eIoT ZR01 SMART RING User Manual

eIoT ZR01 SMART RING

Product Information

Specifications

• Product Name : Smart Ring
• Bluetooth Version : LE 5.0
• Water Resistance : 5ATM
• Battery Life : 4-6 days

Product Usage Instructions

Charging
To charge your Smart Ring, follow these steps:

1. Connect the provided charging cable to the charging port located on the back of the ring.
2. Plug the other end of the cable into a power source such as a USB port or wall adapter.
3. Ensure that the charging cable is securely connected.
4. The LED indicator on the ring will light up during charging and turn off when fully charged.

Pairing with a Mobile Device
To pair your Smart Ring with a mobile device, please follow these instructions:

1. Download and install the Smart Ring app from your device’s app store.
2. Enable Bluetooth on your mobile device.
3. Open the Smart Ring app and follow the on-screen instructions to complete the pairing process.
4. Once paired, you can customize settings and access features through the app.

Using SOS Feature
The Smart Ring includes an SOS feature for emergencies. To use this feature, follow these steps:

1. In case of an emergency, press and hold the SOS button on the ring for at least 3 seconds.
2. The ring will vibrate to confirm that the SOS signal has been sent.
3. The SOS signal will be transmitted to your paired mobile device, and the designated emergency contacts will be notified.

Frequently Asked Questions (FAQ)

• Q: How long does the battery last on the Smart Ring?
• A: The battery life of the Smart Ring is approximately 4-6 days depending on usage.
• Q: Can I wear the Smart Ring while swimming?
• A: Yes, the Smart Ring is water-resistant up to 5ATM, which means you can wear it while swimming or showering.
• Q: How do I update the firmware of my Smart Ring?
• A: To update the firmware of your Smart Ring, please refer to the instructions provided in the Smart Ring app.

FUNCTION INTRODUCTION

• SLEEP
  Scientific monitoring sleep data. Effectively help to improve sleep quality.

• BODY TEMPERATURE
  Body temperature monitoring and analysis. Scientific management of physical status.

• BLOOD OXYGEN
  Periodic monitoring and analysis of blood oxygen. One key to the detection of blood oxygen.

• HEART RATE
  Resting heart rate and motional heart rate. Periodic monitoring

• RECOVERY
  Care of various body indicators. Provide body recovery reports.

• WOMEN MENSTRUAL CYCLE
  Al deep learning, the scientific expectation for pregnancy.

• SOS
  In case of emergency. One-key SOS for resecue.

• TOUCH TO CONTROL
  Easy and smart touch control the scores roscoentel smart life experience.

• STRICTLY WATERPROOF
  Strictly waterproof performance. Enjoy the fun of sports

PACKING LIST

• Smart Ring*1
• Charging Dock*1
• Manual*1

BASIC PARAMETERS

• Model Name: Smart Health Ring
• Product material: ceramics, stainless steel
• Communication method:  Bluetooth LE5.0
• Sensor: Body temperature sensor, acceleration sensor, heart rate sensor, touch sensor
• Battery life: 4-6 days
• Battery: Lithium polymer battery
• Charging method: magnetic charging
• Charging time: ≤1.5hrs
• Operating temperature: -20℃ to 50℃
• Storage temperature: -30℃ to 70℃
• Charging temperature: 0℃ to 40℃

CONNECTIONS

1. Scan the QR code to download the APP (or search for “AIZO RING” in the Apple Store or Google Market to download)
2. Place the ring on the charging dock connected to the power source and the ring will be activated automatically. (the 1st time you bind the ring, you need to put it on the charging dock and keep it charged. ）
3. Open the “AIZO RING” APP, Click the Add Ring button on the status window or smart window to enter the ring binding interface and search for the ring.
4. When the ring appears in the Bluetooth list, choose it to start binding; If not found, check whether the charging dock connection and the ring are charged.
5. Wait for seconds, the APP will automatically connect and bind the ring. During binding, the ring will flash green LED light for 1-2 seconds.
6. If you need to unbind it, click “Unbind Ring” on the settings window of the APP to finish unbinding. If you’re using an iPhone, you’ll also need to manually remove or ignore your ring from the list of paired Bluetooth devices in your phone’s Bluetooth setting.

