MASiNGO Burletta C10 Bluetooth Karaoke Machine User Manual
- June 4, 2024
- MASiNGO
Table of Contents
MASiNGO Burletta C10 Bluetooth Karaoke Machine
Congratulations!
You’ve just taken your party game up a notch.
Meet your compact, karaoke buddy – the Burletta C10 from Masingo.
The C10 is on hand for convenient karaoke whenever and wherever you desire.
Its 10-watt speaker, 6 playback modes, 2 microphones, and colorful LEDs turn
your casual fun into seriously good times. Plus, it does double duty for party
announcements.
Choose from Bluetooth, AUX, USB, MicroSD, or FM to fill the room with melody.
Sing out some show tunes with Grandma, blast out some big hits with your pals,
or serenade your sweetheart. Need to take your show on the road? No problem!
This portable party can be carried easily by all ages via shoulder strap or
handle.
Whatever your musical mood, you’ll find the C10 is pitch perfect for any
musical occasion!
Sing on!
Parts & Features
What’s included…
1x Masingo Karaoke Machine
1x Plug-in microphone
1x VHF wireless microphone
1x 2xMicroSD charging cable
1x Shoulder strap
1x Performer’s manual
Machine Diagram Top Control Panel
- Master Volume
- Bass Boost
- Back
- Play/Pause
- Next
- Mode
- LEDS
Machine Diagram Front
- 3.5mm AUX Line-In
- 6.5mm Mic Input
- Charging Indicator Light
- DC5V Charging Port
- Power Switch
- TF Slot (MicroSD)
- USB Slot
Review Before using
1) Keep this manual for future reference.
2) Adhere to all warnings.
3) Keep ventilation openings clear; do not block any of this machine’s
vents/openings.
4) Install and set up the machine according to the manufacturer’s
instructions provided in this manual.
5) Do not install near any heat sources (i.e. radiators, heat registers,
stoves, amplifiers, or any other objects that produce heat).
6) Protect the machine’s power cord. Prevent the power cord from being
walked on or pinched – particularly at the plug, wall outlet, and the
connection to the machine.
7) Unplug the machine during lightning storms or when unused for long
periods of time.
8) Refer all technical services to qualified personnel. Servicing is
required when the machine has been damaged in any way, such as damage to the
power-supply cord or plug, contact with liquid, exposure to moisture or rain,
if the machine has been dropped, or anything else which may cause the machine
to fail to operate normally.
9) Do not force the SD card into its slot. It can only be inserted in one
direction.
If the card does not insert easily, remove it and try reinserting it in the
opposite direction.
10) To maintain peak performance and battery longevity, fully charge the
karaoke machine at least once every three months and before storing it away
for a long period of time.
Quick Start Guide
#1 Charge the machine.
#2 Set up your prefered microphone.
#3 Power on the machine.
#4 Activate your chosen music mode.
#5 Sing your heart out!
Note: See the “Detailed Usage Guide” section of this manual for more information on how to operate your machine.
| Check the machine for damage before each use.
---|---
| Do not use the machine with attachments not approved by the manufacturer.
| Clean and store the machine after each use.
| Do not expose this product to water, moisture, heat, or steam.
Do not place objects filled with liquid on this product.
| When using the machine outdoors, do not use it in wet or very hot weather.
Do not run charging cable through puddles or other moisture.
| Do not expose battery to excessive heat such as sunshine, fire, or other
heat sources to reduce risk of fire or explosion.
Detailed Usage Guide
Machine
How to charge the machine
Plug in the machine’s charging cable into the DC5V (11) machine charging
port on the function board. Connect the machine’s charging cable to your own
compatible DC 5V charging plug, and then carefully insert your plug into a
polarized wall outlet. Be sure to charge fully before each use. The
indicator light (10) will turn on to indicate charging.
How to turn the machine on/ off
Slide the Power (12) switch towards the side labeled On to turn the
machine on.
To turn it off, slide the same switch towards the side labeled Off.
How to operate the LEDs
LEDs will start automatically when the machine is turned on. Click the LED
button (7) on the machine’s function board to change to a different LED
pattern. There are 3 total options.
If the button is clicked once more after cycling through all available LED patterns, the LEDs will turn off. Click the same LED button again to reactivate them.
