in
this guide may be subject to change without notice due to
standards, specifications, and design updates.

Schneider Electric and its subsidiaries assume no responsibility
or liability for errors or omissions in the content of this
material or any consequences resulting from the use of the
information provided.

Product Usage Instructions

Safety Information

Before using the Iconic Connected Twin 10 A Socket, please read
and understand the following safety information:

DANGER

DANGER indicates a hazardous situation that will result in death
or serious injury if not avoided. Failure to follow these
instructions can lead to fatal consequences.

WARNING

WARNING indicates a hazardous situation that could result in
death or serious injury if not avoided.

CAUTION

CAUTION indicates a hazardous situation that could result in
minor or moderate injury if not avoided.

NOTICE

NOTICE is used to address practices not related to physical
injury.

Installation

Follow these steps to install the Iconic Connected Twin 10 A
Socket:

Ensure the power supply is turned off before installation.
Select a suitable location for the socket.
Remove the cover plate from the socket.
Securely attach the socket to the wall or mounting
surface.
Replace the cover plate and ensure it is firmly in place.
Turn on the power supply and test the socket.

Operation

To use the Iconic Connected Twin 10 A Socket:

Ensure the power supply is turned on.
Plug your electrical devices into the power outlets.
Use the connected functionality to remotely control or monitor
the socket if applicable.

Maintenance

Regular maintenance is essential to ensure the optimal
performance and safety of the Iconic Connected Twin 10 A Socket.
Follow these guidelines:

Periodically check the socket for any signs of damage or
wear.
Clean the socket with a dry cloth to remove dust and
debris.
If any issues arise, refer to the troubleshooting section in
the user guide or contact a qualified technician.

Troubleshooting

If you encounter any issues with the Iconic Connected Twin 10 A
Socket, please consult the troubleshooting section in the device
user guide. If the issue persists, contact our customer support for
further assistance.

Frequently Asked Questions (FAQ)

Q: Can I use the Iconic Connected Twin 10 A Socket

outdoors?

A: No, the Iconic Connected Twin 10 A Socket is designed for
indoor use only. It should not be exposed to moisture or extreme
weather conditions.

Q: Is the socket compatible with smart home systems?

A: Yes, the Iconic Connected Twin 10 A Socket is compatible with
various smart home systems. Please refer to the user guide or
contact our customer support for specific compatibility
information.

Q: Can I use this socket with high-powered appliances?

A: The Iconic Connected Twin 10 A Socket is designed for
standard electrical devices with a maximum power rating of 10 A. It
is not suitable for high-powered appliances such as air
conditioners or electric heaters.

Iconic Connected Twin 10 A Socket
Device user guide
Information about features and functionality of the device. 05/2023
www.pdl.co.nz

Legal Information
The Schneider Electric brand and any trademarks of Schneider Electric SE and its subsidiaries referred to in this guide are the property of Schneider Electric SE or its subsidiaries. All other brands may be trademarks of their respective owners.
This guide and its content are protected under applicable copyright laws and furnished for informational use only. No part of this guide may be reproduced or transmitted in any form or by any means (electronic, mechanical, photocopying, recording, or otherwise), for any purpose, without the prior written permission of Schneider Electric.
Schneider Electric does not grant any right or license for commercial use of the guide or its content, except for a non-exclusive and personal license to consult it on an “as is” basis. Schneider Electric products and equipment should be installed, operated, serviced, and maintained only by qualified personnel.
As standards, specifications, and designs change from time to time, information contained in this guide may be subject to change without notice.
To the extent permitted by applicable law, no responsibility or liability is assumed by Schneider Electric and its subsidiaries for any errors or omissions in the informational content of this material or consequences arising out of or resulting from the use of the information contained herein.