WEARING

When using the Smart Touch feature, please pay attention to the way the ring is worn. The ring should be worn on the index finger and the sensor area located on the inside of the finger (note: the touch experience will be more comfortable when the upper end of the touch logo is aligned with the middle line on the side of the index finger, as shown in the dotted line below)

USE

After the smart touch function is enabled, you can touch to control the 3rd parties APPs on phones, tablet PCs, computers and TVs through the ring touch area (the touch area is on the outer surface of the ring, please pay attention to the direction when wearing)

CHARGING

1. Connect the charging Dock with the USB adapter, then put the ring on the charging Dock as shown in the picture, if the ring’s red light flashes 1 second apart, it means that the ring is charging.
2. If fully charged, the ring will flashing green. (the charging connection is correct, the red light will continue to light for 10 seconds, if it is not connected correctly, the red light will turn off immediately, please check the charging connection. After connecting the charge for 10 seconds, flash a red light or green light every 1 second to indicate the charging status,flashing red light means in charging, flashing green light means fully charged.)

CONTENT OF HARMFUL SUBSTANCES

Part name

| Hazardous substances
---|---
(Pb)| （Hg）| （Cd）| (Cr(VI))| (PBB)| (PBDE)
Charging Dock| | | | | |
Housing| | | | | |
Circuit board| | | | | |
Battery| | | | | |

This form is prepared by SJ/T11364. indicates that the content of the hazardous substance in all homogeneous materials of the component is below the limit specified in GB/T26572-2011 . indicates that the content of the hazardous substance in at least one homogeneous material of the component exceeds the provisions of GB/T 26572-2011

• The number in this sign indicates that the product (except the battery) is in normal use and the environmental protection service life is 10 years
• The number in this sign indicates that the environmental protection service life of the battery is 5 years under normal use

The environmental protection service life identification on the components takes precedence over any conflicting or different environmental protection service life identification on the products. All environmental protection service life of the product refers to the safe life of the product without leakage of toxic and harmful substances when used under the service conditions specified in the product manual.

WARRANTY

Tips：

1. This product in normal use, has a charging dock warranty for six months from the date of purchase.
2. Failure caused by the user’s reasons does not provide a free warranty as follows:
   • Crash since the disassembly, modification, etc. ;
   • By inadvertent drops during use.
   • All man-made damage or damage due to third-party negligence, external shock crack, damage to external components of the scratch, etc., are not covered by the warranty.

SPECIAL INSTRUCTIONS

1. This manual is made based on the existing information, and in the principle of continuous improvement and continuous development,  Our company reserves the right to change the product specifications and functions and modify and improve any products described in this manual.
2. The contents of this manual are provided according to the condition of the product at the time of manufacture. Unless otherwise specified by applicable laws, no explicit or default warranty of any kind is made for the accuracy, reliability and content of the document. Any claim based on the data, drawing or text description of this manual will not be accepted.
3. This product is not a medical device. The data and information provided are for reference only.
4. If the outer frame of this product is removed without authorization, the product will lose its warranty qualification.
5. The pictures in this manual are used to guide the user and are for reference only. Please refer to the actual object for details.

WARRANTY CARD

User information

Full Name

Contact No.
Address
Email
Post code

Fuselage Information

• SN number of device

Maintenance record

• Manufacturer’s Name: Huizhou Jiashang Electronic Technology Co., LTD Product name: Health Smart Ring
• Trade Mark: N/A
• Model number : ZR01
• Operating Temperature: 0° C to 40° C

This device in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. All essential radio test suites have been carried out.

• Function: BT
• Operation Frequency:  2402-2480MHz
• Modulation:  GFSK
• Max RF Output: -0.82dBm

The host manufacturer has the responsibility that the host device should be in compliance with all essential requirements of RED. This restriction will be applied in all member states. The simplified EU declaration of conformity referred to in Article 10(10) shall be provided as follows: Hereby. Advanced Technologies SRL declares that the radio equipment type Tablet PC is in compliance with Directive 2014/53/EU. The full text of the EU Declaration of Conformity is available at the following internet address: www.nst- it.com.

Use carefully with the earphone maybe possible excessive sound pressure from earphones and headphones can cause hearing loss.  This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. this device may not cause harmful interference, and
2. this device must accept any interference received, including interference that may cause undesired operation.

Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, under Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used by the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.

If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and the receiver.
• Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device has been evaluated to meet general RF exposure requirements. The device can be used in portable exposure conditions without restriction.

References

• Shenzhen NST Industrial & Trade Co.,Ltd.
• Shenzhen NST Industrial & Trade Co.,Ltd.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>