GAGGENAU VG491215AU Vario Gas Cooktop Owner’s Manual
- June 16, 2024
- Gaggenau
Table of Contents
Owner’s Manual
VG491215AU Vario Gas Cooktop
Color Variants
VG491215AU Stainless steel Width 90 cm
Optional accessories
WP400001 Wok pan made of multiple-layer material
Installation Accessories
VA420004 Connection strip for combination with other Vario appliances of the
400 series for flush mounting
VA420010 Connection strip for combination with other Vario appliances of the
400 series for surface mounting
VG491215AU Vario gas cooktop 400 series Stainless steel Width 90 cm Natural
gas 10 mbar
Performance
Five multi-ring burners, up to 17 kW Full electronic power level regulation on
12 levels
Solid stainless steel knob, also selectable with black robust finishing, for
precise control and personalization.
Knobs to be purchased separately. Precision crafting of 3 mm stainless steel
For surface mounting with a visible edge or for flush mounting Precise and
reproducible flame size Automatic fast ignition, electronic flame monitoring
with automatic re-ignition Simmer function for cooking on a very low output
level
Solid smooth-surface cast iron pan supports Can be combined perfectly with
other Vario appliances of the 400 serie
Cooking zones
1 multi-ring wok burner (300 W 5000 W), suitable for pots up to max. ø 32
cm.
2 two-ring high output burners (160 W 4000 W), suitable for pots up to max.
ø 28 cm.
2 two-ring standard burners (160 W 2000 W), suitable for pots up to max. ø
24 cm.
Capacity
Control knobs with illuminated ring, cooking zone and output level markings. One-handed operation. Full electronic control in 12 output levels for exact power level regulation plus simmer function. Automatic fast ignition.
Features
Simmer function.
Three-part cast iron pan support with flat, continuous pot surface.
Brass burner rings. Safety Electronic flame monitoring with automatic re-
ignition. Residual heat indication.
Safety shut-off.
Connection
Depending on the type of installation (surface-mounted or flush-mounted, with
or without an appliance cover), the specific location of the cut-out and the
knob positions may vary. The horizontal positioning of the knobs may be
aligned with the specific burners.
The drawing “Installation of the control knob” must be observed if the panel
is more than 23 mm thick (there must be a recess at the rear). If combining
several Vario appliances of the 400 series, a connection strip VA 420 must be
placed between the appliances.
Depending on the type of installation, the corresponding connection strip must
be provided. The bearing capacity and stability, in the case of thin worktops
in particular, must be supported using suitable substructures. Take into
account the appliance weight and additional loads. Additional instructions for
flush mounting:
Characteristics
Product name/family gas hob w integrated controls
Built-in / Free-standing Built-in
Energy input Gas
Total number of positions that can be used at the same time 5
Min. required niche size for installation (HxWxD) 141 x 887 x 492
Width of the appliance 908
Dimensions 30 x 908 x 520
Dimensions of the packed product (HxWxD) 300 x 700 x 1010
Net weight 29.3
Gross weight 32.1
Residual heat indicator without
Location of control panel External control
Basic surface material brushed stainless steel
Color of surface Stainless steel, Stainless steel
Color of frame Stainless steel, Stainless steel
Length electrical supply cord 140.0
EAN code 4242006306038
Gas connection rating 17000
Fuse protection 2
Voltage 220-240
Frequency 50; 60
Included accessories Consumption and connection features
Installation is possible in worktops made of stone, synthetics or solid wood.
Heat resistance and watertight sealing of the cut edges must be observed.
Concerning other materials please consult the worktop manufacturer.
The groove must be continuous and even, so that uniform placing of the
appliance on the gasket is ensured. Do not use discontinuous lining.
The joint width may vary due to size tolerances of the combinations and of the
worktop cut-out.
If installing several appliances in individual cut-outs allow for a division
bar of minimum 50 mm between the individual cut-outs.
Plan for an electrical connection (the appliance is not operable without power
supply). Air intake from above.
No intermediate shelf required. Rear panel and wall trims must be heat-
resistant and consist of a nonflammable material.
A minimum lateral clearance of at least 300 mm from adjacent heat-sensitive
furniture or contact surfaces must be observed or thermal insulation fitted.
Installation in a 90 cm wide lower cabinet is required.
With a total connected load of more than 11 kW local regulations concerning
room ventilation, room size and combination of extraction or recirculation
hoods must be observed. Minimum clearance between gas cooktop(s) with more
than 11 kW and ventilation hood 70 cm.
The combination with VL 414 is not recommended, since the air extraction from
the centre burner cannot be guaranteed due to the distance.
Appliance can be snapped into the worktop from above.
Appliance weight: approx. 29. kg
Total connected load gas 17.0 KW.
Total connected load electric 15.0 W.
Connecting cable 1.4 m with plug.
VG491215AU
Vario gas cooktop 400 series
Stainless steel
Width 90 cm
Natural gas 10 mbar
VG491215AU
Vario gas cooktop 400 series
Stainless steel
Width 90 cm
Natural gas 10 mbar
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>