Table of Contents
Safety information……………………………………………………………………………4 Iconic Connected Twin 10 A Socket…………………………………………………5
For your safety ……………………………………………………………………………….5 About the device……………………………………………………………………………..5 Installing the device …………………………………………………………………………5 Changing device protocol ………………………………………………………………….6 Pairing the device ……………………………………………………………………………6
Pairing Zigbee device manually……………………………………………………..6 Pairing Zigbee device with auto scan………………………………………………8 Pairing Bluetooth device manually………………………………………………….9 Manual operation…………………………………………………………………………..10 Configuring the device …………………………………………………………………… 11 Changing the device icon ………………………………………………………….. 11 Renaming the device ………………………………………………………………..12 Changing the device location ………………………………………………………12 Zigbee Mode ………………………………………………………………………………..13 Using the device ………………………………………………………………………13 Removing the device…………………………………………………………………21 Bluetooth Mode …………………………………………………………………………….22 Socket settings ………………………………………………………………………..22 Using the device ………………………………………………………………………25 Removing the device…………………………………………………………………29 Resetting the device manually ………………………………………………………….29 LED Indication………………………………………………………………………………31 Troubleshooting ……………………………………………………………………………31 Technical Data ……………………………………………………………………………..32 Compliance …………………………………………………………………………………. 33 Compliance information for Green Premium products ……………………….33 Trademarks …………………………………………………………………………….33

DUG_Iconic Connected Twin 10 A Socket_PDL-00

3

Safety information

Important information
Read these instructions carefully and look at the equipment to become familiar with the device before trying to install, operate, service, or maintain it. The following special messages may appear throughout this manual or on the equipment to warn of potential hazards or to call attention to information that clarifies or simplifies a procedure.
The addition of either symbol to a “Danger” or “Warning” safety label indicates that an electrical hazard exists which will result in personal injury if the instructions are not followed.
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all safety messages that accompany this symbol to avoid possible injury or death.

DANGER
DANGER indicates a hazardous situation which, if not avoided, will result in death or serious injury. Failure to follow these instructions will result in death or serious injury.
WARNING
WARNING indicates a hazardous situation which, if not avoided, could result in death or serious injury.
CAUTION
CAUTION indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE
NOTICE is used to address practices not related to physical injury.

4

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Iconic Connected Twin 10 A Socket

PDL395CSG, PDL395CSGZ
For your safety
DANGER
HAZARD OF ELECTRIC SHOCK, EXPLOSION, OR ARC FLASH · It is illegal for persons other than an appropriately licensed electrical
contractors or other persons authorised by legislation to work on the fixed wiring of any electrical installation. · To comply with all safety standards, the device must be used only for the purpose described in this instruction and must be installed in accordance with the wiring rules and regulation in the location where it is installed. · Lock out and tag the input circuit before accessing the wiring connections. · There are no user serviceable parts inside the device. Failure to follow these instructions will result in death or serious injury.
About the device
The Iconic Connected Socket Twin 10 A (hereinafter referred as Iconic Socket) is a connected electrical outlet designed to manage and control electrical devices in a convenient and efficient manner. It provides app controlled switching of plug-in appliances using the Wiser by SE app. In BLE mode, the socket has a 12-24 hr time delay and 24/7 schedule functionality. In Zigbee mode, the socket can be integrated into Moments and Automations or simply be operated with time-scheduled output. When the manual switch on the socket is in the smart position, the socket can be controlled remotely.
Installing the device
Refer to the installation instruction supplied with this product. See Iconic Connected Twin 10 A Socket, Zigbee/BLE.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

5

Changing device protocol

Iconic Connected Twin 10 A Socket

The communication protocol of the device can be changed from Zigbee® to Bluetooth® and Bluetooth® to Zigbee®.
To change the pairing mode: Short press the touch button 3 times and then long press once (> 30s).

Smart

3x <0,5s + 1x 20s
Bluetooth pairing mode changes to Zigbee pairing mode, or Zigbee pairing mode changes to Bluetooth pairing mode.
Pairing the device
Using the Wiser app, pair your device with the Wiser Hub to access and control the device. You can either add the device manually or do an auto-scan to pair it.
Pairing Zigbee device manually
To pair the device manually: 1. On Home page, tap +. 2. Tap and select the required Wiser Hub on the slide-up menu. 3. Select an option to add the device (A): Add Device with Install Code Add Device without Install Code
Add Device

Install Code is Recommended
To enhance network security, we strongly recommend using the install code to add a
device. If you are unable to scan or type the install code, you can still add the device without it.

Add Device with Install Code

A

Add Device without Install Code

TIP: It is recommended to add the device with install code.

6

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
4. To pair the device with install code, tap Add Device with Install Code to display the slide-up menu. Select any one of the options (B): Scan Install Code: you can scan the device for the install code. Enter Install Code Manually: you can manually enter the install code from the device. After scanning or entering the install code, proceed to Step 6.
Add Device

Install Code is Recommended
To enhance network security, we strongly recommend using the install code to add a
device. If you are unable to scan or type the install code, you can still add the device without it.

