Comset CM580W Outdoor Router User Guide

: June 16, 2024
: Comset

Table of Contents

Comset CM580W Outdoor Router
Product Information
FAQ
Package content
Interface Overview
Major parameters
Installation instructions
Access to the internet
Log in to the CPE
LED Indicator
Documents / Resources

Comset CM580W Outdoor Router

Comset-CM580W-Outdoor-Router-FIG-1

Product Information

Specifications:

Wi-Fi: 802.11AX 2.4GHz/5.8G
Speed: AX3000

Package Content:

Outdoor 5G CPE
Ethernet Cable
POE Power Adapter
Quick Start Guide
Mounting Bracket

Interface Overview:
The outdoor 5G CPE provides a brand new internet surfing experience. It supports Wi-Fi 802.11AX with a speed of AX3000. The major parameters of the CPE are as follows:

Wi-Fi: 802.11AX 2.4GHz/5.8G
Speed: AX3000

Installation Instructions:

Take out the outdoor 5G CPE and uncover the SIM card slot using a screwdriver.
Install the SIM card into the slot according to the direction marked on the terminal.
Put the waterproof slot cover onto the SIM card slot and lock it with screws.
Install the bracket onto the outdoor 5G CPE and then fix it on a pole or wall with good 5G/LTE signal.
Choose an RJ45 network cable with a suitable length and insert it into the RJ45 port of the CPE.
Connect the other end of the cable to the WAN port of the POE power adapter or a Wi-Fi router/switch that supports POE.

Access to the Internet:
User devices can access the internet by connecting to the LAN port of the POE power adapter through an RJ45 cable. If a Wi-Fi router or switch is connected to the outdoor 5G CPE, user devices can access the internet by connecting to the LAN port or Wi-Fi SSID of the router or switch.

Log in to the CPE:

To access more advanced settings, enter the domain name “islogin.com” or IP address “192.168.100.1” in the browser.
The default username and password for the Web portal are both “admin”.
Ensure that the 5G CPE is working normally and your computer is connected to it.
You can connect your computer to the 5G CPE either through a cable or through the built-in Wi-Fi of the CPE.
The default Wi-Fi SSID is “Comset_5G_CPE” and the password is “123456789”.
Configure parameters in the configuration page according to your telecom service provider’s recommendation.

FAQ

What is the default username and password for the Web portal?
The default username is “admin” and the password is also “admin”.
What is the default Wi-Fi SSID and password?
The default Wi-Fi SSID is “Comset_5G_CPE” and the password is “123456789”.
How can I access more advanced settings of the CPE?
You can enter the domain name “islogin.com” or IP address “192.168.100.1” in your browser to access the advanced settings.
What should I do if the SIM card is not recognized or abnormal?
Make sure the SIM card is properly installed according to the direction marked on the terminal and check if the waterproof slot cover is securely locked with screws.

Thank you for choosing the outdoor 5G CPE that will bring you brand new internet surfing experience. This quick start guide is to help you set up your CPE, connect it to the 5G network, and access the internet through the ethernet port or via Wi-Fi.

Package content

Outdoor 5G CPE
Ethernet Cable
POE Power Adapter
Quick Start Guide
Mounting Bracket

Interface Overview

Comset-CM580W-Outdoor-Router-FIG-3

Major parameters

Operating temperature:- 20℃-+55℃
Relative humidity: 5%-95%
Power: Input AC 110-240V, 50/60Hz; output DC 48V /1A
Dimension: 140x130x45mm（Excluding antennas)
Weight: 1.8Kg
Interface: Nano SIM card, 2.5G Ethernet port (POE), USB Type-c, Wi Fi: 802.11AX 2.4GHz/5.8G Speed: AX3000

Installation instructions

Take out the outdoor 5G CPE, uncover the SIM card slot with a screwdriver, install the SIM card into the slot according to the direction marked on the terminal, then put the waterproof slot cover onto the SIM card slot and lock it with screws.
Install the bracket onto the outdoor 5G CPE, and then fix it on a pole or wall in a position where there is good 5G/LTE signal.
According to the actual scenario, choose an RJ45 network cable with the suitable length. Use a standard 8-core network cable such as CAT5E or CAT6 cable. On one end of the cable, the waterproof protective sleeve is set, and the network cable is inserted into the RJ45 port; The other end of the cable is connected to the WAN port of the POE power adapter, or the WAN port of a Wi-Fi router or a switch that supports POE (Wi-Fi router or switch should be purchased additionally).
Attention:
- Do not install or unplug SIM card when the power is on.
- When picking up the SIM card, do not touch the metal contact surface to avoid electrostatic damage to the card.

Access to the internet

The user devices may access the internet by connecting to the LAN port of the POE power adapter through an RJ45 cable; If a Wi-Fi router or a switch is connected to the outdoor 5G CPE, the user devices may access the internet by connecting to the LAN port or Wi-Fi SSID of the Wi-Fi router or switch.

Checklist
Before accessing the internet, please check the following items.

Power indicator is on.
SIM card LED is on. If not, check SIM card is inserted properly.
RF LED is on. The more bars, the better the signal.

Log in to the CPE

For more advanced settings, the user can access the Web portal of the outdoor 5G CPE by inputting domain name “islogin.com” or IP address “192.168.100.1” in the browser. The default username of the Web portal is “admin”, and the password is “admin”.
When configuring the 5G CPE, make sure it works normally and the computer is connected to it. Besides connecting your computer to the 5G CPE through a cable, you can also connect through the built-in Wi-Fi
of the 5G CPE. The default Wi-Fi SSID is “Comset_5G_CPE”, and the password is “123456789”.
Parameters in the configuration page should be prudently configured according to telecom service provider’s recommendation. Improper configuration may lead to failure to access the internet.