Govee H606A Glide Hexagon Light Panels Ultra User Manual

Govee H606A Glide Hexagon Light Panels Ultra

PRODUCT INFORMATION

Model : H606A Govee Glide Hexagon Light Panels Ultra(10pcs)

Caution:

• This product is ideally used on smooth surfaces (e.g. glass, wood, etc); not suitable for uneven, bumpy or wet surfaces (e.g. brick, stucco, etc).
• It is not recommended to install the product on the ceiling.
• Clean and ensure the surface is totally dry before sticking the product on.
• When installing the light panel, press its central point against the wall for more than 30s in order to maximize the adhesion.
• If there is any dirt on the product’s surface, please use the provided alcohol pad to clean it.

Safety Instructions
Read and follow all the safety instructions:

• The light panel is not waterproof. Avoid exposing it to splashing or dripping water.
• The operating temperature should be within – 10° to 40°C (14° to 104°F).
• The light panel’s internal light source cannot be replaced. If it breaks, you must replace it.
• Do not allow children to install the light panel alone.
• Avoid placing the light panel near heat sources.
• Do not install the light panel with a dimming driver.
• Avoid placing the light panel near potentially dangerous sources (e.g., candles, liquid-filled objects).

Introduction

Thank you for choosing Govee Glide Hexagon Light Panels Ultra! The light frames and surfaces of these three-dimensional light panels can be controlled separately orsimultaneously, allowing you to create unlimited light combinations and enjoy a cool game lighting experience. The flexible design of the light panels creates a large space for your imagination. The appearance adopts the IML mold injection surface treatment method, creating an aesthetic you’ll find in any e-sports arena and making the ideal decoration for your gaming room.

What You Get

At a Glance

Note : Ensure the mic is facing up during use.

Pairing Your Device with Govee Home App

What you need:

• A Wi-Fi router supporting the 2.4GHz and 802.11 b/g/n bands. 5GHz is not supported.
• A smartphone or tablet running iOS 8.0 (or above) or Android 4.3 (or above).

Pairing instructions

1. Download the Govee Home App from the App Store (iOS devices) or Google Play (Android devices).
2. Open the app, tap the “+” icon in the top right corner, and search for “H606A”.
3. Tap the device icon and follow the onscreen instructions to complete the pairing.

Specifications

Troubleshooting

Cannot connect to the Govee Home App

• Check if the light panel is powered on.
• Check if Bluetooth on the smartphone is enabled, or try connecting with another smartphone.
• When connecting for the first time, ensure the smartphone is near the light panel. If the connection error still exists, please delete the connected light panel from “My Device” on the app. Reconnect to Govee Home App by following the instructions provided previously.

Wi-Fi disconnected or failed to connect

• Check if the light panel is powered on.
• Do not skip the Wi-Fi connection steps during the light panel pairing process.
• Ensure your Wi-Fi router is 2.4GHz (5GHz is not supported).
• Ensure you entered the correct Wi-Fi password during the Wi-Fi set up process.
• Try connecting the light panel with a smartphone hotspot to check if your home network is working properly.
• Shorten the distance between the light panel and the Wi-Fi router to less than 1m, then reconnect.

Cannot connect to Alexa or Google Assistant

• Ensure the Wi-Fi connection is stable and working properly.
• Go to “User Guide” on the app Settings page to pair the light panel again.

Can multiple users control one light panel?

• Each light panel can only be controlled by one account.
• If multiple users want to manage the same light panel, ensure they all use the same account.

Customer Service

Warranty : 12-Month Limited Warranty
Support : Lifetime Technical Support
Email : support@govee.com
Official Website : www.govee.com
 @Govee  @govee_official @govee.official   @Goveeofficial    @Govee.smarthome

• Do not interconnect parts of this lighting chain with parts of another manufacturer’s lighting chain.
• Interconnection shall be made only by the use of the supplied connectors. Any open ends must be sealed off before use.
• Replace failed lamps immediately by lamps of the same type as delivered or of a type offered hu the manufacturer

FCC and ISED Canada Statement

This device complies with Part 15 of the FCC Rules and Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning : Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

NOTE : This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.

These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.
2. Increase the separation between the equipment and the receiver.
3. Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
4. Consult the dealer or an experienced radio/TV technician for help.

FCC and IC Radiation Exposure Statement
This equipment complies with FCC and IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20cm between the radiator & your body. This Class B digital apparatus complies with Canadian ICES-005.

Responsible party
(this contact information is only for FCC matters) :

• Name : GOVEE MOMENTS(US) TRADING LIMITED
• Address : 2501 Chatham Rd Suite R Springfield IL 62704
• Email : certification@govee.com
  Contact information : https://www.govee.com/support

FOR INDOOR USE ONLY
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by Shenzhen Qianyan Technology LTD. The trademark Govee has been authorized to Shenzhen Qianyan Technology LTD. Copyright ©2021 Shenzhen Qianyan Technology LTD. All Rights Reserved.

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>