Add Device with Install Code

Add DevSiccaenwIintshtoaulltCInodsetall Code

B

Enter Install Code Manually

Cancel

5. To pair the device without install code, tap Add Device without Install Code. 6. Short press the LED panel 3 times (< 0,5 s).

The LED blinks white.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

7

Iconic Connected Twin 10 A Socket 7. In the app, select Confirm both LEDs are flashing and tap Start
Configuration (C).
Cancel How to Pair Device Please tap LED panel 3 times
C
Wait for a few minutes for the app to connect with Iconic Socket. 8. Once the device is added in the app, tap Done.
Pairing Zigbee device with auto scan
Pairing the device with auto scan automatically discovers the device when the corresponding device is powered on. To pair the device with auto scan:
1. On the Home page, tap +. 2. Tap Auto scan > Confirm. 3. Enable permissions to Access location and Wi-Fi for scanning device and
tap Start scanning. NOTE: If you have multiple hubs, do Step 4 or proceed to Step 5.
4. Tap Select hub and select the Wiser hub from the slide-up menu. 5. Short- press the touch button three times.
NOTE: Wait for a few seconds until the device search is complete. TIP: If you want to pair multiple devices at once, perform step 5 on each device and wait for a few seconds for them to be detected.

8

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket 6. Tap Next (A), select Iconic Socket.
Auto Scan
Iconic Socket

7. Once the device is added successfully, tap Done.

Pairing Bluetooth device manually
Using the Wiser app, you can pair the device with smartphone to access and control the device.
NOTE: When pairing the Bluetooth device with the Wiser app, be within a range of 8 to 10 m of the module. Range can be affected by wall thickness and construction materials.
1. On Home page, tap + then tap .
2. Short press the LED panel 3 times (< 0,5 s).

The LED blinks white alternatively.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

9

Iconic Connected Twin 10 A Socket
3. In the app, select Confirm LED indicator is flashing and tap Start Configuration (A).
Cancel How to Pair Device Please tap LED panel 3 times

A
NOTE: Enable permissions to nearby devices and Bluetooth for scanning the device. 4. Tap to select and add the device from the list and then tap Next > Done. NOTE: The device can be paired with max. 8 smartphones. To pair an additional phone, you must unpair one of the existing phones. Refer managed paired phones, page 24.

Manual operation
Socket can be operated manually using rocker switch and touch switch.

Rocker switch

Off state · No power is available at the socket. · The socket cannot be remotely switched using Wiser app. · Timer and scheduler has no effect on the socket.
Smart state · Power is available at the socket. · The socket can be remotely switched using Wiser app. NOTE: A socket that is remotely switched off using the Wiser app has no power at all, even if the rocker switch is set to smart mode. To find out if a socket is On, tap the touch switch (see Power indication below). · Timer and scheduler operates the socket if configured.

Smart

10

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Touch switch
Power indication · Tap the touch switch to find out if a socket is on. · Arrows displayed in the touch switch indicate that power available at a socket: Left arrow LED on: power available at left socket. Right arrow LED on: power available at right socket.

Smart

Configuring the device
Changing the device icon
You can change the device icon using the Wiser app. 1. On the Home page, select the device for which you wish to change the icon.
2. At the top-right corner of the screen, tap .
3. Tap edit next to the device name. 4. Tap Icon to view the menu. 5. In the slide-up menu, select any one of the following (A) to change the device
icon: Take photo – allows you to take a photo with your device camera. Select from Icon Library – allows you to select an icon from the app
library. Select from Album – allows you to select a photo from the mobile gallery.

Icon Name Location

Take photo

Select from Icon Library

A

Select from album

Cancel

DUG_Iconic Connected Twin 10 A Socket_PDL-00

11

Iconic Connected Twin 10 A Socket
Renaming the device
You can rename the device using the Wiser app. 1. On the Home page, select the device for which you wish to rename. 2. At the top-right corner of the screen, tap . 3. Tap edit next to the device name. 4. Tap Name, enter the new name (A) and then tap Save.

Icon

Rename

Name LocationCancel

A
Save

Changing the device location

You can change the device location using the Wiser app. 1. On the Home page, select the device for which you wish to change the location.

