Jackson WWS HT-E-SEER Delta Series Glasswasher Dishmachines Instruction Manual

: June 16, 2024
: Jackson WWS

HT-E-SEER Delta Series Glasswasher Dishmachines

Product Information

Delta Series Glasswasher Dishmachines

The Delta Series Glasswasher Dishmachines are high-quality
dishwashers designed for commercial use. They are manufactured by
Jackson, a trusted brand in the industry. These dishmachines are
built with durable components and advanced features to ensure
efficient and effective dishwashing.

Manufacturer’s Limited Warranty

The Delta Series Glasswasher Dishmachines come with a one-year
limited parts and labor warranty. This warranty is applicable only
in the United States and Canada. To register your warranty, visit
www.jacksonwws-warranty.com or call 1-888-800-5672. Failure to
register the Dishmachine will void the warranty.

Travel Limitations

Jackson limits warranty travel time to the customer site within
50 miles of the Jackson authorized service agent’s office and
during regular business hours. Jackson will not pay for travel time
and mileage that exceeds these limits, or any fees such as those
for air or boat travel without prior authorization.

Replacement Parts Warranty

Jackson provides a warranty for replacement parts. Please refer
to the manufacturer’s limited warranty for more details.

Product Changes

Jackson reserves the right to make changes in design and
specification of any component of the Dishmachine as engineering or
necessity requires.

Disclaimer of Warranties

There are no warranties, expressed or implied, including,
without limitation, any implied warranty of fitness for a
particular purpose or merchantability, that are not set forth
herein, or that extend beyond the duration hereof.

Limitation of Remedies and Liabilities

Your sole and exclusive remedy under this limited warranty shall
be product repair or replacement as provided herein. Under no
circumstances will Jackson be liable for any incidental or
consequential damages, or for damages in the nature of penalties.
Jackson’s liability on any claim of any kind with respect to the
goods or services covered hereunder shall in no case exceed the
price of the goods or services or part thereof which gives rise to
the claim.

Items Not Covered

Please refer to the manufacturer’s limited warranty for a
detailed list of items not covered under warranty.

Product Usage Instructions

Installation

1. Choose a suitable location for the Delta Series Glasswasher
Dishmachine, ensuring that it is close to necessary utilities such
as water supply and drainage. 2. Ensure that the power supply meets
the electrical requirements specified in the user manual. 3. Follow
the dimensional drawings provided in the manual to determine the
exact dimensions and clearances required for installation. 4.
Connect the water supply and drainage lines according to the
instructions provided. 5. Plug in the power cord to a grounded
outlet.

Operation

1. Familiarize yourself with the control panel and buttons on
the Dishmachine. 2. Ensure that the water supply is turned on and
that there is sufficient detergent and rinse aid in their
respective compartments. 3. Load the dishes and glassware into the
racks, ensuring proper placement and spacing. 4. Close the
dishwasher door securely. 5. Select the desired wash cycle and
options using the control panel. 6. Press the Start button to
initiate the washing process. 7. Monitor the progress of the wash
cycle and ensure that it completes successfully. 8. Once the cycle
is complete, open the dishwasher door and remove the clean dishes
and glassware. 9. Empty and clean the debris filter regularly to
maintain optimal performance.

Service and Maintenance

1. Regularly inspect the Dishmachine for any signs of damage or
wear. 2. Clean the interior and exterior surfaces of the
Dishmachine using a mild detergent and a soft cloth. 3. Check and
clean the spray arms to ensure proper water distribution during the
wash cycle. 4. Inspect the seals and gaskets for any signs of
deterioration and replace them if necessary. 5. Schedule regular
maintenance checks with an authorized service agent to keep the
Dishmachine in optimal working condition.

Specifications

Manufacturer: Jackson
Model: Delta Series Glasswasher Dishmachines
Warranty: One-year limited parts and labor warranty (applicable
only in the United States and Canada)

Frequently Asked Questions

Q: Where can I register my warranty?

A: You can register your warranty by visiting
www.jacksonwws-warranty.com or calling 1-888-800-5672.

Q: What should I do if my Dishmachine requires service beyond

the warranty travel limitations?

A: If your Dishmachine requires service beyond the warranty
travel limitations, contact Jackson’s authorized service agent for
further assistance. Additional fees may apply.

Q: Can I use the Dishmachine outside of the United States and

Canada?

A: The warranty for the Delta Series Glasswasher Dishmachines is
applicable only in the United States and Canada. Usage outside of
these regions may void the warranty.

Q: How often should I clean the debris filter?

A: It is recommended to clean the debris filter regularly,
ideally after each use, to maintain optimal performance.

DELTA® HT-E-SEER

INSTALLATION, OPERATION, AND SERVICE MANUAL
DELTA SERIES GLASSWASHER DISHMACHINES
Delta HT-E-SEER Manual · 07610-004-54-86-M

MANUFACTURER’S LIMITED WARRANTY (APPLICABLE ONLY IN THE UNITED STATES AND CANADA)
WARRANTY REGISTRATION:
To register your Jackson Dishmachine’s warranty go to www.jacksonwws- warranty.com or call 1-888-800-5672. Failure to register the Dishmachine will void the warranty.
ONE YEAR LIMITED PARTS AND LABOR WARRANTY
For a period of one (1) year from date of original installation of a new Jackson Dishmachine (but in no event to exceed eighteen (18) months from date of shipment from Jackson’s factory), Jackson WWS, Inc. (Jackson) will repair or replace, at its discretion, any original part that proves defective in materials or workmanship at the time the Dishmachine was purchased; provided that (i) the Dishmachine has not been altered, (ii) the Dishmachine has been properly installed, maintained, and operated under normal use conditions and in accordance with the applicable installation, operation and service manual available on the Jackson website, and (iii) a warranty claim is reported to a Jackson Authorized Service Agency within the warranty period. This warranty includes replacement with Jackson specified genuine replacement parts, purchased directly from a Jackson Authorized Parts Distributor or Service Agency. Use of generic replacement parts may create a hazard and shall void this warranty.
THIS WARRANTY DOES NOT APPLY OUTSIDE THE UNITED STATES AND CANADA.
Jackson will pay the labor to repair or replace a defective original part as a part of the warranty, provided that a Jackson Authorized Service Agency performs the labor. Any repair or replacement work by anyone other than a Jackson Authorized Service Agency is the sole responsibility of the purchaser. Labor coverage is limited to regular hourly rates; Jackson will not pay overtime premiums or emergency service charges. Accessory components (such as table limit switches, pressure regulators, and drain water tempering kits) that are not installed by Jackson at the factory and are shipped with the Dishmachine carry only a (1) one-year parts warranty. Labor to repair or replace these components is not included in the warranty or covered by Jackson. Booster heaters not manufactured by Jackson are not covered by this warranty but are warranted by their respective manufacturers. This warranty is void if any defect or failure is a direct result from shipping, handling, fire, water, accident, alteration, modification, misuse, abuse, flood, acts of God, burglary, casualty, attempted repair by unauthorized persons, use of replacement parts not authorized by Jackson, improper installation, installation not in accordance with local electrical and plumbing codes, if the serial number has been removed or altered, if the Dishmachine is used for any purpose other than originally intended, or if the equipment is installed for residential use. Jackson does not authorize any other entity or person, including, without limitation, any entity or person who deals in Jackson Dishmachines, to change this warranty or create any other obligation in connection with Jackson Dishmachines.
TRAVEL LIMITATIONS:
Jackson limits warranty travel time to the customer site within 50 miles of the Jackson authorized service agent’s office and during regular business hours. Jackson will not pay for travel time and mileage that exceeds these limits, or any fees such as those for air or boat travel without prior authorization.
REPLACEMENT PARTS WARRANTY:
For a period of (90) ninety days from the date of installation by a Jackson Authorized Service Agency (but in no event to exceed (180) one-hundred-eighty days from the date of purchase from a Jackson Authorized Parts Distributor or Service Agency), Jackson will repair or replace, at its discretion, any Jackson genuine replacement parts that prove defective in materials or workmanship at the time the replacement parts were installed. This warranty does not include paying the labor to repair or replace the replacement part. This warranty is subject to all conditions, exclusions and limitations applicable to the Dishmachine.