Microphone
How to connect the wired microphone
Gently but firmly plug the 6.5 mm AUX jack at the end of the wired microphone
into the 6.5mm AUX port (8) on the machine’s function board.
How to install or replace the VHF microphone’s batteries
Screw off the bottom half of the microphone and insert two AA batteries (not
included) into the proper slots. Screw the covering back on, and proceed to
power on the microphone as directed above.
How to turn the microphones on/ off
For both the wireless and the wired microphone, slide the power switch
up to turn the microphone on. Slide the power switch down to turn the
microphone off.
Note: The wireless microphone has an indicator light. If this switch is not pushed all the way up, the indicator light will not turn on, and the microphone will remain off.
How to use PA mode
When there is no music playing, this machine can be used to make PA
announcements. Simply speak into a microphone by ensuring that it is properly
connected as instructed above.
Music
How to set up playback
Your machine has six different playback options: Bluetooth, MicroSD, AUX, USB,
FM, & PA. Each has its own set-up method. See the “Content/Parts’’ section
above for hook-up locations and the relevant subsection below for more
information on how to set up your preferred playback mode.
How to sing karaoke using your machine
1) Find a karaoke track of your preferred song online. Karaoke tracks are
available for thousands of songs through various online karaoke music
services. Many are also available for free on YouTube channels such as “Sing
King,” etc. These karaoke services often include lyrics.
2) Download the track to USB/MicroSD, OR stream it from your device via
Bluetooth/AUX.
3) Set up your prefered playback mode.
4) Rock on!
How to connect to Bluetooth
(ie. playing music from your smart device)
The machine will start in Bluetooth mode. To use this feature, simply search
for the machine name (“Masingo”) under your playback device’s
Bluetooth connection settings and connect as you would any other Bluetooth
device.
Caution: Do not turn your smart device volume to maximum or damage to
speakers may occur. Place your device volume at midrange and then adjust the
volume using the volume control on the machine
(1). You may however use either the controls on your device or the controls on
the machine to play, pause, or switch between tracks.
How to use MicroSD mode (i.e playing music from an SD card)
Plug your MicroSD card into the designated slot ( TF Slot ) (13). Once
inserted, press the Mode button (6) to switch to SD mode and then press
the Play button (4) to begin playing your music. Press the Next (5) or
Back button (3) to change tracks. Press the Play button again to pause a
track.
Note: The Mode button (6) will only cycle through to SD mode if an SD chip is inserted.
If USB or AUX are also connected, the machine may cycle through these as well upon pressing the mode button. Press the Mode button multiple times to cycle through all available modes.
How to use AUX mode
Playing music from an AUX-compatible device (TV, Phone, Tablet, or MP3
player):
When the machine is on, plug an AUX cable into the AUX port (8) on the machine’s function board to activate AUX mode. Then, plug the other end of the adapter into the designated output on your device.
Once connected, press the Mode (6) button to switch to AUX mode. Use the controls on your AUX-compatible device to play, pause, and switch between tracks. The machine’s Play (4) , Back (3) and Next (5) buttons will not function in AUX mode.
Note: The Mode button will only cycle through to AUX mode if the AUX cable is connected.
If USB or MicroSD are also connected, the machine may cycle through these as well upon pressing the Mode button. Press the Mode button multiple times to cycle through all available modes.
Caution: Do not turn your external device volume to maximum or damage to speakers may occur. Place your device volume at midrange and then adjust the volume using the volume control on the C10 machine.
How to start USB mode
Playing music from a USB drive
Plug a USB drive into the USB slot (14). Once connected, press the Mode button (6) to switch to USB mode. Press the Play (4) button to begin playing your music. Press the Next (5) or Back (3) button to change tracks. Press the Play button again to pause the track.
Note: The Mode button will only cycle through to USB mode if a USB storage drive is connected.
If AUX and MicroSD are also connected, the machine may cycle through these as well upon pressing the Mode button. Press the Mode button multiple times to cycle through all available modes.
How to set up and activate FM mode
When the machine is on, press the Mode button (6) and cycle through
available modes until the machine speaker says “FM Mode.”
The first time you activate your machine (or when you are using your machine in a new location) hold down the Play button (4) for 3 seconds to begin scanning for available stations. Do not press any buttons again until the scanning cycle is complete.
