ADUB NG-PTA-60W LED Post Top Area Light Owner’s Manual

: June 15, 2024
: ADUB

Table of Contents

ADUB NG-PTA-60W LED Post Top Area Light
PRODUCT INFORMATION
Product Usage Instructions
FAQ
Features
Applications
DIMENSION
PHOTOMETRIC DATA
Installation Instructions
INSTALLATION INSTRUCTION
APPLICATION
PACKAGING
Read User Manual Online (PDF format)
Download This Manual (PDF format)

ADUB NG-PTA-60W LED Post Top Area Light

PRODUCT INFORMATION

Product Specifications

Available Wattage: 60W, 80W, 100W, 150W
IP65 Waterproof
Dust Free
Energy Saving (85% At Least)
ETL cETL DLC Approved
CCT Selectable options: 3000K, 4000K, or 5000K
140LM/W SMD3030 Chips
5 Years Warranty
Universal Voltage: AC120~277V
120 Degree Beam Angle
High Power Factor (>0.9)
Low THD Driver
Available With Photocell/Sensor
High Intensity and Stability
No Maintenance Cost
Anti-Shock, Anti-moisture, No Glare, No Strobe Light – Protecting Your Eyes

Applications
The LED Post Top Area Lighting series can be widely used in city expressways, trunk roads, factories, schools, gardens, parking lots, public parks, etc.

Product Usage Instructions

How to adjust the colour temperature of the light:
Warm Notice: Please turn off the light before adjusting CCT. Only turn on the light after you finish the CCT selection.

Unscrew the cap of the slotted screw.
Select the proper colour temperature (3000K, 4000K, or 5000K).
Screw the cap back after CCT selection.

Installation
Follow the steps below for easy installation:

Ensure the power is turned off before installation.
Mount the LED Post Top Area Light securely on a suitable pole or fixture using appropriate mounting hardware.
Connect the electrical wires according to the wiring diagram provided in the user manual. Ensure proper connections and insulation.
Once the electrical connections are made, turn on the power and verify that the light is functioning properly.

FAQ

What is the warranty period for the LED Post Top Area Light?
The LED Post Top Area Light comes with a 5-year warranty.
Can I adjust the colour temperature after installation?
Yes, you can adjust the colour temperature by following the instructions provided in the user manual. However, please ensure that the light is turned off before making any adjustments.
Is the LED Post Top Area Light waterproof?
Yes, the LED Post Top Area Light is IP65 waterproof, making it suitable for outdoor use.
What is the beam angle of the LED Post Top Area Light?
The LED Post Top Area Light has a 120-degree beam angle.

Features

60~150W Available
IP65 Waterproof Dust Free
Energy Saving 85% At Least
ETL cETL DLC Approved
3000K 4000K or 5000K CCT Selectable options
140LM/W SMD3030 Chips
5 Years Warranty
Universal Voltage AC120~277V
120 Degree Beam Angle
High Power Factor>0.9, Low THD Driver
Available With Photocell/Sensor
Using High-Quality LED Chips
High Intensity and Stability, No Maintenance Cost
Anti-shock, Anti-moisture, No glare, No Strobe
Protecting Your Eyes.

Applications

LED Post Top Area Lighting series can be widely used in City expressways, trunk roads, factories, schools, gardens, parking lots, public parks etc.

DIMENSION

PHOTOMETRIC DATA

Installation Instructions

Warning: Do cut off the electrical source to avoid electrical shock and endanger life safety before installation.

Step 1: Pass the leads of the lights through the stem, then fix the stem with the lamp.
Step 2: Pass the leads of the light through the tenon pole, then use screws to fix it.
Step 3: Electrical connections :
- connect the black wire to the line
- connect the white wire to the neutral
- connect the green or green/yellow wire to the ground
- And good waterproof processing.
Step 4: On the lamps and lanterns hang up the safety rope, and then install the lamp on the mast.
Install height from floor higher than 1.2m.