JBL Wave 200 TWS Manual: User Guide and Instructions
- June 4, 2024
- JBL
Table of Contents
The JBL Wave 200 TWS Wireless Earbuds are a premium audio accessory that offers an immersive listening experience. Whether you’re on-the-go or at home, these earbuds deliver crystal-clear sound quality with a comfortable fit. To help you get the most out of your JBL Wave 200 TWS earbuds, this user guide provides detailed instructions on how to use them. From how to wear them properly to connecting them to your device via Bluetooth, this guide covers everything you need to know to start using your earbuds right away. Additionally, the guide includes technical specifications and frequently asked questions to help you troubleshoot any issues you may encounter. Whether you’re a seasoned audio enthusiast or a first-time user of wireless earbuds, this guide is an essential tool for maximizing your JBL Wave 200 TWS experience.
JBL WAVE 200 TWS Wireless Earbuds
WHAT’S IN THE BOX
how to wear
FIRST TIME USE
power on & CONNECT
DUAL CONNECT
BUTTON COMMAND
- Stereo Mode
- Mono Mode
power off
Manual Controls
- Connect to a new Bluetooth device
- RECONNECT LEFT & RIGHT
- Factory reset
Charging
led behaviors
TECH SPEC
- Model: WAVE200TWS
- Driver size: 8 mm/ 0.315” Dynamic Driver
- Power supply: 5 V 1 A
- Weight: 47.5 g/ 0.105 lbs
- Headset battery type: Lithium-ion Battery (48 mAh/ 3.7 V)
- Charging case battery type: Lithium-ion Battery(500 mAh/ 3.7 V)
- Charging time: 2 hrs from empty
- Music playtime with BT on: up to 5 hrs
- Frequency response: 20 Hz – 20 kHz
- Impedance: 16 ohm
- Sensitivity: 108dB SPL@1 kHz
- Maximum SPL: 93 dB
- Microphone sensitivity: -38 dBV/Pa @1 kHz
- Bluetooth version: 5.0
- Bluetooth profile version: A2DP V1.3, AVRCP V1.6, HFP V1.7
- Bluetooth transmitter frequency range: 2.400 GHz – 2.4835 GHz
- Bluetooth transmitter power: 12 dBm
- Bluetooth transmitter modulation: GFSK, π/4 QPSK, 8DPSK
- Maximum operation temperature: 45°C
TO PROLONG BATTERY LIFESPAN, FULLY CHARGE AT LEAST ONCE EVERY 3 MONTHS. BATTERY LIFE VARIES BY USE AND SETTING.
The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc., and any use of such marks by HARMAN International Industries, Incorporated is under license. Other trademarks and trade names are those of their respective owners.
FAQS
Does the JBL TWS earbuds work with Apple products?
Yes, the JBL TWS earbuds work with Apple products.
What is the difference between the JBL TWS and the JBL T450BT?
The JBL TWS is a wireless headset while the T450BT is a wireless headphone. The TWS has an in-line remote control and microphone, while the T450BT has a built-in remote control and microphone.
How long does it take to charge the TWS earbuds?
It takes approximately 2 hours to fully charge the TWS earbuds.
How long do the TWS earbuds last on a single charge?
The TWS earbuds have up to 5 hours of music playback time on a single charge.
How do I turn on/off the TWS earbuds?
To turn on/off the TWS earbuds, press and hold down on either one of the volume buttons for 3 seconds. The power light will illuminate when turned on and will blink red when turned off.
What do I do if my headphones are not connecting to my device?
First make sure that your device is within range of your headphones (10 meters). If you are still experiencing issues connecting your headphones, please try resetting your headphones by holding down both volume buttons for 5 seconds until you hear a tone indicating that your headphones have been reset. If you continue to experience problems connecting your headphones, please contact our customer care team at 1-800-898-9020 or email us at customerservice@harmanaudio.com.
How do I connect my TWS JBL earbuds?
Start searching for new Bluetooth devices and select your JBL earbuds from the dropdown menu (For Android this will likely be in available devices). Your earbud should now be connected to your phone and once you remove your other earbud it will automatically connect to the other
How do I know when my JBL earbuds are fully charged?
Full charge: The LED indicator on the right earbuds turns off. Low battery: Only one LED indicator on the charging box blinking white. Charging: Two LED indicators on the charging box flashing white. Full charge: All of the LED indicators on the charging box turns off.
How do I reset my JBL earbuds?
Press and hold the ‘Volume +’ and ‘Volume –’ buttons until the LED indicator light begins to blink. This should be about 15 seconds. Once the LED light begins to blink, the pairing settings have been reset. Now, turn the Bluetooth on your device on again.
Why is one side of my JBL earbuds not working?
When the two earpieces begin to pair, sometimes the left side is unable to automatically pair together, leaving you to suffer one-sided audio if you don’t remedy the issue. Take out the right earbud from the charging case. It will begin attempting to pair, you can discern this from a blinking blue light.
Why is my wireless left earbud not working?
One side of your wireless earbuds may not be working because your first time setting the earbuds up might not have run properly. Other reasons include a bug (which requires a manual reset), needing to be reconnected to your other device using Bluetooth and actually having damage to the hardware.
How do I reset my earbuds?
Place both earbuds in the charging case.
Keep the case lid open and hold the earbuds near your Android or iOS device.
Scroll down to locate and select “About Earbuds.”
Choose the “Reset” option.
VIDEO
References
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>