SONY XS680GS 2 Way Speaker Instructions
- June 15, 2024
- Sony
Table of Contents
SONY XS680GS 2 Way Speaker
Product Information
Specifications
- Speaker Type: Coaxial 2-way
- Tweeter Type: Dome
- Tweeter Size: 2.0 cm (13/16 in)
- Short-term Maximum Power: 230 W
- Rated Power: 38 W
- CTA 2031 RMS Power: 40 W
- Rated Impedance: 4 ohms
- Output Sound Pressure Level: Not specified
- Mass: Woofer – Approx. 700 g (1 lb 9 oz) per speaker
Mounting
Before mounting:
- If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.
Connections
Note: Speaker cord is not supplied.
When releasing the cables, push down on the catch firmly and release them carefully. If excessive force is used, damage to the speaker or cable terminals may result.
FAQ
Q: What is the maximum power of the speaker?
A: The short-term maximum power of the speaker is 230 W.
Q: What is the rated power of the speaker?
A: The rated power of the speaker is 38 W.
Q: What is the impedance of the speaker?
A: The impedance of the speaker is 4 ohms.
Q: How much does each speaker weigh?
A: Each speaker weighs approximately 700 g (1 lb 9 oz).
Dimensions
- A. Reference Point
- B. Reference Plane
- C. Reference Axis
Parts list
Precautions
- Do not continuously use the speaker system beyond the peak power handling capacity.
- Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers.
- Please note the following when installing the units; otherwise malfunction and/or deterioration in sound quality may result.
- Do not touch the diaphragms and/or speaker cones by hand or with tools.
- Do not put your fingers through the holes of the frame.
- Do not drop foreign objects in the units.
- Do not place this product close to medical devices.
- This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.
If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.
Specifications
-
Speaker Coaxial 2 way:
Woofer 16 cm × 20 cm (6 in × 8 in) cone type
Tweeter 2.0 cm (13/16 in) dome type -
Short-term maximum power1 230 W2
-
Rated power 38 W*2
-
CTA 2031 RMS Power 40 W
-
Rated impedance 4 Ω
-
Output sound pressure level 90 dB ± 2 dB (1 W, 1 m)*2
-
Effective frequency range 45 Hz – 24 000 Hz*2
-
Mass Woofer: Approx. 700 g (1 lb 9 oz) per speaker
-
Supplied accessories Parts for installation
Design and specifications are subject to change without notice.
- “Short-term maximum power” may also be referred to as “Peak Power”.
- Testing Condition: IEC 60268-5 (2003-05)
Mounting
Before mounting
A depth of at least 57.5 mm (2 3/8 in) is required to mount the woofer. Measure the depth of the area where you are to mount the speaker, and ensure that the speaker is not obstructing any other components of the car. Keep the followings in mind when choosing a mounting location:
-
Make sure that nothing is obstructing around the mounting location of the door (front or rear) where you are to mount the speaker.
-
A hole for mounting may already be cut out of the inner panel of the door (front or rear). In this case, you need to modify the board only.
-
If you are to mount this speaker system in the door (front or rear), make sure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window mechanism in the door (when you open or close the window), etc.
Also make sure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests, door pockets, lamps or seats etc. -
If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or close the trunk lid), etc.
Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, head rests, center brake lights, inner covers of the rear wipers, curtains or air purifiers, etc.
Connections
Note
- When releasing the cables, push down on the catch firmly and release them carefully.
- If excessive force is used, damage to the speaker or cable terminals may result.
Mounting from the car interior Decide the method ( A , B or C ) to mount the unit depending on the type of the car and the installation location.
- A. When mounting on the door panel
- B. When mounting on the door panel
- C. When mounting on the rear tray
Made in Vietnam
https://www.sony.net/
©2023 Sony Corporation Printed in Vietnam
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>