Midea MSU16U6DBBC Warm and Cool Mist Ultrasonic Humidifier User Manual

Midea MSU16U6DBBC Warm and Cool Mist Ultrasonic Humidifier

Product Information

Specifications

• Model : MSU16U6DBBC
• Type : Warm and Cool Mist Ultrasonic Humidifier
• Capacity : 1.6 Gallon

Product Overview

The Midea 1.6 Gallon Warm and Cool Mist Ultrasonic Humidifier is designed to provide both warm and cool mist for optimal comfort and humidity control in your home. It features a large water tank capacity, allowing for extended use without frequent refills. The ultrasonic technology ensures quiet operation, making it suitable for use in bedrooms, living rooms, and offices.

Safety Instructions

The following safety instructions should be followed to ensure safe operation of the humidifier:

• Inspect the packaging and appliance upon arrival to ensure everything is intact. If any damage is found, contact the retailer or dealer.
• Do not modify or alter the appliance as it may lead to hazards and void the warranty.
• Observe all symbols and warnings provided in the manual.
• Only authorized service technicians should operate and maintain the appliance.
• Read and keep the operating instructions for future reference.
• Ensure the power cord is unplugged before cleaning, maintaining, or moving the humidifier.
• Avoid using the humidifier near flammable items or heat sources.
• Do not use the humidifier with hard water to prevent mineral buildup.
• If the power cord is damaged, it must be replaced by the manufacturer or a professional service department.
• In case of thunderstorms, power off the humidifier and unplug the power cord.

Operation Instructions

Follow these instructions to operate the Midea Warm and Cool Mist Ultrasonic Humidifier:

1. Place the humidifier on a flat, stable surface.
2. Remove the water tank by lifting it from the base.
3. Fill the water tank with clean, cool tap water. Do not exceed the maximum fill line.
4. Place the water tank back onto the base and ensure it is properly seated.
5. Connect the power cord to a suitable electrical outlet.
6. Press the power button to turn on the humidifier.
7. Select the desired mist setting (warm or cool) using the control panel.
8. Adjust the mist output level using the control panel.
9. The humidifier will automatically maintain the set humidity level. Refill the water tank when needed.
10. To turn off the humidifier, press the power button again.

Cleaning and Maintenance

Regular cleaning and maintenance of the humidifier is important to ensure optimal performance and prevent bacterial growth. Follow these steps:

1. Ensure the humidifier is turned off and unplugged before cleaning.
2. Remove the water tank and empty any remaining water.
3. Separate the water tank from the base, if applicable.
4. Clean the water tank and base with a mild detergent and warm water.
5. Rinse thoroughly to remove any soap residue.
6. Use a soft brush to clean hard-to-reach areas.
7. Wipe the exterior surfaces with a damp cloth.
8. Allow all parts to air dry completely before reassembling.
9. Perform regular maintenance as recommended in the manual.

Troubleshooting

If you encounter any issues with the Midea Warm and Cool Mist Ultrasonic Humidifier, refer to the troubleshooting section in the manual for possible solutions. If the problem persists, contact the manufacturer or authorized service center.

FAQ

Q: Can I use essential oils with this humidifier?

A : No, it is not recommended to use essential oils with this humidifier as it may cause damage to the unit.

Q: How often should I clean the humidifier?

A : It is recommended to clean the humidifier at least once a week to prevent bacterial growth and maintain optimal performance.

Q: Can I leave the humidifier running overnight?

A : Yes, the humidifier can be left running overnight. However, make sure to follow the operating instructions and refill the water tank as needed.

Q: Does this humidifier have an automatic shut-off feature?

A : Yes, the humidifier has an automatic shut-off feature that activates when the water level is low or when the desired humidity the level is reached.

Warning notices : Before using this product, please read this manual carefully and keep it for future reference. The design and specifications are subject to change without prior notice for product improvement. Consult with your dealer or manufacturer for details. The diagram above is just for reference. Please take the appearance of the actual product as the standard.

THANK YOU LETTER

Thank you for choosing Midea! Before using your new Midea product, please read this manual thoroughly to ensure that you know how to operate the features and functions that your new appliance offers in a safe way.