MANUFACTURER’S LIMITED WARRANTY (CONT.) (APPLICABLE ONLY IN THE UNITED STATES AND CANADA)
PRODUCT CHANGES:
Jackson reserves the right to make changes in design and specification of any component of the Dishmachine as engineering or necessity requires.
DISCLAIMER OF WARRANTIES:
THERE ARE NO WARRANTIES, EXPRESSED OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY IMPLIED WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE OR MERCHANTABILITY, THAT ARE NOT SET FORTH HEREIN, OR THAT EXTEND BEYOND THE DURATION HEREOF.
LIMITATION OF REMEDIES AND LIABILITIES:
YOUR SOLE AND EXCLUSIVE REMEDY UNDER THIS LIMITED WARRANTY SHALL BE PRODUCT REPAIR OR REPLACEMENT AS PROVIDED HEREIN.
UNDER NO CIRCUMSTANCES WILL JACKSON BE LIABLE FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES, OR FOR DAMAGES IN THE NATURE OF PENALTIES. JACKSON’S LIABILITY ON ANY CLAIM OF ANY KIND WITH RESPECT TO THE GOODS OR SERVICES COVERED HEREUNDER SHALL IN NO CASE EXCEED THE PRICE OF THE GOODS OR SERVICES OR PART THEREOF WHICH GIVES RISE TO THE CLAIM.
ITEMS NOT COVERED:
THIS WARRANTY DOES NOT COVER (1) ADJUSTMENTS INCLUDING, BUT NOT LIMITED TO, TIMER CAMS, THERMOSTATS, DOORS, TANK HEATER ADJUSTMENTS OR CLUTCHES; (2) AIR FREIGHT OR OVERNIGHT FREIGHT; (3) ANY AMOUNT EXCEEDING ORIGINAL PURCHASE PRICE; (4) CLEANING OF DRAIN VALVES, GAS LINES, RINSE/WASH NOZZLES, STRAINERS, SCREENS, OR SPRAY PIPES; (5) CLEANING OR DELIMING OF THE DISHMACHINE OR ANY COMPONENT INCLUDING, BUT NOT LIMITED TO, WASH ARMS, RINSE ARMS AND STRAINERS; (6) CONDITIONS CAUSED BY THE USE OF INCORRECT (NON-COMMERCIAL) GRADE DETERGENTS; (7) CORROSION FROM CHEMICALS DISPENSED IN EXCESS OF RECOMMENDED CONCENTRATIONS; (8) COSMETIC DAMAGE, INCLUDING BUT NOT LIMITED TO, SCRATCHES, DENTS, CHIPS, AND OTHER DAMAGE TO THE DISHMACHINE FINISHES, UNLESS SUCH DAMAGE RESULTS FROM DEFECTS IN MATERIALS AND WORKMANSHIP AND IS REPORTED TO JACKSON WITHIN (30) THIRTY DAYS FROM THE DATE OF INSTALLATION; (9) DAMAGE CAUSED BY LABOR DISPUTE; (10) DAMAGES RESULTING FROM IMPROPER CONNECTION TO UTILITY SERVICE; (11) DAMAGES RESULTING FROM WATER CONDITIONS, INADEQUATE OR EXCESSIVE WATER PRESSURE, ACCIDENTS, ALTERATIONS, IMPROPER USE, ABUSE, HANDLING, OVERLOADS, TAMPERING, IMPROPER INSTALLATION OR FAILURE TO FOLLOW MAINTENANCE AND OPERATING PROCEDURES; (12) DISCOLORATION, RUST OR OXIDATION OF SURFACES RESULTING FROM CAUSTIC OR CORROSIVE ENVIRONMENTS, INCLUDING, BUT NOT LIMITED TO, HIGH SALT CONCENTRATIONS, HIGH MOISTURE OR HUMIDITY, OR EXPOSURE TO CHEMICALS; (13) ELECTRIC BOOSTERS, FEED LINES, FLEX HOSE, FUSES, GARBAGE DISPOSALS, OR GAS PILOTS; (14) EXCESSIVE LIME, MINERAL, OR ALKALINE BUILDUP; (15) EXPENSES DUE TO DISCONNECTION, DELIVERY, RETURN AND REINSTALLATION; (16) FAILURE OF ELECTRICAL COMPONENTS DUE TO CONNECTION OF CHEMICAL DISPENSING EQUIPMENT INSTALLED BY OTHERS; (17) FAILURE OF FACILITY WATER HEATER TO MAKE TEMPERATURE; (18) FAILURE TO MAINTAIN WATER HARDNESS LOWER THAN 3.0 GRAINS, PH BETWEEN 7.0 AND 8.5 AND TOTAL DISSOLVED SOLIDS BELOW 250 PPM; (19) FAILURE TO COMPLY WITH LOCAL ELECTRICAL BUILDING CODES; (20) LEAKS OR DAMAGE RESULTING FROM SUCH LEAKS CAUSED BY THE INSTALLER, INCLUDING THOSE AT MACHINE TABLE CONNECTIONS, OR BY CONNECTION OF CHEMICAL DISPENSING EQUIPMENT INSTALLED BY OTHERS; (21) OPENING OR CLOSING OF UTILITY SUPPLY VALVES OR SWITCHING OF ELECTRICAL SUPPLY CURRENT; (22) PERFORMANCE OF REGULAR MAINTENANCE AND CLEANING AS OUTLINED IN THE OPERATOR’S GUIDE; (23) REMOVAL OR REINSTALLATION OF INACCESSIBLE DISHMACHINES OR BUILT-IN FIXTURES THAT INTERFERE WITH SERVICING, REMOVAL OR REPLACEMENT OF THE DISHMACHINE; (24) REPLACEMENT WEAR ITEMS INCLUDING, BUT NOT LIMITED TO, CURTAINS, DRAIN BALLS, DOOR GUIDES, GASKETS, O-RINGS, SEALS, SQUEEZE TUBES, AND BEARINGS; (25) RESIDENTIAL USE; (26) USE WITH UTILITY SERVICE OTHER THAN THAT DESIGNATED ON THE RATING PLATE.

REVISION HISTORY

Revision A
B
C D E F G H J K L M

Date 5-25-18
2-25-19
4-24-19 6-17-20 11-18-20 2-6-21 7-13-21 12-22-21 5-5-22 6-17-22 7-8-22 12-2-22

Made by JH
JH
JH JH JH JH JH JH JH JH JH JH

Process 8566 8585 8619 8630 8648 8682 19-553 8664 8709
N/A
8810
8808 20-931
N/A
22-1201 22-1202
8888
N/A 8901 22-1445 22-1503

Details
Initial release of the manual.
Updated pgs. 23. Added note about hot water heaters to pg. 6. Updated references to adjustable outputs on pg. 11. Added programming instructions and fault codes to pgs. 2125. Updated pg. 29 to show panel and membrane together. Corrected P/N of item #20 on pg. 38. Updated pg. 40. Updated SEER System, pgs. 47-48. Updated drain water tempering kit and added link to instructions on pg. 51. Updated schematic.
Updated schematic.
Revised Programming Chemical Feeder Pumps section. Updated Chemical Feeder Pumps parts pages. Added wash heater gasket to pg. 51. Updated SEER System pages.
Revised drain line size. Updated dimensional drawings. Added F12 in Fault Codes section. Adjusted quantities and added door spring on pg. 38. Updated Item #3 on pg. 41.
Changed Priming Chemical Feeder Pumps section. Added spacer and updated blower wheel P/N on SEER System pages.
Updated Fault Codes section. Changed pressure regulator on SEER unit. Updated rinse plumbing assembly.
Updated water consumption per Energy Star 3.0 report. Revised Electrical Requirements section. Added description of Energy Saver Mode.
Removed water hardness test strip. Updated Chemical Feeder Pumps section with black dot roller and corrected squeeze tube P/Ns. Corrected Rinse Tank section to show plumbing. Added gasket to SEER System page.
Removed universal timer. New electrical panel, chemical feeder pumps, and door interlock. Updated schematic.
Changed program number in Programming section.
Updated inlet plumbing hose. Changed chemical tubing. Updated peri-pumps to black components. Added door handle bolts and washers. Updated schematic.

NOMENCLATURE

Delta HT-E-SEER-S
Short Stand
Glasswasher dishmachine; high-temperature, hot-water sanitizing, with a booster tank and detergent and rinse-aid chemical feeder pumps.
Equipped with Steam Elimination and Energy Recovery (SEER) system.
6″ stand clearance allows cleaning beneath the machine.
Delta HT-E-SEER-T
Tall Stand
Glasswasher dishmachine; high-temperature, hot-water sanitizing, with a booster tank and detergent and rinse-aid chemical feeder pumps.
Equipped with Steam Elimination and Energy Recovery (SEER) system.
14″ stand allows storage of chemicals under the machine.

The manufacturer provides technical support for all of the dishmachines detailed in this manual. We strongly recommend that you refer to this manual before making a call to our technical support staff. Please have this manual open when you call so that our staff can refer you, if necessary, to the proper page. Technical support is not available on holidays.
Contact technical support toll free at 1-888-800-5672.
Technical support is available for service personnel only.
i

TABLE OF CONTENTS
GUIDES
Symbols………………………………………………………………………………………………………………………….. 1 Abbreviations & Acronyms ………………………………………………………………………………………………… 1
SPECIFICATIONS
Dimensions – SEER-S ………………………………………………………………………………………………………. 2 Dimensions – SEER-T ………………………………………………………………………………………………………. 3 Operating Parameters ………………………………………………………………………………………………………. 4 Electrical Requirements ……………………………………………………………………………………………………. 5
INSTRUCTIONS
Installation Instructions……………………………………………………………………………………………………… 6 Inspection…………………………………………………………………………………………………………. 6 Unpacking ………………………………………………………………………………………………………… 6 Plumbing ………………………………………………………………………………………………………….. 6 Water Supply Connections …………………………………………………………………………………. 6 Pressure Regulator ……………………………………………………………………………………………. 7 Shock Absorber ………………………………………………………………………………………………… 7 Connecting the Drain Line ………………………………………………………………………………….. 7 Plumbing Check………………………………………………………………………………………………… 7 Electrical Power Connections ……………………………………………………………………………… 8 Voltage Check…………………………………………………………………………………………………… 8 Surrounding Area………………………………………………………………………………………………. 8 Temperature Setpoints……………………………………………………………………………………….. 8 Leveling……………………………………………………………………………………………………………. 8 Chemical Connections ……………………………………………………………………………………….. 9 Priming Chemical Feeder Pumps ………………………………………………………………………. 10
Operating Instructions …………………………………………………………………………………………………….. 11 Preparation ………………………………………………………………………………………………………11 Power Up …………………………………………………………………………………………………………11 Filling the Wash Tub ………………………………………………………………………………………….11 Ware Preparation…………………………………………………………………………………………….. 12 Washing a Rack of Ware ………………………………………………………………………………….. 12 Operational Inspection ……………………………………………………………………………………… 14 Shutdown & Cleaning ………………………………………………………………………………………. 14 Deliming …………………………………………………………………………………………………………. 16 Detergent Control…………………………………………………………………………………………….. 17 Energy Saver Mode …………………………………………………………………………………………. 17
ii

