Hannspree Hanns.G Hi221D 22-Inch TFT LCD Monitor User Manual

Hannspree Hanns.G Hi221D 22-Inch TFT LCD Monitor

Before operating the monitor, please read this manual thoroughly. This manual should be retained for future reference.

FCC Class B Radio Frequency Interference Statement

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

The device complies with Parts 15 of the FCC Rule. Operation is subject to the following two conditions﹕(1) this device may not cause harmful interference﹔and (2) this device must accept any interference received, including interference that may cause undesired operations.

CANADA

This Class B digital apparatus meets all requirements of the Canadian Interference-Causing Equipment Regulation.

This device complies with requirement of EMC directive 89/336/EEC with regard to Electromagnetic Compatibility, and 73/23/EEC and 93/68/EEC with regard to Low Voltage directive.

Socket-outlet shall be near the equipment and shall be accessible.

Congratulations!

The display you have just purchased carries the TCO’03 Displays label. This means that your display is designed, manufactured and tested according to some of the strictest quality and environmental requirements in the world. This makes for a high performance product, designed with the user in focus that also minimizes the impact on our natural environment.

Some of the features of the TCO’03 Display requirements:

Ergonomics

• Good visual ergonomics and image quality in order to improve the working environment for the user and to reduce sight and strain problems. Important parameters are luminance, contrast, resolution, reflectance, colour rendition and image stability.

Energy

• Energy-saving mode after a certain time – beneficial both for the user and the environment
• Electrical safety

Emissions

• Electromagnetic fields
• Noise emissions

Ecology

• The product must be prepared for recycling and the manufacturer must have a certified environmental management system such as EMAS or ISO 14 001
• Restrictions on
  • chlorinated and brominated flame retardants and polymers
  • heavy metals such as cadmium, mercury and lead.
• The requirements included in this label have been developed by TCO Development in cooperation with scientists, experts, users as well as manufacturers all over the world. Since the end of the 1980s TCO has been involved in influencing the development of IT equipment in a more user-friendly direction. Our labelling system started with displays in 1992 and is now requested by users and
• IT-manufacturers all over the world.

For more information, please visit www.tcodevelopment.com

Recycling Information

• We, Hanns.G care very much about our environment protection strategy and firmly believe that it helps us have healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
• These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels. On the contrary, other material can be classified to hazardous and poisoned substances. We strongly encourage you to contact the provided information to recycle this product.

For more information, please visit  www.hannsg.com

SAFETY NOTICE

1.  The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
2. Shielded interface cables and AC power cord, if any, must be used in order to comply with the emission limits.
3. The manufacturer is not responsible for any radio or TV interference caused by unauthorized modification to this equipment. It is the responsibilities of the user to correct such interference.

WARNING:

To prevent fire or shock hazard, do not expose the monitor to rain or moisture. Dangerously high voltages are present inside the monitor. Do not open the cabinet. Refer servicing to qualified personnel only.

PRECAUTIONS

• Do not use the monitor near water, e.g. near a bathtub, washbowl, kitchen sink, laundry tub, swimming pool or in a wet basement.
• Do not place the monitor on an unstable cart, stand, or table. If the monitor falls, it can injure a person and cause serious damage to the appliance. Use only a cart or stand recommended by the manufacturer or sold with the monitor. If you mount the monitor on a wall or shelf, use a mounting kit approved by the manufacturer and follow the kit instructions.
• Slots and openings in the back and bottom of the cabinet are provided for ventilation. To ensure reliable operation of the monitor and to protect it from overheating, be sure these openings are not blocked or covered. Do not place the monitor on a bed, sofa, rug, or similar surface. Do not place the monitor near or over a radiator or heat register. Do not place the monitor in a bookcase or cabinet unless proper ventilation is provided.
• The monitor should be operated only from the type of power source indicated on the label. If you are not sure of the type of power supplied to your home, consult your dealer or local power company.
• Unplug the unit during a lighting storm or when it will not be used for long period of time. This will protect the monitor from damage due to power surges.
• Do not overload power strips and extension cords. Overloading can result in fire or electric shock.
• Never push any object into the slot on the monitor cabinet. It could short circuit parts causing a fire or electric shock. Never spill liquids on the monitor.
• Do not attempt to service the monitor by yourself; opening or removing covers can expose you to dangerous voltages and other hazards. Please refer all servicing to qualified service personnel.
• To ensure satisfactory operation, use the monitor only with UL listed computers which have appropriate configured receptacles marked between 100 – 240V AC, Min. 5A.
• The wall socket shall be installed near the equipment and shall be easily accessible.