SAFETY INSTRUCTIONS

Intended Use

The following safety guidelines are intended to prevent unforeseen risks or damage from unsafe or incorrect operation of the appliance. Please check the packaging and appliance on arrival to make sure everything is intact to ensure safe operation. If you any damage, please contact the retailer or dealer. Please note that alterations to the appliance are not allowed for your safety concerns. Unintended use may cause hazards and loss of warranty claims.

Explanation of Symbols

Danger

This symbol indicates that there are dangers to the life and health of persons due to extremely flammable gas.

Warning of electrical voltage

This symbol indicates that there is a danger to life and health of persons due to voltage.

Warning

The signal word indicates a hazard with a medium level of risk which, if not avoided, may result in death or serious injury.

Caution

The signal word indicates a hazard with a low degree of risk which, if not avoided, may result in minor or moderate injury.

Attention

The signal word indicates important information (e.g. property damage), but not danger.

Observe instructions

This symbol indicates that a service technician should only operate and maintain this appliance in accordance with the operating instructions.

READ AND SAVE THESE INSTRUCTIONS

SAFETY WARNING

• Always place the unit on a smooth, flat, lint-free, non-metallic, waterproof and level surface and keep it away from direct sunlight.
• Always place the unit 2 feet (60 cm) above the floor, 12 inches (30 cm) away from the wall, other appliances or wooden furniture.
• Do not place the unit on carpet, towel or wood surface, which will block the vent and may damage the unit.

SAFETY PRECAUTIONS

• To avoid electric shock, do not use wet hands to plug and unplug the unit.
• Do not start the unit when the water tank is empty.
• Do not add any additives into the water tank that are not produced or supervised by our company.
• Do not put anything except water into the water tank.
• Do not add water through the mist outlet. While the humidifier is operating, do not touch the water inside the unit or any parts submerged in water.
• Do not cover or block the mist outlet, the mist outlet should be kept clear at all times.
• Do not replace the power cord without authorization from an authorized representative.
• Always ensure proper contact between the power cord and outlet.
• Never use this appliance on the same circuit as other appliances.
• Do not place the appliance near a water source.
• Do not disassemble, modify or repair internal parts without authorization from an authorized representative.
• Do not climb or sit on the appliance.
• Do not store appliances near or around flammable items, explosive items or heat sources.
• Do not directly flush the humidifier with water.
• Always use the power button to turn off the humidifier before unplugging the power cord.
• Always use filtered or distilled water and do not use hard water.
• Please do not use a damaged or worn power cord; Do not replace the power cord without authorization. If the power cord is damaged, it must be replaced by the manufacturer, its service department or a professional from a similar department to avoid danger. Power off and unplug the humidifier during thunderstorms.
• During an abnormal phenomenon (like a burnt smell), power off the humidifier and unplug the power cord.
• After a long period of no use, power off the humidifier and unplug the power cord then, clean the water tank according to the “Cleaning and Maintenance” instructions.
• To avoid bacterial growth, consistently change the water in the water tank and base.
• Before moving the appliance, always unplug the power cord.
• If the appliance is tilted when filled with water, be sure to unplug the power cord immediately and send it for inspection.
• The suitable ambient temperature for use of this product: 5°C~40°C, relative humidity: <80% RH (Please use pure water with temperature less than 40°C). A tolerance of ±10%RH is applied to the accuracy of the inner humidity sensor.
• Each sensor has its own variation in accuracy.Therefore, the measurement results of different qualified sensors will be different. Differences in measurement locations can also cause measurement differences.
• Do not run cord under carpeting.
• Do not cover cord with throw rugs, runners or similar coverings.
• Do not route cord under furniture or appliances. Arrange cord away from traffic area and where it will not be tripped over.
• Please note that any changes or modifications of this product not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
• If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
  • Reorient or relocate the receiving antenna.
  • Increase the separation between the equipment and receiver.
  • Connect the equipment into an outlet on a circuit di erent from that to which the receiver is connected.
  • Consult the dealer or an experienced radio/TV technician for help.