2. At the top-right corner of the screen, tap . 3. Tap edit next to the device name. 4. Tap Location. 5. Select the desired location from the list (A) and then tap Save.

Device location

Save

Living Room Master Bedroom Kitchen
A
Dining Room Study Room Kids Room

12

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Zigbee Mode
Using the device
The Control Panel allows you to switch on/off the socket and control various settings. On the Home page, tap All devices > Iconic Socket to access the control panel. On the control panel page, you can see the following:
· The current state of the socket (A) · Schedule, page 14 (B) · Settings, page 23 (C)
Iconic Socket

A

On

B C
Switching on/off the device using app
By using the Wiser app, you can switch on/off the device. NOTE: Using the Wiser app, you can only operate the socket remotely if the rocker switch is in a smart state.

Smart

1. In home page, next to device name, tap the for common function. 2. Select the left/right socket (A).

DUG_Iconic Connected Twin 10 A Socket_PDL-00

13

Iconic Connected Twin 10 A Socket

3. Tap the power button (B) to switch on/off.

My Home Welcome Home

Home

All Devices

· · ·

Iconic Socket
A

B

Home
TIP: You can also navigate to the control panel, page 13 of the device and tap to switch on/off the socket .

Setting up a schedule

The device can be fully controlled by schedule. Once the schedule is set, the device operates at a given time.
1. In the device control panel, tap Schedule > Left Socket/Right Socket.
2. Tap Add Scheduleand set the time (A). NOTE: The schedule works according to the time zone where the device is located.
3. Tap Repeat (B) to select the days you want to set the schedule.
4. Tap Note (C), enter the note and tap Confirm.
5. Tap the toggle switch (D) to turn on the Notification for the schedule. The app will send a notification that the scheduled task is executed at the scheduled time.
6. Tap Left Socket/Right Socket (E) and select any option, On or Off.

Add Schedule

Save

Add Schedule

Save

Repeat Note

10 55 11 56 12 57

A

Once

B

C

D

On

E

Repeat Note

11 59 12 00 13 01

A

Once

B

C

D

On

E

7. Tap Save

14

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Creating a moment
A Moment allows you to group multiple actions that are usually done together. Using the Wiser app, you can create moments based on your needs (such as movie night). To create a moment:
1. On the Home page, tap . 2. Go to Moment > + to create a moment.
3. Tap Edit name , enter the name of the moment (A) and tap Save. TIP: You can choose the cover image that represents your moment by tapping .
Cancel Moment settings Save
Edit name

Action
A

Edit name Add Task

(0/10)

Cancel

Save

4. In the Action section, tap Add task (B) to open the slide-up menu. 5. In the Add task menu, you can do either or all of the following actions (C):
Run the device: select the devices that you want in a moment. Select Automation: select the automation that you want to enable or
disable. Delay: set the delay time.
NOTE: You can add one or more actions using .
Cancel Moment settings Save
Edit name

Action

(0/10)

Add Task

B

Add Task

Run the device

Select Automation

C

Delay

DUG_Iconic Connected Twin 10 A Socket_PDL-00

15

Iconic Connected Twin 10 A Socket

6. Tap Run the device > Iconic Socket, tap on the required socket (Left Socket/Right Socket) to select either or all of the functions to add in the moment: On: switch on the respective socket (D). Off: switch off the respective socket (E). Reverse Switch: toggle the last state of the socket (F).

Select function

D

On

D

E

F

Cancel

Save

7. Set all actions and tap Save.
Cancel Moment settings Save
Edit name

Action
Iconic Socket
Show on Home Page

Cancel

Save

Editing a moment

1. On the Moment tab, locate the moment you want to edit and tap .
2. On the Edit page, you can tap each item (such as dimmer, shutter, delay, temperature, etc.) to change the settings. TIP:
· You can add one or more actions using . · To delete an existing action, slide each item towards left and tap
Delete.

16

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket

Deleting a moment

To delete a moment: 1. On the Moment tab, locate the moment that you want to delete and then tap . 2. Tap Delete and then tap Ok. NOTE: After deleting a moment, the device action can no longer be triggered.