TABLE OF CONTENTS
MAINTENANCE
Preventative Maintenance……………………………………………………………………………………………….. 18
TROUBLESHOOTING
Programming…………………………………………………………………………………………………………………. 20 Fault Codes …………………………………………………………………………………………………………………… 22 Troubleshooting……………………………………………………………………………………………………………… 25
PARTS
Terminal Block Box…………………………………………………………………………………………………………. 27 Control Kick Panel………………………………………………………………………………………………………….. 28 Electrical Panel………………………………………………………………………………………………………………. 29 Chemical Feeder Pump Assembly ……………………………………………………………………………………. 31 Chemical Feeder Pumps…………………………………………………………………………………………………. 33 Door……………………………………………………………………………………………………………………………… 34 Door Interlock ………………………………………………………………………………………………………………… 36 Miscellaneous Door Components …………………………………………………………………………………….. 37 Wash & Motor………………………………………………………………………………………………………………… 38 Rinse Manifold……………………………………………………………………………………………………………….. 40 Plumbing ………………………………………………………………………………………………………………………. 41 Rinse Plumbing ……………………………………………………………………………………………………………… 43 Scale Prevention System ………………………………………………………………………………………………… 45 Rinse Tank…………………………………………………………………………………………………………………….. 46 SEER System………………………………………………………………………………………………………………… 48 Tub & Frame………………………………………………………………………………………………………………….. 50 Miscellaneous Parts ……………………………………………………………………………………………………….. 52
SCHEMATICS
208/230 V, 50/60 Hz, 1 Phase …………………………………………………………………………………………. 53
iii

GUIDES
SYMBOLS
! – Risk of Injury to Personnel
WARNING
! – Risk of Damage to Equipment
CAUTION
– Risk of Electrical Shock

– Caustic Chemicals

i – Reference Data Plate
– Lockout Electrical Power

NOTICE – Important Note

– Instructions Hyperlink

ABBREVIATIONS & ACRONYMS
ANSI – American National Standards Institute GHT – Garden Hose Thread GPG – Grains per Gallon GPM – Gallons per Minute HP – Horse Power Hz – Hertz ID – Inside Diameter kW – Kilowatts MCA – Minimum Circuit Ampacity MOP – Maximum Overcurrent Protection NFPA – National Fire Protection Association NPT – National Pipe Thread OD – Outside Diameter PRV – Pressure Regulating Valve PSI – Pounds per Square Inch V – Volts

07610-004-54-86-M

SPECIFICATIONS

DIMENSIONS – SEER-S

07610-004-54-86-M

SPECIFICATIONS

DIMENSIONS – SEER-T

07610-004-54-86-M

SPECIFICATIONS

OPERATING PARAMETERS

Delta HT-E-SEER

Operating Capacity:
Racks per Hour Dishes per Hour Glasses per Hour
Tank Capacity (Gallons):
Wash Tank Rinse Tank

24 (20)* 600 864
3 1.66

NOTICE Always refer to the machine data plate for specific electrical and water

requirements. The material provided on this page is for reference only and

is subject to change without notice.

Cycle Times (Seconds):

Normal Wash 80 Rinse 9 Dwell 11 SEER 45 Total 145

Heavy Wash 148 Rinse 9 Dwell 11 SEER 45 Total 213

Extra Heavy Wash 248 Rinse 9 Dwell 11 SEER 45 Total 313

Water Temperatures (°F):

Minimum Wash Temperature

155

Minimum Rinse Temperature

180

Incoming water is from a Minimum Incoming Water Temperature

“cold” water line.

Maximum Incoming Water Temperature

Other Water Requirements:
Water Flow Pressure (PSI) Flow Rate Minimum (GPM) Water Line Size (NPT)
Drain Line Size (NPT)
Gallons per Hour (GPH) Gallons per Rack (GPR)

10 4.0
3/4″ Male GHT Connect to true 1/2″ ID Line
5/8″ ID Connect to MIN 1 1/2″ Drain with Air-gap
14.4 (12.0)** 0.60

07610-004-54-86-M

*Racks per hour calculated with NSF suggested load time of :30 for front-opening dishmachines.
**Gallons per hour calculated with NSF suggested load time of :30 for front- opening dishmachines.
4

SPECIFICATIONS

ELECTRICAL REQUIREMENTS

NOTICE
i
All electrical ratings provided in this manual are for reference only. Always refer to the machine data plate to get exact electrical information for this machine. All electrical work performed on machines should be done in accordance with applicable local, state, territorial, and national codes. Work should only be performed by qualified electricians and authorized service agents.
Amperage loads for motors and heaters are indicated on the machine data plate.
The electrical configurations are as follows:
Available Electrical Characteristics: · 208 V, 60 Hz, Single-phase · 230 V, 60 Hz, Single-phase
Available Wash Motors: · 3/4 HP
Available Wash Tank Heaters: · 3.3 kW (208 V)/4.0 kW (230 V)
Available Rinse Tank Heaters: · 4.1 kW (208 V)/5.2 kW (230 V)

Delta HT-E-SEER Electrical Characteristics
VOLTS 208 230

PHASE 1

FREQ 60

WASH MOTOR AMPS

6.6 A

WASH HEATER 15.7 A
AMPS

RINSE HEATER 19.7 A
AMPS

6.6 A 17.4 A 22.6 A

TOTAL LOAD

26.3 A 29.2 A

MCA 27.9 A 30.8 A

MOP 30 A 35 A

*The Delta® HT-E-SEER is designed so heaters never run simultaneously. Total Load is based on higher of the two loads.

07610-004-54-86-M

INSTALLATION

INSTRUCTIONS

INSPECTION Before installing the machine, check packaging and machine for damage. Damaged
packaging might be an indication of damage to the machine. If there is any type of

Do not throw away packaging if damage is
evident!

damage to both packaging and unit, do not throw away the packaging. The machine has been inspected at the factory before shipping and is expected to arrive in new, undamaged condition. However, rough handling by carriers or others might result in damage to the machine while in transit. If this occurs, do not return the machine to

the manufacturer. Instead, contact the carrier and ask them to send a representative

to the site to inspect the damage and request that an inspection report be completed.

Contact the carrier within 48 hours of receiving the machine as well as the dealer that sold you the machine.

UNPACKING The machine should be unpacked and removed from the pallet before installing. Open
the front door and remove all materials from inside. Once unpacked, verify there are no missing parts. If a part is missing, contact the manufacturer immediately.

PLUMBING All plumbing connections must be made to adhere to local, state, territorial, and
national codes. The installing plumber is responsible for ensuring the incoming

The plumber must flush the incoming water line!

water lines are flushed of debris before connecting to the machine. Note that chips and materials from cutting processes can become lodged in the solenoid valves and prevent them from opening or closing. Any valves that are found to be fouled

or defective because of foreign matter left in the water line, and any subsequent

damage, are not the responsibility of the manufacturer.

See the Dimensions page and reference item “B” for water inlet connection location.

NOTICE

The manufacturer does NOT endorse “Tankless On-demand” water heaters for use with their dishmachines. The manufacturer DOES endorse, and highly recommends, the standard “Tank” style water heaters, sized to properly handle the water heating requirements of the facility.

A water hardness test must be performed. If water hardness is higher than 3 GPG and
WATER SUPPLY a water softener is not being used, install the optional Scale Prevention System (SPS) CONNECTIONS: into the water line between the facility water line and the machine water line (installed

WATER HARDNESS at the factory). See the Scale Prevention System page for more information on the HIGHER THAN 3 GPG SPS. Observe proper inlet/outlet water directions. A water shut-off valve should be
installed before installing the SPS to allow access for service. The water supply must

be capable of a minimum of 10 PSI “flow” pressure at the recommended temperature

A water hardness test indicated on the data plate.

must be performed.

Facility Shut-off Adapter
Water Line Valve

SPS

Adapter

Machine Water Line

Example

*Adapters needed will vary.

07610-004-54-86-M

INSTALLATION

INSTRUCTIONS

WATER SUPPLY If water hardness tests at 3 GPG or lower, connect the machine water line (installed

CONNECTIONS:

at the factory) to the facility water line. A water shut-off valve should be installed in the water line between the facility supply and the machine to allow access for service.

WATER HARDNESS The water supply line must be capable of a minimum of 10 PSI “flow” pressure at the

LOWER THAN 3 GPG recommended temperature indicated on the data plate.

PRESSURE The Delta HT-E-SEER has a pressure regulating valve (PRV) installed at the

REGULATOR

factory to accommodate areas where water pressure fluctuates or is higher than the recommended pressure. This machine operates at 10 PSI flow pressure. Take care

Take care not to confuse static pressure with flow pressure!

not to confuse static pressure with flow pressure: static pressure is line pressure in a “no flow” condition (all valves and services are closed); flow pressure is the pressure in the fill line when the valve is opened during the cycle.

SHOCK ABSORBER A shock absober comes standard on the Delta HT-E-SEER. This prevents water
hammer or hydraulic shock–induced by the solenoid valve as it operates–from
causing damage to the equipment.