Your machine has now stored all available stations. Use the Next (5) and Back (3) buttons to change between FM stations.
How to use multiple playback modes
To use playback modes interchangeably, simply activate each mode according to
the instructions above, then press Mode (6) to switch between the inputs.
How to set up TWS (True Wireless Stereo)
TWS (True Wireless Stereo) allows you to sync with other C10s. For this mode
to work, you will need to have two Burletta C10 machines on hand.
1) Power on both machines.
2) Make sure that neither machine is connected via Bluetooth to any smart
device.
3) In Bluetooth Mode, hold down the Play button (4) for 3 seconds until
you hear a beep. Do this for each machine.
4) Connect music to one of the machines via AUX, USB, or MicroSD.
5) Both machines will now play the same music simultaneously.
Maintenance
How to clean
Turn the machine and microphones off. Unplug the machine’s power cord and
disconnect any AUX, MicroSD, or USB plug-ins.
Gently wipe the outside of the machine using a clean, dry cloth. Keep all
vents, buttons, and openings free of lint and dirt. Do not immerse the machine
in water and do not use any harsh cleaners.
How to store
Charge the machine and microphones so that they are ready for next use. Make
sure that the machine is clean and dry.
Bind the power cord and microphone cord individually and gently with
electrician-approved fasteners. (Note: Do not wrap or fold against the natural
bend of the cords or cable). Do not wrap the cord around the machine. Store
the machine in a cool, dry place away from damaging elements.
For best results, clean and store the machine after each use.
Turn the machine and microphones off. Unplug the machine’s power
Troubleshooting Guide
Problem
|
Solution
---|---
Machine is not turning on| The battery is depleted. Be sure to charge the
machine after each use.
VHF wireless microphone is not turning on| Ensure the power switch is all the
way in the up position and the indicator light is on. (Note: The VHF
microphone has a middle setting called “Mute.” The microphone will not
function in “Mute.”)
If this does not solve the issue, the Microphone battery is low or depleted.
Replace the AA batteries in the microphone.
USB or MicroSD mode is not working| Ensure that the USB drive or MicroSD chip
is inserted properly and that there are readable music files stored on said
drive/chip Ensure that the machine volume is turned to an audible level.
Machine is not playing microphone vocals| Ensure that your chosen microphone
is turned on. (Note: The VHF microphone has a middle setting called “Mute.”
Ensure that it is not in this setting by pushing the power switch all the way
up).
Ensure that the wired microphone is plugged in correctly.
Ensure that the wireless microphone’s batteries are installed correctly and
still have charge.
Ensure that the machine volume is on.
Microphone vocals are echoing excessively| If the echo is excessive, move the
machine speaker further away from the microphones to reduce echo.
Next song is not playing in AUX mode| Please ensure your device’s media player
is set on “play next song” rather than “repeat” or “play one song.”
Play (4) Next (5) and Back (3) buttons are not functioning in AUX
mode| The Play (4) Next (5) and Back (3) buttons on the machine
will not work on AUX mode. Please use the controls on your connected device.
Machine powers on and then shuts down| Battery is low. Please charge the
machine or replace the battery if needed.
No sound is playing from the speaker| Ensure that the volume on the machine
and your device (if applicable) are both turned to an audible level.
Button or knob on the machine is not working properly| Power off the machine
and turn it back on.
TWS mode is not working for Bluetooth mode or FM| TWS works in AUX, USB, or
MicroSD modes.
See the “How to set up TWS (True Wireless Stereo)” section for more
information.
Can’t find audible stations in FM mode| FM mode needs to program in available
stations the first time you use it in a new location.
To do this, activate FM mode and hold down the Play button (4) for 3
seconds. Please wait for the scanning process to complete before you begin
searching for stations with the Next (5) and Back (3) buttons. See the
“How to set up and activate FM mode” for more details.
If any of these issues persist, or if any part of the machine becomes damaged, discontinue use and consult a licensed electrician for repair. Do not attempt to modify or repair the machine yourself. You can also contact our customer service department (see next page).
FCC Warning
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Any Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates uses and
can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will not
occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
– Consult the dealer or an experienced radio/TV technician for help.
The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure condition without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>