Creating an automation
An automation allows you to group multiple actions that are usually done together, triggered automatically or at scheduled times. By using the Wiser app, you can create automations based on your needs. To create an automation:
1. On the Home page, tap the . 2. Go to Automation > + to create an automation. 3. Tap Edit name, enter the name of the automation (A) and tap Save.
TIP: You can choose the cover image that represents your automation by tapping .
Cancel Automation settings Save
My Automation

Any condition is met Edit name

(0/10)

Add Condition
A

Action Cancel

(ASdadvede 0/80)

Add Task

All-Day

DUG_Iconic Connected Twin 10 A Socket_PDL-00

17

Iconic Connected Twin 10 A Socket
4. Tap Any condition is met to select any one of the condition type (B): All conditions are met: automation is triggered when all the conditions are met. Any condition is met : automation is triggered when at least one condition is met.
Cancel Automation settings Save
My Automation

Any condition is met

(0/10)

Add Condition

Action

(Added 0/80) Add Task

Select Condition type
All conditions are met
B
Any condition is met
Cancel

5. Tap Add Condition to open the slide-up menu. 6. In the Add Condition menu, you can do either or all of the following options
(C): When weather changes: select the various weather settings. Schedule: set the time and day. When device status changes: select the device and it’s function.
Note: You can add one or more conditions using .
Cancel Automation settings Save
My Automation

Any condition is met

(0/10)

Add Condition

When weather changes

Schedule

C

When device status changes

7. Tap When device status changes > Iconic Socket and select either or all the functions: Left Socket: turn on/off the left socket. Right Socket: turn on/off the right socket.
8. Tap Add task to open the slide-up menu.

18

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
9. In the Add task menu, you can do either or all of the following options (D): Run the device: select the devices that you want to be triggered. Moment or Automation: select the moment which you want to trigger or select the automation that you want to enable or disable. Send notification: turn on notification for the automation. Delay: set the delay time.
NOTE: You can add one or more actions using .
Cancel Automation settings Save
My Automation

Any condition is met

(0/10)

Add Condition

Action

(Added 0/80) Add task

Run the deAvdidceTask

Moment or Automation
D
All-Day

Delay

10. Tap on Effective period to set the time range for the automation. You can select any one of the following (E): All-day: 24 hours Daytime: from sunrise to sunset Night: from sunset to sunrise Custom: user defined time period
Next
All-day 24 hours
Daytime From sunrise to sunset
Night From sunset to sunrise
E Custom

Repeat City

Everyday

11. Set all the actions and conditions, then tap Save. Automation is now available under Automation tab. Use toggle switch to enable/disable automation.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

19

Iconic Connected Twin 10 A Socket
Example of an automation
This demonstration shows you how to create an automation to turn on the cooler connected to left iconic socket when the temperature is above 32 º C.
1. Go to Automation > + to create an automation. 2. Tap Edit name, enter the name of the automation and tap Save.
TIP: You can choose the cover image that represents your automation by tapping . 3. Tap Add Condition > When device status changes > Temperature Humidity Sensor > Current Temperature. 4. Set the temperature to 32 º C (A) and select greater then (>) (B), then tap Next.
Current Temperature Next
B

32.0

A

C

5. Tap Add task > Run the device > Iconic Socket > Left Socket > On > Save > Next.
6. In the Automation Settings page, tap Save.
Cancel Automation settings Save
My Automation
Any condition is met C
Action
Iconic Socket
All-Day
Once the automation is saved, it is visible on the Automation tab. You can tap the toggle switch on the automation to enable/disable it.

20

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Editing an automation
1. On the Automation tab, locate the automation you want to edit and tap . 2. On the Edit page, you can tap each item (such as dimmer, shutter, delay,
temperature, etc.) to change the settings. TIP: · You can add one or more condition or actions using . · To delete an existing condition or action, slide each item towards left and tap Delete.
Deleting an automation
1. On the Automation tab, locate the automation that you want to delete and then tap .
2. Tap Delete and then tap Ok. NOTE: After deleting an automation, the device action can no longer be triggered.
Removing the device
Using the Wiser app, you can remove a device from the device list. 1. On the Home page, tap All devices > Iconic Socket. 2. Tap to display more details. 3. Tap Remove and Factory Reset Device (A).
More Iconic Socket
A
TIP: On the Home page, tap and hold the Iconic Socket to remove the device. NOTE: By removing the device, you will reset the device. If you still have a problem with the reset, then refer to resetting the device, page 29.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

