MASiNGO Spinto G3 Portable Shark Karaoke Machine User Manual
- June 12, 2024
- MASiNGO
Table of Contents
MASiNGO Spinto G3 Portable Shark Karaoke Machine User Manual
Congratulations!
You’ve just taken your party game up a notch
Whether you’re celebrating with a few friends or with the whole gang— in the comfort of your home or in a big event space—your parties will be peppier with the beautifully designed, deceptively compact Spinto G3 Shark – Karaoke Machine from Masingo.
Choose from Bluetooth, AUX, USB, or MicroSD and get the music going— or simply connect to your TV. Sing out some show tunes with Grandma, blast out some big hits with your pals, or serenade your sweetheart. You can even adjust your volume and vocal effects to enhance your performance. No matter what your skill level, this box of magic is sure to delight vocalists of all ages—from 5 to 125.
Need to send out some announcements during your big bash? No problem! This portable, multi-functional machine doubles as a punchy PA system. Simply turn off the music and speak into the mic for volumeadjustable, crystal-clear announcements. Plus, the contoured speaker grill directs the sound up and out so you can be sure your voice is heard.
When all is said and sung, just turn off the machine and plug the microphones into the convenient, built-in charging docks. In no time at all, you’ll be ready for an encore.
Sing on!
Take note:
Parts & features
What’s included…
- 1 x Masingo Karaoke Machine
- 2 x Rechargeable microphones
- 1 x 3.5 mm AUX cable
- 1 x 3.5 mm AUX – RCA cable
- 1 x Type C charging cable
- 1 x USB charger plug
- 1 x Performer’s manual
Ready, set, sing!
Quick-start guide
- Charge the machine and microphones before each use.
- Turn the machine and microphones on.
- Choose your preferred playback setting.
- Display your lyrics.
- Rock on!
Note: See the “Usage Guide” section of this manual for more information on how to operate your machine.
Do not turn on the microphones while they are charging.
Use caution when charging microphones in docks while machine is unplugged. Battery will deplete quickly.
Clean and store the machine after each use.
Check the machine for damage before each use.
Do not use the machine with attachments not approved by the manufacturer.
Keep the machine away from heat, steam & water.
Let’s begin…
Machine assembly
How to install the shark fins
Installation is quick and easy! Gently attach each of the baby shark’s fins,
one on the top and the other two at its sides. If done correctly, the pieces
should fit easily and snugly. We recommend that you remove these pieces when
transporting the machine to avoid accidental damage. Now you’re all set –
happy singing!
Never miss a note
Detailed usage guide
Machine
How to charge the machine
Connect the USB charger plug or a compatible micro-USB cord into the machine and to a polarized outlet. Be sure to charge fully before each use. The indicator light on the back of the machine will turn on to indicate charging and power.
How to turn the machine on
Turn the Power switch on the back of the machine to the “on” position.
Microphones
How to charge the microphones
Place the microphones in the charging docks on the machineor plug them into a compatible charger using the micro-USB charging cable. Be sure to charge fully before each use. While charging, the top bar of the battery icon on the display will flash, then stop flashing when the battery is full.
How to turn the microphones on
Remove the microphones from the charging docks and turn them on using the power button on the handle. They will automatically connect to the machine.
Note: Microphones will automatically turn off after 15 minutes of no use.
How to set up the microphone
The A-B button controls both the microphone’s channel and the microphone’s frequency band.
IMPORTANT: When using both microphones simultaneously, each microphone must be set to a different frequency band (that is, one must be set to CHA while the other one is set to CHB). If both microphones are set to the same frequency band, the microphone audio may cut in and out.
Changing the Frequency Band: The frequency band is represented by the letters CHA or CHB in the bottom left corner of the LED display. To change the microphone’s frequency band, hold the A-B button for one second until the desired band is reached. One microphone MUST be set to CHA while the other MUST be set to CHB.
Changing the Microphone Channel: Channel is represented on the microphone LED screen as a number from CH1 to CH8. To cycle through possible channels, click the A-B button until the desired channel is reached. Unlike frequency bands, having both mics on the same numbered channel will not negatively impact performance.