SPECIFICATIONS

• Model: MSU16U6DBBC
• Rated Frequency: 60Hz
• Rated Power: 105W
• Water Tank Capacity: 1.6 gallon
• Net Product Weight: 5.07Ibs
• Dimensions: 9.258.0712.80 inch
• Rated Voltage: 120V~

PRODUCT OVERVIEW

Component Name

NOTE

All the pictures in this manual are for explanation purpose only. Any discrepancy between the real object and the illustration in the drawing shall defer to the real product. This humidifier is pre-assembled in factory.

OPERATION INSTRUCTIONS

Description of Display

WARM Light

|

| • Under power-on conditions, it will light up when the WARM function is turned on, and turn off when the WARM function is turned off.

•  It flashes for cleaning reminder.

•  In standby mode, it will be on for 60 seconds by default.

Timer

| | • It is on when the device is turned on and a shut- off timer is set.

AUTO Light

|

| • It is off when the device is turned on and the AUTO function is turned off.

• It is on when the device is turned on and the AUTO function is turned on.

•  In standby mode, it will be on for 60 seconds by default.

% Light

| | • It is on when the device is turned on and a humidity value is detected.

•  In standby mode, it will be on for 60 seconds by default.

Double-8 Light

|

| •  Displays the ambient humidity value and “- -”.

•  Displays the off timer and “H”.

•  Displays humidity level.

•  Displays fault code, software version number.

•  Displays the cleaning reminder mark “CL”.

Control Panel Operations

| Function description
---|---
| | • Tap to power on the humidifier and tap again to power off the humidifier.

|

• Repeatedly tap to cycle between mist level 1, 2, and 3

DIMMER

| • Repeatedly tap to cycle between light colors of red, green, blue,and none.

|

• Repeatedly tap to set a shut-off timer of 0, 1, 2, 4, or 8 hours.

| • When the unit is turned on and the constant humidity function is off, press the button to turn on the ECO humidity function , Press it again to turn off this function.

|

• When the unit is turned on, press this button to turn on the warm mist function, press it again to turn off the function.

NOTE

After power-on, when the product is in standby state, the display icon light “

• • • ” will be on at the same time. If there is no operation within 60 seconds, the display will enter the off-screen state. After power on, you can turn on/off the screen-off function by pressing and holding the key combination “ + ” for 3 seconds. “–” indicates water is flowing from the tank to the base. “P1” indicates shortage of the water,water needs to be added to the tank.

Water Filling (Two Methods)

NOTE

• Please be sure to unplug the power cord before filling water.
• Never fill water tank exceed the MAX indication line(1.6Gal/6L ).
• Do not add water through the mist outlet.
• Never attempt to lift the water tank by the tank cover;
• Please do not add additives like essential oils, perfume, drugs, etc. to the water. But you can add aroma liquid in the built in essential oil tray.
• Please use purified or distilled water below 40°C.

Methods A

1. Take out the water tank.
2. Remove the lid of the tank.
3. Pour cold/warm (no higher than 40°C) distilled or filtered water into the water tank.

NOTE

• Make sure the tank lid is covered on the water tank properly after the water is filled in the tank.
• When installing back to the lower shell, it is necessary to ensure that the two buckle grooves on the water tank and the surface plate are in place.

Methods B

Do not fill the water through the mist outlet

Do not fill the water through the mist chimney

• With the water tank placed on the base, remove the lid of the tank and pour purified or distilled water into the tank.
• Ensure that you do not exceed the maximum capacity of 1.6 gallon/6L.

Installation of the Water Tank

• Make sure the base is placed on a level surface. When placing the water tank on the base, make sure to slide the water tank slots onto the hooks located on the front panel. Ensure that the tank cover is aligned and sits flush with the water tank when placed correctly.

Mist Direction Adjustment

• The mist outlet can be rotated by 360°, which can be adjusted according to your own needs

Essential Oil Tray Use

• Remove the essential oil tray cap, add a drop of essential oil in the tray and then put back the cap and then cover it.

CLEANING AND MAINTENANCE

Please be sure to unplug the power cord before cleaning.

• Please be sure to remove scale and debris in the humidifier tank regularly and it is recommended to clean it once every 3 days.
• Must clean scale and debris of heating plate and atomizing plate in sink regularly (336 hours in total).