SPECIAL NOTES ON LCD MONITORS

The following symptoms are normal with LCD monitor and do not indicate a problem.

• Due to the nature of the fluorescent light, the screen may flicker during initial use. Turn off the Power Switch and then turn it on again to make sure the flicker disappears.
• You may find slightly uneven brightness on the screen depending on the desktop pattern you use.
• The LCD screen has effective pixels of 99.99% or more. It may include blemishes of 0.01% or less such as a missing pixel or a pixel lit all of the time.
• Due to the nature of the LCD screen, an afterimage of the previous screen may remain after switching the image, when the same image is displayed for hours. In this case, the screen is recovered slowly by changing the image or turning off the Power Switch for hours.
• If the screen suddenly flashes erratically or the backlighting fails, please contact your dealer or service center for repair. Do not attempt to repair the monitor yourself.

Lamp Disposal

LAMP(S) INSIDE THIS PRODUCT CONTAIN MERCURY AND MUST BE RECYCLED OR DISPOSED OF ACCORDING TO LOCAL, STATE OR FEDERAL LAWS. FOR MORE INFORMATION, CONTACT THE ELECTRONIC INDUSTRIES ALLIANCE AT WWW.EIAE.ORG. FOR LAMP SPECIFIC DISPOSAL INFORMATION CHECK WWW.LAMPRECYCLE.ORG.

BEFORE YOU OPERATE THE MONITOR

FEATURES

• 22” Wide screen TFT Color LCD Monitor
• Crisp, Clear Display for Windows
• Recommended Resolutions: 1680 X 1050 @60Hz
• EPA ENERGY STAR®
• Ergonomic Design
• Space Saving, Compact Case Design

CHECKING THE CONTENTS OF THE PACKAGE

The product package should include the following items:

LCD Monitor

Cables and User manual

INSTALLATION INSTRUCTIONS

INSTALLATION:

1. Align the monitor with the opening in the base.
2. Note that the longer section of the base points forward.
3. Snap the monitor into its base. A clear click sound will affirm that the base is connected correctly.
4. Verify that the monitor is securely attached to the base by looking at the bottom of the base and making sure that the clips are fully engaged in the base.

REMOVAL:

1. Flip over the monitor so that it is upside down.
2. Press the button on the arm that holds the monitor in place.
3. Gently pull the base from the monitor untill they are unattached.

POWER

POWER SOURCE:

1. Make sure that the power cord is the correct type required in your area.
2. This LCD monitor has an Internal universal power supply that allows operation in either 100/120V AC or 220/240V AC voltage area (No user adjustment is required.)
3. Connect the AC-power cord on one end to your LCD monitor’s AC input socket, and the other end to wall outlet.

MAKING CONNECTIONS

CONNECTING TO A PC:

Turn off your computer before performing the procedure below.

1. Connect one end of the D-Sub cable to the back of the monitor and connect the other end to the computer’s D-Sub port.
2. Connect one end of the DVI-D cable (Dual input mode optional) to the back of the monitor and connect the other end to the computer’s DVI-D port.
3. Connect the audio cable between the monitor’s audio input and the PC’s audio output (green port).
4. Plug one end of the AC power cord to the LCD monitor’s AC input socket, and the other end to Wall outlet.
5. Turn on your monitor and computer.

Figure 2. Connecting to a PC

ADJUSTING THE VIEWING ANGLE

• For optimal viewing it is recommended to look at the full face of the monitor, then adjust the monitor’s angle to your own preference.
• Hold the stand so you do not topple the monitor when you change the monitor’s angle.
• You are able to adjust the monitor’s angle from -5° to 20°.

NOTES:

• Do not touch the LCD screen when you change the angle. It may cause damage or break the LCD screen.
• Be careful not to place fingers or hands near the hinges when tilting the monitor, otherwise pinching can result..

OPERATING INSTRUCTIONS

GENERAL INSTRUCTIONS

Press the power button to turn the monitor on or off. The other control buttons are located on the front panel of the monitor (See Figure 4). By changing these settings, the picture can be adjusted to your personal preferences.

• The power cord should be connected.
• Connect the Signal cable from the monitor to the VGA card.
• Press the power button to turn on the monitor. The power indicator will light up.

