SONY XS-690GS 2 Way Speaker Instructions

SONY XS-690GS 2 Way Speaker

Product Information

Specifications

• * XS-690GS Speaker

  • Coaxial 2 way
  • Tweeter : 2.5 cm (1 in) dome type
  • Short-term maximum power : 420 W
  • Rated power : 50 W
  • CTA 2031 RMS Power : 60 W
  • Rated impedance : 4 Ω
  • Output sound pressure level
  • Mass: Woofer – Approx. 1,000 g (2 lb 3 oz) per speaker
  • Supplied accessories : Parts for installation
• • XS-160GS Speaker
    • Coaxial 2 way
    • Woofer : 16.5 cm (6 1/2 in) cone type
    • Tweeter : 2.0 cm (13/16 in) dome type
    • Short-term maximum power : 250 W
    • Rated power : 40 W
    • CTA 2031 RMS Power : 45 W
    • Rated impedance : 4 Ω
    • Output sound pressure level
    • Mass: Woofer – Approx. 650 g (1 lb 7 oz) per speaker
    • Supplied accessories : Parts for installation

• XS-130GS Speaker

  • Coaxial 2 way
  • Woofer : 13 cm (5 1/4 in) cone type
  • Tweeter : 2.0 cm (13/16 in) dome type
  • Short-term maximum power : 230 W
  • Rated power : 30 W
  • CTA 2031 RMS Power : 35 W
  • Rated impedance : 4 Ω
  • Output sound pressure level
  • Mass : Woofer – Approx. 550 g (1 lb 3 oz) per speaker
  • Supplied accessories : Parts for installation

Product Usage Instructions

Installation Precautions

• If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.
• Bila anda tidak dapat menemukan lokasi pemasangan yang tepat, hubungi dealer mobil anda atau dealer Sony anda yang terdekat sebelum memasang.
• Jika lokasi pemasangan yang sesuai tidak dapat dicari, dapatkan nasihat pengedar kereta anda ataupun pengedar Sony terdekat sebelum pemasangan.

Mounting Instructions

1. Choose a suitable location for mounting the speakers in your car.
2. If needed, consult with your car or Sony dealer for guidance.
3. Ensure that the mounting location is secure and will not interfere with any car components or wiring.
4. Using the supplied accessories, securely mount the speakers in the chosen location.
5. Make sure the speakers are properly aligned and tightly secured.

FAQ

• Q: Can I install these speakers in any car?
  A: These speakers are designed to be compatible with most cars. However, it is recommended to consult with your car or Sony dealer to ensure compatibility and proper installation.

• Q: Can I mount the speakers myself?
  A: Yes, you can mount the speakers yourself. However, if you are unsure or inexperienced, it is recommended to consult with your car or Sony dealer for proper guidance and assistance.

Dimensions

Precautions

• Do not continuously use the speaker system beyond the peak power handling capacity.
• Keep recorded tapes, watches, and personal credit cards using magnetic coding away from the speaker system to protect them from damage caused by the magnets in the speakers.
• Please note the following when installing the units; otherwise malfunction and/or deterioration in sound quality may result.
  • Do not touch the diaphragms and/or speaker cones by hand or with tools.
  • Do not put your fingers through the holes of the frame.
  • Do not drop foreign objects in the units.
• Do not place this product close to medical devices.
  • This product (including accessories) has magnet(s) which may interfere with pacemakers, programmable shunt valves for hydrocephalus treatment, or other medical devices. Do not place this product close to persons who use such medical devices. Consult your doctor before using this product if you use any such medical device.

If you cannot find an appropriate mounting location, consult your car dealer or your nearest Sony dealer before mounting.