1. Remove the Water Tank Assembly.
2. Remove the Hot Plate Cover (Pull up to remove it).
3. Mix cleaning solution (½ tablespoon white vinegar and 1 cup water).
4. Pour the cleaning solution onto the Atomizer and Hot Plate.
5. Wait for 30 minutes.
6. Pour the cleaning solution into the sink drain.
7. Pour 1 cup of water onto Atomizer and Hot Plate.
8. Pour water into a sink drain.
9. Re-install the Hot Plate Cover (press into place).
10. Re-install the Water Tank Assembly.
11. Long Press “WARM” button for 3 seconds to reset the appliance.

• The product must be cleaned regularly to maintain good performance.

NOTE

Please be sure to unplug the power cord before cleaning.It is recommended to clean scale and debris in the water tank and base at least every 3 days.

Water Tank Exterior

Wipe the exterior with a soft damp cloth and allow to dry before use.

Water Tank Interior

Use a mild detergent and water solution on a soft cloth to scrub the interior of the tank.Rinse the tank and dry thoroughly
before use.

Rotate the filter cover clockwise and pull to remove it. Then, remove the filter sponge from the filter cover and rinse both with water. Do not forget to place the filter sponge back in filter cover, place in the water tank and rotate it counter-clockwise to re-attach to the water tank.

Hot Plate And Atomizer

When cleaning the lower shell, take out the gland first, and then add detergent or calen water.

Rinse after cleaning

Warning : Do not let water goes into the product when flushing, otherwise there is a risk of electric shock.

TROUBLESHOOTING

The humidifier does not work.

| ● The plug may not be fully inserted.| Check whether the plug is properly inserted into the

outlet.

● There is no water in the water tank.| Add water to the tank.
● The water tank is not in place.| Make sure the tank is in place.
Mist has a bad odor.| ● The water tank, or base is not clean.| Refill clean water, or clean the water tank and water tray.
Humidifier is emitting a white dust/residue.| ● Use tap water with a high mineral content, aka “hard water.”| Clean the tank and the base, and use only demineralized or distilled water.
There is abnormal noise.| ● The appliance is not in place, tilted or unstable.| Make sure that the unit is placed on a solid, flat surface.
The water tank shows water shortage, but is filled with water; the humidifier does not work for a long time.| ● Excessively tilting the unit at an angle causes the water level in the water tank to be judged as low water level, so the unit automatically starts protection mode and stops.| Make sure the unit is put on a
flat and firm place, and kept steady.

The appliances may encounter some errors and malfunctions, the following tables contain possible causes and notes for resolving an error or malfunction.

TRADEMARKS

TRADEMARKS, COPYRIGHTS, AND LEGAL STATEMENT

logo, word marks, trade name, trade dress, and all versions thereof are trademarks, copyrights, and other intellectual property rights, and all goodwill-derived valuable assets of Midea Group and/or its affiliates (“Midea”), to which Midea owns from using any part of a Midea trademark. Use of the Midea trademark for commercial purposes without the prior written consent of Midea may constitute trademark infringement or unfair competition in violation of relevant laws. This manual is created by Midea and Midea reserves all copyrights thereof. No entity or individual may use, duplicate, modify, distribute in whole or in part this manual, or bundle or sell with other products without the prior written consent of Midea. All the described functions and instructions were up to date at the time of printing this manual. However, the actual product may vary due to improved functions and designs.

DATA PROTECTION NOTICE

For the provision of the services agreed with the customer, we agree to comply without restriction with all stipulations of applicable data protection law, in line with agreed countries within which services to the customer will be delivered, as well as, where applicable, the EU General Data Protection Regulation (GDPR). Generally, our data processing is to fulfil our obligation under contract with you and for product safety reasons, to safeguard your rights in connection with warranty and product registration questions. In some cases, but only if appropriate data protection is ensured, personal data might be transferred to recipients located outside of the European Economic Area.

Further information is provided by request. You can contact our Data Protection Officer via MideaDPO@midea.com. To exercise your rights, such as your right to refrain your personal data being processed for marketing purposes, please contact us via MideaDPO@midea.com.

To find further information, please follow the QR Code.www.midea.com

© Midea 2022 all rights reserved

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>