SAFAVIEH LIGHTING TBL4024A 32 Inch Bedroom Living Room Home Office Desk Nightstand Table Lamp Installation Guide
- June 15, 2024
- SAFAVIEH LIGHTING
Table of Contents
Model# TBL4024A
Product Dimensions: 15″X15″ X 32″H
CARE AND MAINTENANCE
Unplug lamps before using any cleaning solutions. Dust shades with a feather duster or with an appropriate vacuum-brush attachment. Wipe with a soft, dry cloth and clean lamp bases with the methods appropriate to the material. Avoid the use of chemicals and household cleaners as they may damage the finish.
NOTICE & IMPORTANT SAFETY INSTRUCTIONS
- Please make sure that you have all parts indicated before you begin assembly of this item
- This item should be assembled on a soft surface to prevent scratching the finish during assembly
- To reduce the risk of fire, electrical shock or injury to persons or property, please follow the guideline below for safe use and installation
*The external flexible cable or cord of this luminaire cannot be replaced;
If the cord is damaged, the luminaire shall be destroyed
**This portable lamp has a polarized plug (one blade is wider than the other) as a safety feature to reduce the risk of electric shock. this plug will fit in a polarized outlet only one way. if the plug does not fit fully in the outlet, reverse the plug, if it still does not fit, contact a qualified electrician. never use with an extension cord unless the plug can be fully inserted. do not attempt to defeat this safety feature.
Part List and Hardware List
| PIECE | DESCRIPTION | PICTURE | QUANTITY |
|---|---|---|---|
| A | Lamp base | 1X | |
| B | Lamp Body | 1X | |
| C | Saddle | 1X | |
| D | Socket | 1X | |
| E | Harp | 1X | |
| F | Shade | 1X | |
| G | Finial | 1X | |
| H | Bulb | 1X |
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare
parts with package contents list and hardware contents list. If any part is
missing or damaged, do not attempt to assemble the product.
Estimated Assembly Time: 6 minutes.
PLEASE USE ON/OFF TYPE”A” BULB MAX 100-WATT OR CFL BULB MAX 23-WATT
THERE IS CFL 13-WATT BULB IN THE BOX
Step 1
Pull power cord to connect the Neck (B) to the Base (A).
Screw the lamp body (B) onto the lamp base (A)
Be careful not to twist the power cord and tighten securely Step2
Insert the harp (E) into the saddle (C).
Put the shade(F) on the harp(E), then tighten the finial (G) into the harp (E)
Insert the bulb(H) into the socket(D). Step3
Put the light on a level surface to check if everything is stable.
ENJOY YOUR LAMP