CONTROL PANEL BUTTON

FRONT PANEL CONTROL

• Power Button:
  • Press this button to switch ON/OFF of monitor’s power.
• Power Indicator:
  • Green — Power On mode.
  • Orange — Power saving mode.
• MENU / ENTER:
  • Activates the OSD menu or confirms adjustments to settings.
  • Exit OSD volume display when in volume OSD status.
• Volume >/<:
  • Activates the volume control when the OSD is OFF.
  • Navigate through adjustment icons when OSD is ON or adjust a function when function is activated.
• Auto Adjust button: (for D-sub only)
  • When OSD menu is in off status, press and hold this button for more than two seconds to activate the Auto Adjustment function.
  • (The Auto Adjustment function is used to optimized the H-Position, V-Position, Clock and Phase.)

NOTES:

• Do not install the monitor in a location near heat sources such as radiators or air dusts, or in a place subject to direct sunlight, or excessive dust or mechanical vibration or shock.
• Save the original shipping box and packing materials, as they will come in handy if you ever have to ship your monitor.
• For maximum protection, repackage your monitor as it was originally packed at the factory.
• To keep the monitor looking new, periodically clean it with a soft cloth. Stubborn stains may be removed with a cloth lightly dampened with a mild detergent solution. Never use strong solvents such as thinner, benzene, or abrasive cleaners, since these will damage the cabinet. As a safety precaution, always unplug the monitor before cleaning it.
• Function Key Lock:
  Press the <「Volume -」, >「Volume +」 and the 「Menu」 buttons simultaneously to enable the Function Key Lock. When the Function Key Lock is enabled, only the Power button is active. Press the <「Volume -」, >「Volume +」 and the 「Menu」buttons simultaneously again to unlock the function keys.

HOW TO ADJUST A SETTING

Main Manue

• Brightness: Select the「Brightness」option on the「Main Menu」. Enter the option by pressing the 「Menu」 button again, and adjust the level.
• Contrast: Select the「Contrast」option on the「Main Menu」. Enter the option by pressing the 「Menu」 button again, and adjust the level.
• Image Setting: Select the「Image Setting」on the「Main Menu」, and then enter the option.
• Color Setting : Select the「Color Setting」option on the 「Main Menu」, and then enter the option.
• OSD Setting: Select the「OSD Setting」option on the 「Main Menu」, and then enter the option.
• Other Setting: Select the「Other Setting」option on the 「Main Menu」, and then enter the option.
• Input Setting: Select the「Input Setting」option to change between the analog (D-Sub) or Digital (DVI) source. Enter the option and select Analog or Digital.
• Exit: Exit the OSD menu function.

Image Setting

• H-position: Select the「H-position」option to shift the screen image to the left or right. Enter the option and adjust the level.
• V-position: Select the「V-position」option to shift the screen image up or down. Enter the option and adjust the level.
• Clock  Adjustment: Select the「Clock Adjustment」option to reduce the vertical flicker of characters on the screen. Enter the option and adjust the level.
• Phase Adjustment: Select the「Phase Adjustment」option to reduce the horizontal flicker of characters on the screen. Enter the option and adjust the level.
• Exit: Exit the OSD menu function.

Color Setting

• 5500K/6500K/ 9300K: Move the cursor to one of the preset options and select it.
• User: Move the cursor to the User option and select it
  • To adjust the red, enter the「R」option and adjust the level.
  • To adjust the green, enter the「G」option and adjust the level.
  • To adjust the blue, enter the「B」option and adjust the level.
• Exit: Exit the OSD menu function.

OSD Setting

• OSD H-Position: Select the「OSD H-Position」option to adjust the horizontal position of the OSD. Enter the option and adjust the level.
• OSD V-position: Select the「OSD V-Position」option to adjust the vertical position of the OSD. Enter the option and adjust the level.
• OSD Time-out: Select the「OSD Time-out」option to set the OSD time out from 10 to 120 seconds. Enter the option and adjust the level.
• OSD Transparency:
  • Select the「OSD Transparency」option to adjust the transparency of the
  • OSD. Enter the option and adjust the level.
• OSD Color:
  • Select the「OSD Color」setting option to adjust the color of the OSD.
  • Enter the option and adjust the level.
• Language
  • Select the「Language」option to change the language of the OSD.
  • Enter the option and select a language. (Reference only, the OSD Language is depended on selected model)
• Exit: Exit the OSD menu function.

Other Setting

• DDC/CI: Select the「DDC/CI」option to switch the function On or Off. (dual input mode optional)
• Volume: Select the「Volume」option to set the volume level from 0 to 100. Enter the option and adjust the level.
• Sharpness: Select the 「Sharpness」option to adjust the sharpness of the display. Set the value from 0 to 6.
• DOS mode: Select the「DOS mode」option to set the monitor for use with PC. Enter the option and select 720 × 400 or 640 × 400.
• Factory Reset: Select the「Factory Reset」option to reset to the monitor’s default setting. This will erase the current settings. Enter the option and select On or Off.
• Exit: Exit the OSD menu function.