How to customize your microphone vocal mix
To adjust the volume of your singing over the music, click the Volume +/- buttons up or down until it reaches your preferred volume.
To modify the reverb effect on your singing, click the Echo +/- buttons up or down as desired. Use the EQ button to choose between 5 different equalizer selections.
Music
How to set up playback
Your machine has 5 different playback options: Bluetooth, SD, AUX, USB, PA.
Each has its own hookup location (see diagram in the “Contents/Parts” section)
and setup method (see the “Music” subsection below). See the aforementioned
sections for more information on how to set up your preferred playback mode.
If desired, you can also place your phone or tablet in the mount on the front of the machine to display your song lyrics.
How to connect to Bluetooth
Playing music from your device:
This machine will be ready to connect via Bluetooth as soon as you turn it on. To use this feature, simply search for the machine name (“MASINGO”) under your playback device’s Bluetooth connection settings and click to connect.
How to use SD mode
Playing music from an SD card:
Plug your MicroSD card into the designated slot on the back of the machine. Playback will begin immediately. Use operation instructions in the “Music” subsection below to adjust settings.
How to start AUX mode
Playing music from an AUX-compatible device:
Plug the AUX or AUX-RCA cable into the designated slot on the back of the machine to activate AUX mode. Then, plug the other end of the adapter into the designated inputs on your device and play your music just as you normally would.
How to start USB mode
Playing music from a USB drive:
Plug a USB stick into the designated slot on the back of the machine. Your music will begin playing automatically. You can also use this slot to charge your phone using a compatible USB cable. Use operation instructions in the “Music” subsection below to adjust settings.
How to use PA mode
When there is no music playing, this machine will automatically start PA mode. Simply use the microphones as directed in the above subsection.
How to use multiple playback modes
To use playback modes interchangeably, simply activate each mode according to the instructions above, then click the Mode button to switch between the inputs.
How to customize your music
Karaoke mode allows you to instantaneously convert a song into a karaoke version by muting the vocals. In order to do so:
- Connect your device via Bluetooth as instructed in the “How to connect to Bluetooth” section.
- Press the “Karaoke Mode” button on the machine’s function board until the song’s vocals are muted. To restore vocals, simply press the “Karaoke Mode” button again.
How to connect to an external media source
Playing music from a MP3 player, phone, or TV:
Plug the AUX or AUX-RCA cable into the designated slot on the back of the machine. Then, plug in your preferred compatible device into the other end of the adapter and use the machine as indicated.
Maintenance
How to clean
Turn the machine and microphones off and unplug from the wall and from the machine speaker.
Gently wipe the outside of the machine using a clean, dry cloth. Keep all vents, buttons, and openings free of lint and dirt. Do not immerse the machine in water and do not use any harsh cleaners.
How to store
Charge the machine and microphones so that they are ready for next use.
Make sure that the machine is clean and dry. Bind the unplugged cord gently with an electrician-approved fastener. Do not wrap the cord around the machine.
Store the machine in a cool, dry place away from damaging elements.
For best results, clean and store the machine after each use.
When things go flat
Troubleshooting
| Problem | Solution |
|---|---|
| Battery icon on the microphone screen is blinkingMicrophone will not turn on |
The microphone battery is low or depleted. Charge before use
Machine will not turn on| The battery is depleted. Be sure to charge the
machine after each use and, when charging the microphones in the charging
docks, keep the machine plugged in.
Machine is not playing microphone vocals| Ensure that each microphone is on a
separate frequency band. This is represented by CHA or CHB in the bottom left
corner of the microphone LED screen. (To switch channels, hold down the A-B
button for one second.) Microphones will not work properly unless one mic is
set to CHA while the other mic is set to CHB. After 15 minutes of inactivity,
the microphones will turn of
If any of these issues persist or if any part of the machine becomes damaged, discontinue use and consult a licensed electrician for repair. Do not attempt to modify or repair the machine yourself. You can also contact our customer service department (see back cover).
FCC
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including interference that may cause undesired operation
We’re here for you.
If you encounter any issues with your machine or have any questions or
comments, please feel free to contact us. Have your warranty information on
hand for faster service.
844-262-7464
support@masingo.com
www.masingo.com
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>