CONNECTING THE The machine has a pumped (pressure) drain capable of pumping waste water to a

DRAIN LINE

height of 24″ above the machine’s drain pump and is supplied with a drain hose. There must be an air-gap between/around the machine drain hose and the floor drain or

sink. The floor drain or sink must be at least 1.5 times larger than the machine drain

hose. If a grease trap is required by code, it should have a flow capacity of 12 GPM.

24″

Drain Hose

Air-gap

Floor Drain or Sink

PLUMBING CHECK After installing the incoming fill line and drain hose, turn on the water supply to the
machine. Check for any leaks and repair as required. All leaks must be repaired

before operating the machine.

07610-004-54-86-M

INSTALLATION

INSTRUCTIONS

ELECTRICAL POWER Electrical and grounding conductors must comply with the applicable portions of the CONNECTIONS National Electric Code ANSI/NFPA 70 (latest edition) and/or other electrical codes.
The data plate is located on the left-front of the dishmachine. Refer to the data plate for machine operating requirements, machine voltage, total amperage, and serial number.

Disconnect electrical power at the breaker or disconnect switch and tag-out in accordance with procedures and codes.

Remove the rear dress panel and set aside. Remove the terminal block box cover. Install 3/4″ conduit into the hole in the bottom of the terminal block box. Route power wires and connect to terminal block. Install the grounding wire onto the lug provided. “DE-OX” or another similar anti-oxidation agent should be used on all power connections.

L1 N Ground

VOLTAGE CHECK Apply power to machine. Check the incoming power at the terminal block and ensure
it corresponds with the voltage listed on the data plate. If not, contact a qualified

service agency to examine the problem. Do not run the machine if voltage is too

high or too low. Advise all proper personnel of the location of the breaker and any

problems. Replace the terminal block box cover and tighten-down the screws.

SURROUNDING AREA This is a commercial machine and reaches temperatures that can exceed those
generated by a residential machine. Surrounding countertops, cabinets, flooring material, and subflooring material must be designed and/or selected with these higher temperatures in mind.

!
CAUTION

CAUTION! Damage to materials not recommended for higher temperatures will not be covered under warranty or by the manufacturer.

TEMPERATURE The temperature setpoints on this unit have been set at the factory. They should only SETPOINTS be adjusted by an authorized service agent.

07610-004-54-86-M

LEVELING A level machine is important to prevent any damage to the machine during operation
and to ensure the best possible results. The machine comes equipped with adjustable bullet feet which can be turned using a pair of pliers. Since this machine is a glasswasher unit, it should be leveled as close as possible to the unit’s location before it is pushed under the counter or into place.
8

INSTALLATION

INSTRUCTIONS

CHEMICAL This machine is supplied with detergent and rinse-aid pumps and all necessary

CONNECTIONS

tubing. To connect, simply locate the chemical tubes and place the ends (with tube stiffeners) in the appropriate chemical containers (red for detergent and blue for

rinse-aid).

CAUTION

CAUTION! Using deionized water or other aggressive
fluids will result in corrosion and failure of components and will void
the warranty.

Rinse-aid Tube
Stiffener

Rinse-aid Detergent

Enjuague Ayuda Detergente

Abrillantador

Détergent

Detergent Tube
Stiffener

Ensure the detergent tube isn’t extending past the port and into the wash chamber.
!
CAUTION
CAUTION! Detergent tube must not extend past port
into the wash chamber.

Chemical containers can be stored under the machine for the Delta HT-E-SEER-T and nearby for the Delta HT-E-SEER-S. The bottoms of chemical containers cannot be located any higher than 14″ from the floor.

Delta HT-E-SEER-S

Delta HT-E-SEER-T

07610-004-54-86-M

INSTALLATION

INSTRUCTIONS

PRIMING CHEMICAL Chemical feeder pumps need priming when the machine is first installed or if the FEEDER PUMPS chemical lines have been removed and air was allowed to enter.

CAUTION! Water must be in the sump and wash tank before dispensing chemicals.

CAUTION

1. Verify the proper chemical tube stiffener inlet is in the proper container.

NOTICE
Machines with serial numbers before 21A390814 prime
differently. Click here to open manual with old instructions.

2. To prime detergent pump, press and hold I button until display shows timer. Priming cycle defaults to 70 seconds. Observe wash tank during priming cycle. If too much detergent, press I button to stop priming cycle. If not enough, run priming cycle again.

70
DETERGENT PRIME

!
WARNING
WARNING! Some of the chemicals used in
dishwashing may cause chemical burns if they come in contact with skin. Wear protective gear when handling these chemicals.
If any skin comes in contact with these chemicals, immediately follow the instructions provided with the chemicals for treatment.

3. To prime rinse-aid pump, press and hold II button until display shows timer. Priming cycle defaults to 180 seconds.
180
RINSE AID PRIME
4. The amount of detergent might need adjustment depending on water quality and type of detergent. The amount of rinse-aid might need adjustment depending on water hardness and results. Refer to next section for instructions on adjusting amount of chemicals being dispensed.

07610-004-54-86-M

OPERATION

OPERATING INSTRUCTIONS

PREPARATION 1. Verify strainers are in place and clean.

!
CAUTION

CAUTION! The Preparation section must be followed before operating machine!

2. Ensure wash and rinse arms are screwed securely in place and end-caps are tight.

3. Verify wash and rinse arms rotate freely.

4. Confirm chemical levels are correct.
POWER UP To energize the machine, turn on the power at the service breaker. The voltage should
have been previously verified as correct. If not, the voltage must be verified before energizing the machine.
FILLING THE 1. Press the Power button. WASH TUB

07610-004-54-86-M

2. The machine will automatically begin the fill cycle. 3. Once the wash tub is filled, the machine displays “HEATING.” 4. Wait for wash temperature to display at least 155 °F and for the status to display
“READY” before operating the machine.
155 F
READY CYCLE 1
11

OPERATION

OPERATING INSTRUCTIONS

WARE Proper ware preparation helps ensure good results and fewer re-washes. If not done PREPARATION properly, ware might not come out clean and the efficiency of the dishmachine will
be reduced. Scraps should always be removed from ware before being loaded into a rack. Pre-rinsing and pre-soaking are good ideas, especially for silverware and casserole dishes.
Place cups and glasses upside-down in racks so they don’t hold water during the cycle. The machine sanitizes as well as cleans. To do this, ware must be properly prepared before being placed in the machine.

WASHING A RACK 1. Follow the Filling the Wash Tub section, ensuring temperature is at least 155 °F OF WARE and the status displays “READY.”
155 F
READY CYCLE 1

2. Open the door completely. 3. Slide the rack into the machine.

4. Close the door. 5. Choose the cycle (the default is cycle I).

Cycle I is the default cycle.

155 F
READY CYCLE 1

07610-004-54-86-M

Cycle I 145 Seconds Normally-soiled Ware

Cycle II 213 Seconds Heavily-soiled Ware

Cycle III 313 Seconds Extremely-soiled Ware

NOTICE If Cycle II or Cycle III is chosen, the machine will stay in that cycle until another is chosen.
12

OPERATION

OPERATING INSTRUCTIONS

WASHING A RACK 6. Press the Start button and the machine will begin the wash cycle.

OF WARE
Temperature shown is the minimum required
temperature.

155 F
WASHING CYCLE 1

Temperature shown is the minimum required
temperature.

7. After the wash cycle is complete, the machine will automatically enter the rinse cycle.
180 F
RINSING 10 PSI

8. Once the rinse cycle is complete, the machine will automatically enter the sanitize cycle.
SANITIZE CYCLE 1

9. After the sanitize cycle is complete, the machine will automatically enter the venting cycle.
VENTING CYCLE 1

10. After the venting cycle is complete, the machine will automatically go back to being “READY.” Open door and remove rack of ware. To start another cycle, load another rack of ware, close door, and push the Start button.
155 F
READY CYCLE 1

07610-004-54-86-M

OPERATION

OPERATING INSTRUCTIONS

OPERATIONAL Based on use, the strainers might become clogged with soil and debris as the INSPECTION workday progresses. Operators should regularly inspect the strainers to ensure they
have not become clogged. Clogged strainers will reduce the washing capability of the machine. Instruct operators to clean out the strainers at regular intervals or as required by workload. Do NOT beat strainers to remove soil and debris!

SHUTDOWN & 1. Close the door and turn the machine off by pushing the Power button.

CLEANING

155 F

READY

CYCLE 1

!
CAUTION
CAUTION! Do NOT beat strainers to remove soil and debris!

2. The drain valve will activate and empty the machine of water. 3. When draining stops, remove and clean the strainers and set aside.

4. Unscrew the wash and rinse arms from their manifolds.

5. Verify the nozzles and arms are free from obstruction. If clogged, remove endcaps, clean nozzles with a brush, and flush with fresh water.

07610-004-54-86-M

OPERATION

OPERATING INSTRUCTIONS

SHUTDOWN & 6. Replace end-caps and use a screwdriver to ensure they are tight. CLEANING
Use a screwdriver to ensure end-caps are tight.

7. Ensure the float (located under left strainer) is free of debris.

8. Spray or wipe out interior of machine.

9. Replace wash and rinse arms.

10. Replace the strainers and ensure they are laying flat.

07610-004-54-86-M

11. Use stainless steel polish to clean and protect outside of machine.
15

OPERATION

OPERATING INSTRUCTIONS

DELIMING In order to maintain the machine at its optimum performance level, lime and
corrosion deposits must be removed. The frequency for deliming will be based on water conditions. A deliming solution is available from your chemical supplier. Read and follow all instructions on the label.

If the machine is equipped with an SPS and lime is becoming a frequent problem, the cartridge needs to be replaced. To order a replacement cartridge, see the Scale Prevention System page.