PLUG AND PLAY

Plug & Play DDC2B Feature

This monitor is equipped with VESA DDC2B capabilities according to the VESA DDC STANDARD. It allows the monitor to inform the host system of its identity and, depending on the level of DDC used, communicate additional information about its display capabilities. The DDC2B is a bidirectional data channel based on the I²C protocol. The host can request EDID information over the DDC2B channel.

THIS MONITOR WILL APPEAR TO BE NON-FUNCTIONAL IF THERE IS NO VIDEO INPUT SIGNAL. IN ORDER FOR THIS MONITOR TO OPERATE PROPERLY, THERE MUST BE A VIDEO INPUT SIGNAL.

This monitor meets the Green monitor standards as set by the Video Electronics Standards Association (VESA) and/or the United States Environmental Protection Agency (EPA) and The Swedish Confederation Employees (NUTEK). This feature is designed to conserve electrical energy by reducing power consumption when there is no video-input signal present. When there is no video input signal this monitor, following a time-out period, will automatically switch to power saving mode. This reduces the monitor’s internal power supply consumption. After the video input signal is restored, full power is restored and the display is automatically redrawn. The appearance is similar to a “Screen Saver” feature except the display is completely off. The display is restored by pressing a key on the keyboard, or clicking the mouse.

TECHNICAL SUPPORT (FAQ)

Q & A FOR GENERAL PROBLEMS

*Power Cord should be connected

No Plug & Play

| *Check if the PC system is Plug & Play compatible

*Check if the Video Card is Plug & Play compatible

*Check if any plug pins on the D-Sub or DVI-D connector are bent

The display is too dark or

too bright.

| *Adjust the Contrast and Brightness Controls.
Picture bounces or a wave

pattern is present in the picture

| *Move electrical devices that may cause electrical interference.

The power LED is ON (orange) but there’s no video or no picture.

| *Computer Power Switch should be in the ON position.

*Computer Video Card should be snugly seated in its slot

*Make sure monitor’s video cable is properly connected to the computer.

*Inspect monitor’s video cable and make sure none of the pins are bent.

*Make sure computer is operational by hitting the CAPS LOCK key on the keyboard while observing the CAPS LOCK LED. The LED should either turn ON or OFF after

hitting the CAPS LOCK key.

Missing one of the primary

colors (RED, GREEN, or BLUE)

| Inspect the monitor’s video cable and make sure that none of the pins are bent.
Screen image is not centered or sized properly.| Adjust pixel frequency CLOCK and PHASE or press hot-key (AUTO)
Picture has color defects (white does not look white)| Adjust RGB color or select color temperature
The screen resolution needs to be adjusted| Use win 2000/ME/XP Right click anywhere on desktop and select Properties > Settings > Screen Resolution.

Use the silder to adjust the reslution and click Apply

ERROR MESSAGE & POSSIBLE SOLUTIONS

• CABLE NOT CONNECTED:
  • Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws.
  • Check the signal-cable’s connection pins for damage.
• INPUT NOT SUPPORT:
  Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

FACTORY PRESET TIMING TABLE:

(Analog / Digital mode)

| FREQUENCY (KHz)| FREQUENCY (Hz)
---|---|---
1| 640×480 @60Hz| 31.469| 59.94
2| 640×480 @67Hz| 35| 66.667
3| 640×480 @72Hz| 37.861| 72.809
4| 640×480 @75Hz| 37.5| 75
5| 720×400@70Hz| 31.469| 70.087
6| 800×600 @56Hz| 35.156| 56.25
7| 800×600 @60Hz| 37.879| 60.317
8| 800×600 @72Hz| 48.077| 72.188
9| 800×600 @75Hz| 46.875| 75
10| 832×624 @74.6Hz| 49.725| 74.5
11| 1024×768 @60Hz| 48.363| 60.004
12| 1024×768 @70Hz| 56.476| 70.069
13| 1024×768 @75Hz| 60.023| 75.029
14| 1152×864 @75Hz| 67.5| 75
15| 1152×870 @75Hz| 68.681| 75.062
16| 1280×960 @60Hz| 60| 60
17| 1280×1024 @60Hz| 63.981| 60.02
18| 1280×1024 @75Hz| 79.976| 75.025
19| 1400×1050@60Hz| 64.744| 59.948
20| 1400×1050@75Hz| 65.317| 59.978
21| 1600×1200@60Hz| 75.00| 60.00
22| 1600×1200@75Hz| 93.750| 75.00
23| 1680×1050@60Hz| 65.290| 59.954
24| 1680×1050@75Hz| 82.306| 74.892