21

Bluetooth Mode

Iconic Connected Twin 10 A Socket

Socket settings
Using the Wiser app, you can manage the socket modes and settings. 1. On the Home page, tap All devices > Iconic Socket. 2. Tap Settings and select any of the following: · Channel Name, page 23 (A) · Channel Mode, page 23 (B) · Synchronization Time, page 24 (C) · Manage Paired Phone, page 24 (D) · Reset Device Settings, page 25 (E)
Settings
A

B
C D E

22

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Channel name
You can rename the socket using the Wiser app. 1. On the Settings page, select the channel: · Channel 1 Name: to rename the left socket. · Channel 2 Name: to rename the right socket. 2. Enter the name (A) and tap Save.
Settings

Cancel

A
Save

Channel mode

Using mode setting, timer can be set to turn off the device after a set period of time or you can set it as a switch to turn on/off manually.
1. On the Settings page, tap on respective channel.
2. Select the mode. Switch: turn on/off the device. Timer: set the timer to turn off the device. Refer using mode timer, page 27.

Settings

Timer

Timer Cancel
3. Tap Confirm.

Cancel

DUG_Iconic Connected Twin 10 A Socket_PDL-00

23

Iconic Connected Twin 10 A Socket
Synchronization Time
Using Wiser app, you can synchronize the time of the device with your smartphone. On the Settings page, tap Synchronization Time > Update Time & Date (A). This allows the device time to sync with smartphones in real-time.
Time Synchronization
smartphone Device Current Time Device Current Date
A
Manage Paired Phone
Using Wiser app, you can view or delete paired phones. On Settings page, tap Manage Paired Phone and select any of the following (A): – Delete all Devices: the device is removed from all paired phones. – Delete my Device: the device is removed from current phone.
Manage Paired Phone
A

24

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Reset device settings
Using Wiser app, you can reset the device settings to default. On Settings page, tap Reset device settings. Read the information and tap Confirm (A).
Settings
A

NOTE: This action will reset the device to default factory settings.

Using the device

The Control Panel allows you to switch on/off and control various settings.
On the Home page, tap All devices > Iconic Socket to access the control panel.
On the control panel page, you can see the following: · The current state of the socket (A) · Mode indicator (B) · Settings, page 22 (C) · Schedule, page 28 (D) · Timer count down, page 27 (E)

Iconic Socket

On
B C D

A

On

00:04:58
B C D

A
On
E
00:04:58

DUG_Iconic Connected Twin 10 A Socket_PDL-00

25

Iconic Connected Twin 10 A Socket
Switching on/off the device using app
By using the Wiser app, you can switch on/off the device. NOTE: The socket can be remotely operated using Wiser app only when the rocker switch is in smart state.

Smart

1. In home page, next to device name, tap the for common function. 2. Select the left/right socket (A). 3. Tap the power button (B) to switch on/off.

My Home Welcome Home

Home

All Devices

· · ·

Iconic Socket
A

B
Home
TIP: You can also navigate to the control panel, page 25 of the device and tap to switch on/off the socket . NOTE: During timer mode, the socket automatically turns off after a specified period of time. Refer timer mode, page 27.

26

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Setting timer mode
You can set the timer to turn off the device after a certain period of time. In Wiser app, change the mode from switch to timer, refer to mode settings, page 23
1. On the device control panel page, tap timer (A) for the slide-up menu.
Iconic Socket

On 00:04:58

On
A
00:04:58

2. In the slide-up menu select the required Set Period (B) and tap Save.

Set Period

2 min

5 min

10 min

B

20 min

Customized Period

Cancel

Save

Once the countdown timer reaches zero, the device turns off.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

27

Iconic Connected Twin 10 A Socket

Creating a schedule

Using a schedule, you can control and trigger the device. The system will follow the active schedule once it has been set. You can create or modify schedules at any time.
1. On the Home page, tap All devices > Iconic Socket.
2. Tap Schedule, tap on the socket for which you need to set the schedule then tap Add schedule.
3. Tap (A) to set the start time and tap (B) to set end time.

Cancel

Schedule

Save

A

B

Tue

Thu

Sat Sun

4. Tap (C) and select any one of the following: Sunrise: schedule will be triggered at sunrise. Sunset: schedule will triggered at sunset. Custom: to set the required start/end time (D).
5. Tap (E) and select any one of the following: On: to turn on the device. Off: to turn off the device.