To delime machine:
1. Remove the rinse arms and place in sink with deliming solution (leave for the amount of time recommended by the chemical supplier).
2. Replace the rinse arms. 3. If machine is full of water, close door, press the Power button, and allow
machine to drain and shut-off. 4. Follow the Filling the Wash Tub section of this manual.

5. Open the door and add the amount of deliming solution recommended by the chemical supplier.

6. Close the door and press the Delime button on the display. The status will display “DELIME.”

155 F
DELIME ON

7. Press the Start button.

07610-004-54-86-M

8. The machine will delime, drain, and refill. 9. Wait five minutes, then inspect the machine. If the machine is not delimed,
run again. 10. When clean, press the Delime button. The status will display “READY.” 11. Run the machine through two regular cycles to remove residual deliming
solution. 12. The machine is now ready for normal operation.
16

OPERATION

OPERATING INSTRUCTIONS

DETERGENT Detergent usage and water hardness are two factors that greatly contribute to the CONTROL machine’s operating efficiency. Using the proper amount of detergent can become a
source of substantial savings. A qualified water-treatment specialist can determine what is needed for maximum efficiency from the detergent.

· Hard water greatly affects the performance of the machine, causing the amount of detergent required for washing to increase. If the machine is installed in an area with hard water, the manufacturer recommends the installation of water treatment equipment.

· Deposited solids from hard water can cause spotting that will not be removed with a drying agent. Treated water will reduce this occurence.

· Treated water might not be suitable for use in other areas of operation and it might be necessary to install a water treatment system for the water going to the machine only. Discuss this option with a qualified water treatment specialist.

· Properly train operators on how much detergent is to be used per cycle. Meet with a water treatment specialist and chemical supplier to discuss a complete training program for operators.

· Water temperature is an important factor in ensuring the machine functions

properly, and the machine’s data plate details what the minimum temperatures

must be for the incoming water supply, the wash tank, and the rinse tank. If

minimum requirements are not met, it’s possible that dishes will not be clean or

sanitized.

· Instruct operators to observe the required temperatures and to report when they fall below the minimum allowed. A loss of temperature can indicate a larger problem.

ENERGY SAVER After no cycle for 30 minutes, Energy Saver Mode initiates and the wash heater MODE thermostat turns off. This conserves energy while the machine is idle. Pushing the
start button at any time after Energy Saver Mode is activated turns on the wash heater thermostat, runs a cycle to reheat the wash tank, and resets the timer.

07610-004-54-86-M

MAINTENANCE

PREVENTATIVE MAINTENANCE

PREVENTATIVE The manufacturer highly recommends that any maintenance and repairs not specifically MAINTENANCE discussed in this manual only be performed by qualified service personnel.
Performing maintenance on the machine may void a warranty.

By following the operating and cleaning instructions in this manual, users should get the most efficient results from the machine. As a reminder, here are some steps to ensure that the machine is used properly:

1. Ensure that the water temperatures match those listed on the machine data

plate (on the front-left of machine).

SERIAL NO.: XXXXXXXXX

MODEL: DELTA HT-E-SEER
WASH MOTOR WASH HEATER RINSE HEATER TOTAL LOAD

60Hz 1 PH 2 WIRE

208 VOLT

3/4 HP 3.3 KW 4.1 KW

6.6 A 15.9 A 19.7 A
26.3 A

230 VOLT

3/4 HP 4 KW
5 KW

6.6 A 17.4 A 21.7 A

28.3 A

4000897 Conforms to NSF Std 3

NOTE: WASH AND RINSE HEATER DO NOT OPERATE AT THE SAME TIME. ELECTRICAL LOADS BASED ON WASH
MOTOR AND RINSE HEATER (HIGHEST AMP DRAW)

Intertek 4000897 Conforms to UL Std 921
Conforms to CSA
Std C22.2 No.168

OPERATING PARAMETERS
MINIMUM WASH TEMP MINIMUM RINSE TEMP MIN/MAX INCOMING WATER TEMP WASH CYCLE TIME RINSE CYCLE TIME WATER FLOW PRESSURE

155°F 180°F 40-90°F 80 SEC 9 SEC 10 PSI

CAUTION: IF THIS MACHINE IS CONNECTED TO A CIRCUIT PROTECTED BY FUSES, USE ONLY 30A NON-TIME DELAY FUSE OR OVERCURRENT PROTECTION.

ATTENSION: SE CONNECTER A UN MINIMUM D’ALIMENTATION 30 AMPERES DELAI FUSIBLE DE TYPE NON-TEMPS OU LA PROTECTION CONTRE LES SURINTENSITES.

MINIMUM CIRCUIT AMPACITY @208 VOLTS: 28.0 AMPS @230 VOLTS: 30.0 AMPS
MAXIMUM OVERCURRENT PROTECTION @208 VOLTS: 30 AMPS @230 VOLTS: 35 AMPS

Made in the USA Jackson WWS , Inc 6209 N US HWY 25E
Gray, KY 40734 606-523-9795 09905-004-53-38 B

2. Remove as much soil as possible from ware before loading into racks.

!
CAUTION
CAUTION! Do NOT beat strainers to remove soil and debris!

3. Ensure that strainers are in place, laying flat in the tub, and free of soil and debris before operating the machine. To clean strainers, wipe them out with a rag and rinse under a faucet. For stubborn debris, a toothpick can be used. Do not beat strainers on waste cans; once bent, they will not work properly.

4. Ensure that all wash and rinse arms are secure in the machine before operating.

07610-004-54-86-M

MAINTENANCE

PREVENTATIVE MAINTENANCE

PREVENTATIVE 5. Do not overfill racks. MAINTENANCE
6. Ensure that glasses are placed upside-down in the rack.

7. Ensure that all chemicals being injected into the machine have been verified at the correct concentrations.
8. Clean the machine at the end of every workday (see Shutdown and Cleaning section).
9. If hard water is present, install an SPS into the water line connecting to the machine (see the Water Supply Connections section).
10. Always contact a qualified service agency whenever a serious problem arises.
11. Follow all safety procedures, whether listed in this manual or put forth by local, state, or national codes/regulations.

07610-004-54-86-M

TROUBLESHOOTING

PROGRAMMING

MODEL CONFIRMATION

To access programming, machine should be on and not in cycle.
Programming buttons (up-arrow, down-arrow, and select) are hidden on display and are shown below as red outlines.

A transparent guide to locating the programming buttons is included with machine, behind the kick panel. Lay the guide over
the display and press where indicated.

Factory Setup (Model Selection) 1. Press and hold I and III buttons until “Program” starts flashing (23 seconds).
PROGRAM

!
CAUTION
CAUTION! Machine will not operate properly with wrong program number!

2. Press select button. 3. Use up-arrow or down-arrow button to change program number to “9.”
PROGRAM 9

4. Press select button. 5. “Program” will flash. 6. Press delime button to exit.
150 F
READY CYCLE 1

07610-004-54-86-M

TROUBLESHOOTING

PROGRAMMING

USER SETUP

To access programming mode, the machine should be on and not in cycle.

A transparent guide to locating the programming buttons is included with the machine, behind the control kick panel. Lay the guide over the display and
press where indicated.

The programming buttons (Up-arrow, Down-arrow, and Select) are hidden on the display and are shown below outlined with red dots.
1. Press and hold the Up-arrow and Down-arrow Buttons until “Setup” flashes (23 seconds).
SETUP

2. The display will then change to “Version” and show the firmware versions of the IO module and PCB, Digital Display.

3. Use the Up-arrow Button to cycle through the categories (will be flashing).

· Language · Temperature Scale · Wash Temperature · Boost Temperature

· Wash Offset · Rinse Offset · Boost Offset · Spare Offset

LANGUAGE

07610-004-54-86-M

4. Press the Select Button to choose the category you want to change. · Regardless of the category, Steps 57 remain the same.
5. Use the Up-arrow Button to change the options (will be flashing). Numerical options are shown in the top window.
LANGUAGE ENGLISH
6. Press the Select Button to accept the changes. 7. Press the Delime Button to exit.
21

TROUBLESHOOTING

FAULT CODES

DISPLAY SHOWS
“F1 Service needed,” “No water in Booster”
“F2 Service needed,” “Check booster thermostat”
“F3 No water in wash tank,” “Check inlet water and door” “F4 Service needed,” “Check incoming power”

POSSIBLE CAUSES
1. Low or no water pressure. 2. Faulty inlet valve or fill relay. 3. Contactor to booster heater not turning off. 4. Faulty temperature input (P12) on IO module. 5. Faulty temperature probe (T3). 6. Faulty float switch allows heaters to operate with no water in tub.
1. Contactor to booster heater not turning off. 2. Faulty temperature input (P12) on IO module. 3. Faulty temperature probe (T3).
1. Malfunction of fill solenoid or fill relay. 2. Door is open, which inhibits fill mode. 3. Faulty door switch. 1. Incoming power not properly connected. 2. L3 is missing (3-phase machines only).

“F5 Service needed,” “Check booster thermostat and high limit”

1. Faulty temperature input (P12) on IO module.
2. Faulty temperature probe (T3). 3. Faulty high-limit switch. 4. Faulty booster heater. 5. Booster-heater contactor not energizing.

1. Substitute a 1.8 k resistor for T3, and verify that booster heater turns on. If not, replace IO module.
2. Verify that T3 resistance is consistent with the table on pg. 24. If not, replace T3.
3. Replace high-limit switch.
4. Check booster heater for proper resistance. Replace if incorrect.
5. Verify that drive voltage to contactor coil is present during a call for heat and that contactor closes. If voltage is present, replace contactor. If voltage is not present, check wiring.