Specifications

XS-690GS

• Speaker : Coaxial 2 way : Woofer 16 cm x 24 cm (6 in x 9 in) cone type Tweeter 2.5 cm (1 in) dome type
• *Short-term maximum power1* : 420 W2
• Rated power : 50 W*2
• CTA 2031 RMS Power : 60 W
• Rated impedance :4 Ω
• Output sound pressure level : 90 dB ≤ 2 dB (1 W, 1 m)*2
• Effective frequency range :40 Hz – 24 000 Hz*2
• Mass : Woofer : Approx. 1000 g (2 1b 3 oz) per speaker
• Supplied accessories :   Parts for installation

XS-160GS

• Speaker : Coaxial 2 way : Woofer 16.5 cm (6 ½ in) cone type Tweeter 2.0 cm (13/16 in) dome type
• *Short-term maximum power1* : 250 W2
• Rated power :  40 W*2
• CTA 2031 RMS Power :45 W
• Rated impedance ::4 Ω
• Output sound pressure level : 89 dB # 2 dB (1 W, 1 m)*2
• Effective frequency range :45 Hz – 24 000 Hz*2
• Mass : Woofer : Approx. 650 g (1 lb 7 oz) per speaker
• Supplied accessories : Parts for installation

XS-130GS

• Speaker : Coaxial 2 way : Woofer 13 cm (5 % in) cone type Tweeter 2.0 cm (13/16 in) dome type
• *Short-term maximum power1* :230 W2
• Rated power : 30 W*2
• CTA 2031 RMS Power : 35 W
• Rated impedance :4 Ω
• Output sound pressure level :49 89 dB = 2 dB (1 W, 1 m)*2
• Effective frequency range : 50 Hz – 24 000 Hz*2
• Mass : Woofer : Approx. 550 g (1 lb 3 oz) per speaker
• Supplied accessories: Parts for installation

Design and specifications are subject to change without notice.

•  “Short-term maximum power” may also be referred to as “Peak Power”.
• 2 Testing Condition : IEC 60268-5 (2003-05)

Mounting

Before mounting
A depth of at least 73 mm (2 7/8 in)1/46.3 mm (1 7/8 in)2/45.3 mm (1 13/16 in)*3 is required for flush mounting. Measure the depth of the area where you are to mount the speaker, and ensure that the speaker is not obstructing any other components of the car. Keep the followings in mind when choosing a mounting location

• Make sure that nothing is obstructing around the mounting location of the door (front or rear) or the rear tray where you are to mount the speaker.
• A hole for mounting may already be cut out of the inner panel of the door (front or rear) or the rear tray. In this case, you need to modify the board only.
• If you are to mount this speaker system in the door (front or rear), make sure that the speaker terminals, frame or magnet do not interfere with any inner parts, such as the window mechanism in the door (when you open or close the window), etc. Also make sure that the speaker grille does not touch any inner fittings, such as the window cranks, door handles, arm rests, door pockets, lamps or seats etc.
• If you are to mount this speaker system in the rear tray, make sure that the speaker terminals, frame or magnet do not touch any inner parts of the car, such as the torsion bar springs (when you open or close the trunk lid), etc.

Also make sure that the speaker grille does not touch any inner fittings, such as seat belts, head rests, center brake lights, inner covers of the rear wipers, curtains or air purifiers, etc.

Parts list

Mounting from the car interior
Mark the 4 bolt holes and make them 3.2 mm (5/32 in) in diameter.

1. Note
   When releasing 2, push down on the catch firmly and release 2 carefully.
   If excessive force is used, damage to the speaker or terminal cable may result.

2. White cord — Left speaker
   Gray cord — Right speaker

DOOR (FRONT/REAR)
Mark the 4 bolt holes and make them 3.2 mm (5/32 in) in diameter.
Unit : mm (in)

1. Note
   When releasing 2, push down on the catch firmly and release 2 carefully.
   If excessive force is used, damage to the speaker or terminal cable may result.

2. White cord — Left speaker
   Gray cord — Right speaker

Flat mounting (installed flush with the surface of the dash)

Unit : mm (in)

• This speaker can be made to fit in almost any type of car by removing the mounting tabs.
  Use clippers or pliers, etc. to cut or snap two of the mounting tabs off so that it is even with the edge of the speaker frame as illustrated.

Note
After removing the mounting tabs, handle the speaker frame with care, as the edges may be sharp.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>