APPENDIX

SPECIFICATIONS

LCD Panel

| Driving system| TFT Color LCD
---|---|---
Size| 55.88cm(22.0″)
Pixel pitch| 0.282mm(H) x 0.282mm(V)
Video| H-Frequency| 31KHz – 80KHz
V-Frequency| 56 – 75Hz
Display Colors| 16.7M Colors
Maximum Screen Size| Hor. :473.8mm; Ver. :296.1mm
Max. Resolution| 1680 x 1050 @60Hz
Plug & Play| VESA DDC/CI
EPA ENERGY STAR®| ON Mode| ≤49W
Power Saving Mode| ≤2W
OFF Mode| ≤1W
Input Connector| D-Sub

DVI-D (Dual-Input Model)

Power Source| 100~240VAC,47~63HZ
Environmental Considerations| Operating Temp: 5° to 40°C Storage Temp.: -20° to 60°C Operating Humidity: 20% to 80%
Dimensions| 510 (W)×423(H)×202(D) mm

20.07”(W)×16.65”(H)×7.95”(D)

Weight (GW/NW)| 6.7 kg / 4.9 kg

14.8 lb / 10.8 lb

***The above specification is subject to actual product specification and is subject to change without prior notice.

NOTES: The Maximum Resolution will depends on the display card supporting. Related issue can refer to www.hannsg.com FAQ section.

Frequently Asked Questions

What is the recommended screen resolution for Hannspree Hanns.G Hi221D monitor?

The recommended screen resolution is 1680 x 1050 pixels at 60Hz.

How do I adjust the brightness and contrast of the display of Hannspree Hanns.G Hi221D?

You can adjust the brightness and contrast settings through the OSD (On-Screen Display) menu. Press the Menu button on the monitor and navigate to the appropriate settings.

What should I do if the Hannspree Hanns.G Hi221D monitor displays a CABLE NOT CONNECTED error message?

Check that the signal cable is properly connected. Ensure that the connector is securely fastened and that the pins on the cable are not damaged.

How can I change the language of the OSD (On-Screen Display)?

You can change the language of the OSD by accessing the OSD menu. Look for the Language option and select your preferred language.

What is the purpose of the DDC/CI feature in Hannspree Hanns.G Hi221D, and how do I enable or disable it?

DDC/CI (Display Data Channel/Command Interface) allows communication between the monitor and the computer's graphics card. You can usually find the option to enable or disable it in the OSD menu.

The Hannspree Hanns.G Hi221D monitor's power LED is orange, but there is no video or picture. What should I do?

Ensure that your computer is powered on and the video card is properly seated in its slot. Check the monitor's video cable for a secure connection. Test whether your computer is operational by observing the CAPS LOCK LED on the keyboard.

How do I adjust the viewing angle of the Hannspree Hanns.G Hi221D monitor?

You can adjust the viewing angle by tilting the monitor. Hold the stand and adjust it to your preferred angle. The monitor allows adjustment from -5° to 20°.

What should I do if I encounter color defects in my Hannspree Hanns.G Hi221D or if white does not appear correctly?

You can adjust the color settings through the OSD menu. Look for the Color Setting option and make adjustments.

How can I reset the Hannspree Hanns.G Hi221D monitor to its factory default settings?

You can perform a factory reset by accessing the OSD menu and selecting the Factory Reset option. This will erase the current settings and restore the default ones.

Can I switch between analog (D-Sub) and digital (DVI) sources, and how do I do it in Hannspree Hanns.G Hi221D?

Yes, you can switch between analog and digital sources by accessing the Input Setting option in the OSD menu. Select either Analog or Digital, depending on your desired source.

What do I do if the Hannspree Hanns.G Hi221D monitor's image is not centered or sized properly?

You can adjust the pixel frequency CLOCK and PHASE settings through the OSD menu or use the AUTO button for auto-adjustment.

How do I address the issue of a flickering screen during initial use in Hannspree Hanns.G Hi221D?

If the screen flickers during initial use, turn off the monitor's power and then turn it on again to see if the flickering disappears.

Download The Pdf Link:Hannspree Hanns.G Hi221D 22-Inch TFT LCD Monitor User Manual

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>