07610-004-54-86-M

TROUBLESHOOTING

FAULT CODES

DISPLAY SHOWS POSSIBLE CAUSES

1. Low or no water pressure.

2. Faulty inlet valve or fill relay.

3. Contactor to wash heater not turning off.

“F6 Service needed,” “No water in wash tank”

4. Faulty temperature input (T1) on IO module.

5. Faulty temperature probe (T1).

6. Faulty float switch allows heaters to operate with no water in tub.

“F7 Service needed,” “Check wash tank thermostat”

1. Contactor to wash heater not turning off.
2. Faulty temperature input (P10) on IO module.
3. Faulty temperature probe (T1).

“F8 No water in wash tank,” “Check inlet water and door”
“F9 Service needed,” “Check incoming power”

1. Malfunction of fill solenoid or fill relay. 2. Door is open, which inhibits fill mode. 3. Faulty door switch. 1. Incoming power not properly connected. 2. L3 is missing (3-phase machines only).

1. Faulty temperature input (T1) on I/O module.

“F10 Service needed,” “Check wash tank thermostat and high limit”

2. Faulty temperature probe (T1). 3. Faulty high-limit switch. 4. Faulty wash heater.

5. Wash-heater contactor not energizing.

F11 Service needed check wash tank thermostat

Faulty temperature probe (T1).

REMEDY 1. Verify incoming water pressure is 10 ± 2 PSI.
2. Verify that fill relay is supplying voltage to fill solenoid. Replace faulty component.
3. Check for welded contacts. Verify that output from IO module turns off when above the set temperature.
4. Substitute a 1.2 k resistor for T1, and verify that wash heater turns off. If not, replace IO module.
5. Verify that T1 resistance is correct with respect to temperature (see table on pg. 24). If not, replace T1.
6. Replace float switch. 1. Check for welded contacts. Verify that output from IO module turns off when above the set temperature.
2. Substitute a 1.2 k resistor for T1, and verify that wash heater turns off. If not, replace IO module.
3. Verify that T1 resistance is correct with respect to temperature (see table on pg. 24). If not, replace T1. 1. Replace faulty solenoid or fill relay.
2. Close door to activate door switch.
3. Replace or adjust door switch. 1. Check connections to heater.
2. Verify that L3 is present and connected properly. 1. Substitute a 1.8 k resistor for T1, and verify that wash heater turns on. If not, replace I/O module.
2. Verify that T1 resistance is correct with respect to temperature (see table on pg. 24). If not, replace T1.
3. Replace high-limit switch.
4. Check wash heater for proper resistance. Replace if incorrect.
5. Verify that drive voltage to contactor coil is present during a call for heat and that contactor closes. If voltage present, replace contactor. If voltage not present, check wiring.
Replace probe that connects to P10.

07610-004-54-86-M

TROUBLESHOOTING

FAULT CODES

DISPLAY SHOWS
“F12 Service needed,” “Check booster thermostat”

POSSIBLE CAUSES Faulty temperature probe (T3).

“F13 Communication error,” “Check 6-pin cable”

1. Loose connection in 6-pin cable between display board and I/O module.
2. Faulty 6-pin cable between display board and I/O module.
3. Faulty communication port on I/O module or display board.

REMEDY
Replace probe that connects to P13.
1. Fully disconnect 6-pin cable at each end, and reconnect each end until a click is heard.
2. Inspect for broken wire or unseated terminal by gently pulling on each wire at each end of the cable. Reseat any loose terminals by inserting it fully into the housing using long-nosed pliers. Replace cable if broken wire is found.
3. Temporarily substitute a verified good display board, and check if F13 message recurs. If so, repeat substitution with a good I/O module.

“F14 Service needed,” “Check incoming water pressure or
pressure switch”

1. Low or no water pressure.
2. Faulty pressure switch.
3. Faulty fill valve or fill valve not receiving power.

1. Verify correct PSI. 2. Replace pressure switch. 3. Check continuity and replace if faulty.

“F15 Sanisure violation”

1. Faulty booster heater. 2. Faulty heater contactor.

1. Check amperage on heater. 2. Check voltage on contactor coil and L1 and L2 legs.

“F16 LLC violation” Faulty or corroded probe.

Clean or replace probe.

“F17 Excessive inlet temp”

Inlet water supply too hot.

Ensure inlet water supply is at required temperature.

RESISTANCE-TO-TEMPERATURE VALUES

07610-004-54-86-M

R (k) 11.58 10.37 9.30 7.78 3.05 2.54 2.18 1.58 1.45 1.33 1.16 0.96

°F 69.8 75.2 80.6 89.6 140.0 150.8 159.8 179.6 185.0 190.4 199.4 212.0

TROUBLESHOOTING

!
WARNING

WARNING! Inspection, testing, and repair of electrical equipment should only be performed by qualified service personnel. Certain procedures in this section require electrical tests or measurements while power is applied to the machine. Exercise extreme caution at all times. If test points are not easily accessible, disconnect power, attach test equipment, and reapply power to test. When replacing electrical parts, disconnect power at circuit breaker.

OBSERVATION POSSIBLE CAUSE

Water overflow 1. Clogged drain. from bottom of

door.

2. Machine not level.

REMEDY 1. Remove obstruction.
2. Level machine or increase height to the front.

3. Excessive inlet pressure.

3. Install pressure regulating valve or adjust if one is present. Ensure flow meets data plate specification.

4. Detergent foaming.

4. Reduce detergent quantity.

5. Wash or rinse arm end-cap missing. 5. Replace end-cap.

Wash motor doesn’t operate on wash.

1. Loose or broken wires. 2. Defective Start button. 3. Defective motor contactor.

1. Reconnect or replace wires in motor. 2. Adjust button or replace. 3. Replace.

Little or no water coming through the rinse assemblies.

1. Limed-up rinse heads or piping. 2. Low water pressure.

1. Delime rinse heads.
2. Increase pipe size to machine. Adjust pressure regulating valve.

Rinse water runs 1. Defective plunger in solenoid valve.

continuously

with breaker

2. Defective diaphragm in solenoid valve.

turned off.

1. Replace plunger. 2. Replace diaphragm.

07610-004-54-86-M

TROUBLESHOOTING

!
WARNING

OBSERVATION POSSIBLE CAUSE

Wash

1. Water level low.

temperature not

within range. 2. RTD setpoint too low.

3. Defective RTD. 4. Wash heater defective. 5. Defective heater contactor.

Rinse temperature not within range.
i

1. RTD is defective.
2. Incoming rinse water does not meet minimum temperature on machine data plate.

3. Rinse heater damaged.

4. Setpoint screens set low.

5. Defective heater contactor.

Machine doesn’t drain when power button is pressed.

1. Drain clogged. 2. Defective drain valve. 3. Defective wash pump. 4. Defective motor contactor. 5. Defective timer.

Incorrect water pressure displayed during Fill or Rinse.

1. Water turned off. 2. Transducer disconnected. 3. Pressure transducer defective.

REMEDY 1. Check water level. If low, run new fill cycle. 2. Adjust setpoint. 3. Replace RTD. 4. Replace heater element. 5. Replace contactor. 1. Replace if necessary. 2. Adjust as required.
3. Check amperage. Replace if necessary. 4. Adjust rinse tank setpoint. 5. Replace contactor. 1. Remove obstruction. 2. Replace drain valve. 3. Replace wash pump. 4. Replace contactor. 5. Replace timer. 1. Turn water on. 2. Verify wiring. 3. Replace pressure transducer.

07610-004-54-86-M

PARTS
1 2
3

TERMINAL BLOCK BOX
4 5
6 7 8

ITEM 1 2
3 4 5 6 7 8

QTY 1 1 1 1 1 2 2 1 1

07610-004-54-86-M

DESCRIPTION Power Connection Decal Terminal Block Box Terminal Box Cover (not shown) Strain Relief Terminal Block Track Terminal Block Locknut, 10-24 Hex with Nylon Insert Decal, L1, N Ground Lug

PART NUMBER 09905-011-47-35 05700-004-36-47 05700-003-27-70 05975-003-37-56 05700-000-43-60 05940-500-02-19 05310-373-01-00 09905-011-62-72 05940-200-76-00
27

PARTS

CONTROL KICK PANEL
Complete Control Kick Panel Assembly 05700-004-52-41

ITEM 1 2 3 4 5 6 7 8 9 10 11

QTY 1 2 2 1 4 1 4 1 4 1 1

DESCRIPTION Control Kick Panel Locknut, 6-32 Hex with Nylon Insert P-clamp, 1/4″ ID Bushing, Snap Locknut, 10-24 Hex with Nylon Insert Cover, Display Nut, Thumb 6-32 Nylon PCB, Digital Display Spacer, Unthreaded, 9/32″ Nylon Panel & Membrane Switch Assembly Communication Cable

07610-004-54-86-M

11
PART NUMBER 05700-004-52-40 05310-373-03-00 05975-002-61-42 05975-210-09-00 05310-373-01-00 05700-004-52-43 05310-002-83-12 05700-004-52-37 05975-004-47-89 05700-004-68-71 05700-004-33-64
28

PARTS
1 17 2

ELECTRICAL PANEL

Complete Electrical Panel Assembly 05700-005-00-22
NOTICE
Machines with serial numbers before 22E406186 have a different panel. Click here to open earlier manual.

