KALAHOL FWD-001 LED RGBIC Corner Floor Lamp User Manual
- June 15, 2024
- KALAHOL
Table of Contents
MANUAL
Please read this manual carefully before using the product,and keep if for records properly
Product Description
The RGB corner floor lamp light is a lighting device controlled by a mobile APP to enter interactive interface.using plus buttons control mode realizes the switching of phantom lights to meet the user’s distance Manipulation.The function of each button is clear,and the APP interactive interface is simple and generous.
Product Features
- Mobile APP control
- Timed
- Music mode
- USE interface
Product Parameter
Product Name ：LED RGBIC Corner Floor Lamp
Model：FWD-001
Working Voltage ：5V
Working current :1A
Rated power:5W±0.5W
Remote control distance:7-10m
Download and install “Smart life” APP
https://smartapp.tuya.com/tuyasmart|
https://smartapp.tuya.com/smartlife
---|---
“Tuya Smart” QR code| “Smart life” QR code
Scan QR code to download APP or search “Smart life”on GooglePlay or APP store
Download it.
This APP support Android 4.3 and above & ios 8.0 and above.
Note: The router must be 2.4GHz WIFI
Remote Control Instructions
| In any state, press to turn off and on the controller.
---|---
| Pressing this key in the dynamic mode increases + decreases the speed of the
dynamic mode—a total of 10 levels. In the music rhythm mode, the rhythm
sensitivity can be adjusted.
| Press this button in the power-on state to switch the dynamic mode plus +
minus a total of 121 changing effects.
| Press this button in the power-on state to automatically cycle through all
the pattern effects.
| Press this key to adjust the brightness in the power-on state minus – plus +
a total of 10 pole dimming.
| Child lock: Press once so the remote control buttons are locked, and press
once to unlock all remote control buttons can be used.
| In the power-on state, press the button 6 times to turn on the white light.
When setting the RGB line sequence, for example, press the red button until it
is red/the green button until it is green/the blue button until it is
blue/set and press the off button to save In the boot on it. When setting the
points, press the button 6 times in the power-on state to light up the
white light. After the white light is turned on, press the SPEED plus and
minus button to add and subtract points by 1 point, and then press the
MODE plus and minus button to get 3 points. Add 3 points and add points to the
points you need, then turn off the computer and save it, then turn
it on and you can use it.
| Press this key in the power-on state: static red static green static blue
static yellow COLOR+static color plus COLOR-static color minus
| Press this button in the power-on state to time 1 hour 2 hours 3 hours
| Pressing this key in the power-on state is the addition and subtraction keys
of the music mode, a total of 8 different music effects.
| Press and hold the button in the power-on state to switch the machine on and
off, and press the button in the dynamic mode to increase and decrease the
mode speed – a total of 10 levels. Under the static color, there are 10 levels
of brightness addition and subtraction.
(Press this key in music mode to adjust the sensitivity of the microphone)
---|---
MODE+ & MODE-| Press this button in the power-on state to switch the dynamic
mode plus + minus a total of 121 changing effects.
| Long press in any state is the music rhythm mode, a total of 8 types; short
press is a static color, a total of 20 types.
Connection method and precautions
After connection the loaders,then turn on the power and make sure are no foreign objects between the connecting wires
APP(Smart life) Connection instructions and download QR code
Step 1.Make the light strip into the distribution network model.
- Long press the infrared remote control “ON”button for about 7 seconds,the green indication light fast flash to enter the distribution network model
- Open the APP（Smart life），turn on the Wi-Fi and “Smart life” APP on your phone,Make sure Wi-Fi is correct.The Wi-Fi controller be automatic detected (Figure 1 and Figure 2 )
- You can DIY your light in this mode(Figure 3)
- You can adjust the scene mode according to your needs.(Figure 4)
- Music rhythm(Figure 5)
- You can plan your time according to your needs.The length of the lighting strip can be adjusted(Figure 6 /Figure 7/Figure 8)
- Support for third party voice assistant control,such as Google Assistant ,Amazon Alexa(Figure 9)
Failure analysis solution
| The fault phenomenon | Cause analysis | The solution |
|---|---|---|
| Not bright | 1. The switching power supply is dead |
2. The positive and negative poles of the power supply are connected
negatively
3. Wrong or insecure connection| 1. Check the switching power supply
2. Correct it
3. Check the wiring
Wrong color| 4. RGB static color setting error| 4.Set RGB static colors
Mode unchanged| 5.The speed is set too slowly| 5.Please press the speed button
to speed up
Can’t remote control| 6.Batteries
7.Out of control distance| 6.Replace the battery
7.Reduce remote control distance
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>