Settings

Save

Start time
04
05 06 07
08

Custom

C

00

D

01

02

Settings

Save

End time
07
08 09 10
11

Custom

C

00

D

01

02

Power

On

E

Power

E

6. Select the days you want to repeat the schedule (F).

28

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket

7. Tap Month Repeat (G) to set the months you want to repeat the schedule.

Cancel

Schedule

Save

Tue

Thu

Sat Sun

F

G

8. Tap Save.
Removing the device
Using the Wiser app, you can remove a device from the device list. 1. On the Home page, tap All devices > Iconic Socket. 2. Tap to display more details. 3. Tap Remove device (A) and select any of the following: Disconnect: to remove the device. Disconnect & Erase Data: to remove the device and erase data.
More Iconic Socket

Remove Device

A

TIP: On the Home page, tap and hold the Iconic Socket to remove the device.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

29

Iconic Connected Twin 10 A Socket
Resetting the device manually
You can reset the device to factory default manually. Short press the touch button three times (<0,5 s) and then long press the touch button once (>10 s). After 10 s, release the touch button when the LED starts blinking white.
The device is in reset mode. It is reset to the factory settings after 10 seconds.

30

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
LED Indication
Pairing
User Action Press the touch button 3 times
Resetting
User Action Press the push-button 3 times and long press once for > 10 s.
Changing protocol
User Action Short press the push-button 3 times and long press once for > 20 s.

LED Indication Left and right LED blinks white.
White LED blinks left and right alternately.

Status
Zigbee pairing mode is active for 30 seconds.
Bluetooth pairing mode is active for 30 seconds.

LED Indication White LED blinks faster.

Status
The device is in reset mode. It is reset to the factory settings after 10 seconds.

LED Indication White LED blinks rapidly.

Status
Pairing mode changes from zigbee to blietooth or bluetooth tozigbee

Troubleshooting
Error The device is not ready to pair after the device is removed from the app.

Possible cause The device is not reset correctly.

Solution
Reset to factory default settings, refer to Resetting the device manually, page 29.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

31

Technical Data
Nominal voltage Max load rating LED indicator Supported protocols Compliance
Power failure data retention Environmental rating Operating humidity Specifications typical at 25 °C

Iconic Connected Twin 10 A Socket
AC 240 V ~, 50 Hz 10 A Yes Zigbee, BLE Safety: AS/NZS 3112,AS/NZS 60669.2.1 EMC: AS/NZS 60669.2.1 RF: AS/NZS 4268 Internal date/time retained for at least 6 hrs. Settings preserved indefinitely. IP20 (designed for indoor use only) 5%90% RH, non-condensing

32

DUG_Iconic Connected Twin 10 A Socket_PDL-00

Iconic Connected Twin 10 A Socket
Compliance
Compliance information for Green Premium products
Find and download comprehensive information about Green Premium products, including RoHS compliance and REACH declarations as well as Product Environmental Profile (PEP) and End-of-Life instructions (EOLI). https://checkaproduct.se.com/
General information about Green Premium products
Click the link below to read about Schneider Electric’s Green Premium product strategy. https://www.schneider-electric.com/en/work/support/green-premium/

Trademarks

This guide makes reference to system and brand names that are trademarks of their relevant owners.
· Zigbee® is a registered trademark of the Connectivity Standards Alliance.
· Bluetooth® is a registered trademark of the Bluetooth Special Interest Group (SIG).
· Apple® and App Store® are brand names or registered trademarks of Apple Inc.
· Google PlayTM Store and AndroidTM are brand names or registered trademarks of Google Inc.
· Wi-Fi® is a registered trademark of Wi-Fi Alliance®.
· WiserTM is a trademark and the property of Schneider Electric, its subsidiaries and affiliated companies.
Other brands and registered trademarks are the property of their respective owners.

DUG_Iconic Connected Twin 10 A Socket_PDL-00

33

Schneider Electric (NZ) Ltd Building 6 Level 2. 60 Highbrook Drive, East Tamaki, Auckland 2013 New Zealand Customer Care: 13 73 28 www.pdl.co.nz
As standards, specifications, and design change from time to time, please ask for confirmation of the information given in this publication.
© 2023 2023 Schneider Electric. All rights reserved. DUG_Iconic Connected Twin 10 A Socket_PDL-00