11 22

15 3

5 18
12

20
21 4
13

14 8 6 10 9 19
7 16

07610-004-54-86-M

PARTS

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22

QTY 3 1 1 1 1 16 5 2 2 15 1 1 1 1 2 3 3 9 11 2 2 1

DESCRIPTION Contactor, 30 A 240 V Relay Soft Start I/O Module Dinrail, 5 3/4″ Terminal Block Separator, Terminal Block End Bracket, Terminal Jumper Bars, 3-pole Tag, Marking Holder, 6-pole Fuse Bushing, Snap, 1 1/8″ Dinrail, 2″ Panel, Electrical Screw, 10-32 x 1″ Screw, 6-32 x 3/8″ Nut, Plated Screw, 10-32 x 1/2″ Fastener Screw, 10-32 x 1/4″ Locknut, 10-32 with Nylon Insert Fuse, Time-delay, 8 A, 250 V

ELECTRICAL PANEL
PART NUMBER 05945-002-74-20 05945-111-89-75 05945-004-55-75 06401-005-05-85 05700-021-72-75 05999-004-90-68 05999-004-90-67 05999-004-90-66 05999-004-90-71 05999-004-90-72 05920-002-42-13 05975-210-08-00 05700-002-36-09 05700-004-97-31 05305-002-19-42 05305-002-25-91 05340-118-04-00 05305-002-80-88 05340-111-58-10 05305-173-01-00 05310-004-28-70 05920-004-85-54

07610-004-54-86-M

PARTS

CHEMICAL FEEDER PUMP ASSEMBLY
Complete Chemical Feeder Pump Assembly 05700-005-00-23
NOTICE
Machines with serial numbers before 22E406186 have
different pumps. Click here to open earlier manual.
1 2

3 4
07610-004-54-86-M

5 6
8

7
9 10 11
31

PARTS

CHEMICAL FEEDER PUMP ASSEMBLY

ITEM 1 2 3 4 5 6 7 8 9 10 11

QTY 1 1 1 1 4 4 2 1 1 1 1

DESCRIPTION Power Supply Panel, Peri-pump Peri-pump Assembly Peri-pump Assembly P-clamp, 1/4″ ID Locknut, 10-24 Hex with Nylon Insert Stiffener, Chemical Tube Chemical Port Assembly Tubing, Blue, 1/4″ Tubing, Red, 1/4″ Tubing, Clear, 1/8″

PART NUMBER 05950-004-81-79 05700-004-99-72 05700-004-71-63 05700-005-00-29 05975-002-61-42 05310-373-01-00 05700-002-66-49 05700-004-30-86 04720-604-11-00 04720-601-12-00 04720-111-58-09

07610-004-54-86-M

PARTS

CHEMICAL FEEDER PUMPS

ITEM 1 2 3 4 5 6 7 8 9 10

QTY 2 4 1 2 8 4 1 2 1 1

DESCRIPTION Pump Housing Screw, 8-32 x 3/8″ Phillips Roller, Plastic Pump Cover Screw, 6-32 x 3/4″ Phillips Screw, 8-32 x 1/2″ Phillips Tube, Squeeze, 8″ Motor, 14 RPM Roller, Plastic Tube, Squeeze, 9″

07610-004-54-86-M

PART NUMBER 04320-111-37-09 05305-011-37-07 04320-002-82-28 04320-111-37-08 05305-011-37-05 05305-011-37-06 05700-003-22-89 04320-011-63-33 04320-111-65-27 05700-011-65-21
33

PARTS

Complete Door Assembly 05700-004-54-05

DOOR
11 14 21

16 17
18 19
15 20

07610-004-54-86-M

PARTS

ITEM

QTY

DESCRIPTION Outer Door Weldment Hinge Spacer Hinge, Right Hinge, Left Baffle, Door Inner Door Fastener, 10-32 Stop, Door Hinge Retaining Plate Door Handle Bolt, 1/4-20 x 3/8″ Hex Screw, 10-32 x 1/4″ Switch Assembly Washer, 1/4-20 ID Channel, Door Seal Screw, 1/4-20 x 1 1/2″ Hex Head Gasket, Door L Gasket Clamp Pop Rivet, 1/8″ x 3/8″ Screw, 10-32 x 1/2″ with Washer Bracket, Door Magnet

DOOR
PART NUMBER 05700-004-54-06 05700-003-33-42 05700-003-32-72 05700-003-32-71 05700-003-33-38 05700-004-54-08 05340-111-58-10 05700-003-32-55 05700-011-44-37 05700-003-26-62 05305-274-20-00 05305-173-01-00 05700-003-34-80 05311-174-01-00 05700-004-54-11 05305-274-23-00 05330-004-36-05 05700-004-36-56 05320-003-06-98 05305-002-32-37 05700-004-52-73

07610-004-54-86-M

PARTS

DOOR INTERLOCK
Complete Door Interlock Assembly, 208-230 V 05700-004-99-57

NOTICE
Machines with serial numbers before 22E406186 have a
different door interlock. Click here to open earlier manual.

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13
07610-004-54-86-M

QTY 6 6 1 1 2 1 1 1 2 1 2 2 1

DESCRIPTION Screw, 6-32 x 5/8″ Locknut, 6-32 Hex with Nylon Insert Link, Interlock Connector Pin, Interlock Switch, Interlock Synchronous Gearmotor, 6 RPM, 230 V, 60 Hz Interlock Guide Interlock Cam Shoulder Screw, 10-32 Bracket, Interlock Screw, 10-32 x 1/2″ Locknut, 10-32 with Nylon Insert Set Screw, 6-32 x 1/4″

PART NUMBER 05305-011-39-85 05310-373-03-00 05700-004-71-37 05700-004-71-49 05930-004-71-36 06105-004-70-04 05700-004-71-50 05700-004-71-39 05700-004-71-40 05700-004-99-64 05305-011-39-36 05310-373-02-00 05305-004-71-42
36

PARTS

MISCELLANEOUS DOOR COMPONENTS

Parts are not shown to scale in relation to each other.

1 2

ITEM 1 2 3 4
5 6 7 8 9 10 11

QTY 1 2 1 1
2 2 4 2 2 1 1 1 1

DESCRIPTION Switch Mounting Plate Assembly Door Spring Cover, Left Hinge Weldment Cover, Right Hinge Weldment Hinges secured with Locknut, 1/4-20 Hex with Nylon Insert O-ring Latch Spring Latch Nut Locknut, 6-32 Hex with Nylon Insert Screw, 6-32 x 1/4″ Door Switch Door Switch Bracket Door Switch & Bracket Assembly Complete Switch Mount Assembly

PART NUMBER 05700-003-33-54 05700-003-32-85 05700-004-36-80 05700-004-36-81 05310-374-01-00 05330-003-32-34 05700-003-32-32 05700-003-32-33 05310-373-03-00 05305-171-01-00 05930-003-31-44 05700-003-31-43 05700-003-32-21 06401-004-47-76

07610-004-54-86-M

PARTS
6 5

3 5

18
07610-004-54-86-M

5 8 9

15 17
14

15
16 15 11 15
12 13

15 2 16
13

WASH & MOTOR
5
1 5
15 7 15
10 19
20
38

PARTS

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

QTY 1 1 1 2 5 1 1 1 1 1 1 1 2 1 7 2 1 1 1 1

DESCRIPTION Wash Arm Assembly Motor Support Wash Halo Pipe Clamp Wash Arm End- cap Gasket, Manifold Hose, 5/8″ ID, Blue Silicone Gasket, Wash Hub Wash Hub Pump and Motor Hose, 7/8″ ID x 8″, Blue Silicone Hose, Bottom Manifold Pump Clamp, 1 1/16″ to 2″ Hose, 1 1/4″ ID x 4″, Blue Silicone Clamp, 13/16″ to 1 1/2″ Hosebarb, 1 3/4″ Drain Valve Assembly Drain Hose Bracket, Soft Starter Soft Starter

WASH & MOTOR
PART NUMBER 05700-021-39-23 05700-004-53-96 05700-004-42-21 05700-000-35-06 05700-003-31-59 05330-003-75-91 05700-004-53-99 05330-002-34-77 05700-004-43-04 06105-004-50-75 05700-004-43-76 05700-001-22-92 04730-719-18-00 05700-004-54-00 04730-719-06-09 04730-011-65-86 04730-003-33-64 04720-004-32-00 05700-004-55-94 05945-004-55-75

07610-004-54-86-M

PARTS
1

3 2

RINSE MANIFOLD
4

4 3

ITEM 1 2 3
4
5 6 7

QTY 1 1 4 2 2 2 2 2

DESCRIPTION Complete Rinse Manifold Assembly Pipe Clamp Rinse Arm End-cap (includes o-ring) Complete Rinse Arm Assembly Rinse Arm Bearing Assembly, Rinse Arm O-ring (included in item #5) Retaining Ring

3
3 Rinse Arm Bearing Kit 06401-004-57-50
5
6 7
PART NUMBER 05700-004-52-44 05700-000-35-06 05700-004-34-62 05700-004-39-39 05700-004-38-75 05700-004-54-71 05330-002-60-69 05340-112-01-11

07610-004-54-86-M

PARTS
8 9

Complete SEER Plumbing Assembly 05700-004-63-78
CONNECTS TO COLD WATER INLET ON SEER SYSTEM
6
11*
CONNECTS TO HOT WATER OUTLET ON
SEER SYSTEM
5

PLUMBING
7
10 4

07610-004-54-86-M

*Item not included in part number of complete SEER plumbing assembly and must be ordered separately.

PARTS

PLUMBING

ITEM 1 2 3 4 5 6 7 8 9 10 11*

QTY 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION Inlet Plumbing Assembly Pressure Regulating Valve Assembly, Dial- set Booster Tank Discharge Assembly Tee, 1/2″ Brass Nipple, 1/2″ Close Brass Water Hammer Arrestor, 1/2″ SEER Inlet Plumbing Assembly Elbow, 90-degree, 1/2″ Street Brass Adapter, Double Male, 3/4-11.5 x 1/2-14 Inlet Hose Assembly Bracket, Plumbing Support

PART NUMBER 05700-004-53-98 05700-004-94-35 05700-004-55-97 04730-211-27-00 04730-207-15-00 04730-004-58-56 05700-004-60-46 04730-206-08-00 04720-004-51-55 05700-004-60-52 05700-004-56-19

*Item not included in part number of complete SEER plumbing assembly and must be ordered separately.

07610-004-54-86-M

PARTS
1
2 7

RINSE PLUMBING
Complete Rinse Plumbing Assembly 05700-004-61-32

8e 8d 8c
8b
5

8 9
3 4

07610-004-54-86-M

PARTS

ITEM 1
2
3 4 5
6
7
8 8a 8b 8c 8d 8e 8f 8g 8h
9

QTY 1
1
1
1
1
1
1
1 1 1 2 1 1 1 2 1
1

DESCRIPTION Vacuum Breaker, 1/2″ Brass
Hose, Red, 1/2″ ID, 14″
Nipple, 1/2″ x 3″, Brass
Elbow, 1/2″, 90-degree, Brass
Elbow, 90-degree
Pipe, 3″, Copper
Adapter, 1/2″
Complete Rinse Injector Assembly Rinse Injector Only Gasket, Rinse Injector Screw, 1/4-20 x 1″ Check Valve Fitting, Outlet Elbow Nut, Tube, 1/8″ Plug, 1/8″ Brass Pressure Transducer
Harness, Transducer

RINSE PLUMBING
PART NUMBER 04820-003-06-13 05700-004-99-89 04730-004-20-10 04730-011-42-96 04730-406-32-01 05700-001-05-21
04730-002-64-68 05700-004-43-86
09515-004-22-73 05330-003-75-91 05305-011-81-58 04820-111-51-14 04820-111-51-18 04730-011-59-45 04730-209-07-37 05945-004-17-01 05700-004-33-62

07610-004-54-86-M

PARTS

SCALE PREVENTION SYSTEM
SCALE PREVENTION SYSTEM (SPS) OPTION
SPS 04730-003-28-03
NOTICE Must be installed vertically. The provided bracket is secured to the wall. Observe proper inlet/outlet water directions (flow directions are molded into the top of the head). Line pressure should be released
before changing cartridges. Machine should be delimed before installation.

Replacement Cartridge (inspect at least every 6 months)
04730-003-28-04
Replacement Test Strip (Not Shown)
06401-003-28-06

07610-004-54-86-M

PARTS

14 13 12 11
10
1 2

RINSE TANK

7 3

16 4

07610-004-54-86-M

5
46

PARTS

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16

QTY 1 1 1 4 4 2 2 1 1 1 1 1 1 1 1 1

DESCRIPTION Rinse Tank Heater Gasket Rinse Heater, 5.45 kW, 208-230 V Lockwasher, Split 5/16″ Nut, Hex 5/16-18 Cable, Temperature Probe Thermistor Probe, 4″ with 18″ Cable Fitting, 1/4″, Brass Nut/Sleeve Plug, 1/4″ Brass Nipple, 1/2″ Close Brass Fitting, 1/2″ x 1/4″ Tee, 1/2″ Brass Nipple, 1/2″ x 3″ Brass Elbow, 90-degree, 1/2″ Brass Thermostat, Rinse Tank High-limit (Not Shown) Cable, Temperature Probe

RINSE TANK
PART NUMBER 05700-004-41-88 05330-011-47-79 04540-004-45-12 05311-275-01-00 05310-275-01-00 05700-004-33-23 06685-004-34-58 05310-924-02-05 04730-209-01-00 04730-207-15-00 05700-004-36-74 04730-211-27-00 04730-004-20-10 04730-011-42-96 05930-004-33-12 05700-004-33-58

07610-004-54-86-M

PARTS
Complete SEER System Assembly 05700-004-63-06
NOTICE Before ordering SEER System parts, see note on next page.

SEER SYSTEM

2
19 6 5 1

14
STICKY SIDE

5 17 4 3

7 13

8 16 20 11

12 18

07610-004-54-86-M

PARTS

SEER SYSTEM

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20

QTY 1 1 1 1 5 1 2 2 1 1 1 12 8 1 2 1 1 1 1 1

DESCRIPTION Motor, Fan Wheel, Blower Bracket, Bearing Boot Bushing and Housing Assembly Locknut, 10-24 Hex with Nylon Insert Bracket, Motor Adjustment Grommet, Push-in, 3/4″ ID Bracket, Enclosure Filler Plate Diversion Plate Upper Shield Heat Exchanger, 3/8″ Tubes Locknut, 1/4-20 Hex with Nylon Insert Screw, 6-32 x 1/2″ Condenser Assembly Bolt, 1/4-20 x 1/2″ Plumbing, SEER Inlet Bracket, Bearing Hard Stop Lower Shield Spacer, 1/2″ OD 1/4″ ID Nylon, Black Gasket, Exchanger to Tub

PART NUMBER 05999-004-63-31 05999-004-59-13 05700-004-50-94 03120-004-50-88 05310-373-01-00 05700-004-58-81 05330-004-59-14 05700-004-58-93 05700-004-59-04 05700-004-58-98 04420-004-58-96 05310-374-01-00 05305-004-23-63 05700-004-58-94 05305-274-02-00 05700-004-60-46 05700-004-67-53 05700-004-63-04 03120-004-95-13 05330-004-59-16

NOTICE Machines with serial numbers before 19G376587 have an older version of the SEER System. Click here to open earlier manual.

07610-004-54-86-M

PARTS

TUB & FRAME

27
26 25

7 8
9 11
10

FRONT

DETAIL A

28 24 23 22
19 21
BACK

07610-004-54-86-M

20 18

PARTS

ITEM 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17
18
19 20 21 22 23 24 25 26 27 28

QTY 2 1 2 1 2 1 1 1 1 2 1 4 2 1 1 2 1 1 1 1 1 1 1 1 1 1 1 1 1

DESCRIPTION Plug, Shroud Top Shroud Strainer Tub Back Channel Back Left Frame Assembly Tub Front Hinge Cover, Left Hinge Stop, Left Door Spring Left Shroud Foot, Adjustable Bracket, High-limit Thermostat, High-limit Thermostat, High- limit Fitting, Brass Sleeve Thermistor Probe, 4″ with 18″ Cable Wash Heater, 4 kW Gasket, Wash Heater (Not Shown) Bracket, Terminal Box Bracket, Rinse Tank Plumbing Support Fitting, Bulkhead to 1/2″ Hosebarb Stand Assembly Right Frame Assembly Door Interlock Assembly Hinge Stop, Right Hinge Cover, Right Right Shroud Rear Dress Panel

TUB & FRAME
PART NUMBER 05700-003-32-50 05700-003-37-06 05700-004-09-43 05700-004-55-03 05700-004-04-24 05700-004-52-33 05700-004-51-79 05700-002-18-41 05700-003-32-61 05700-003-32-85 05700-004-55-00 05340-108-01-03 05700-004-36-37 05930-004-33-12 05930-004-33-15 05310-924-02-05 06685-004-34-58 04540-003-99-44 05330-011-61-34 05700-004-55-90 05700-004-56-19 04730-011-45-21 05700-004-54-13 05700-004-52-32 See Door Interlock page. 05700-003-32-60 05700-004-22-66 05700-004-52-49 05700-004-58-13

07610-004-54-86-M

PARTS
Parts are not shown to scale in relation to each other.

MISCELLANEOUS PARTS

4 5

Drain Water Tempering Kit Install Instructions

ITEM 1 2 3 4 5

QTY 1 1 1 1 1

DESCRIPTION Rail, Left Rack Rail, Right Rack Splash Shield Dual Float Switch Drain Water Tempering Kit

07610-004-54-86-M

PART NUMBER 05700-031-37-89 05700-031-37-88 05700-003-33-51 06680-004-48-53 06401-004-59-11
52

SCHEMATICS
NOTICE
Machines with serial numbers before 22E406186 have a different schematic.
Click here to open earlier manual.

208/230 V, 50/60 HZ, 1-PHASE

07610-004-54-86-M

Jackson WWS, Inc. · 6209 N. US Hwy 25E · Gray, KY 40734 USA 1.888.800.5672 · www.jacksonwws.com
Delta HT-E-SEER Manual · 07610-004-54-86-M

References

Jackson WWS – Built to specification. Energy efficient. Built to last.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format) >>

Download This Manual (PDF format)

Download this manual >>

HT-E-SEER Delta Series Glasswasher Dishmachines

Product Information

Delta Series Glasswasher Dishmachines

Manufacturer’s Limited Warranty

Travel Limitations

Replacement Parts Warranty

Product Changes

Disclaimer of Warranties

Limitation of Remedies and Liabilities

Items Not Covered

Product Usage Instructions

Installation

Operation

Service and Maintenance

Specifications

Frequently Asked Questions

Q: Where can I register my warranty?

Q: What should I do if my Dishmachine requires service beyond

Q: Can I use the Dishmachine outside of the United States and

Q: How often should I clean the debris filter?

References

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Related Manuals