MiraScreen B09FSFCVVN HDMI Dongle 4K Wireless HDMI Display Adapter Streaming Miracast WIFI HDMI Adapter Instruction Manual
- June 15, 2024
- MiraScreen
Table of Contents
MiraScreen B09FSFCVVN HDMI Dongle 4K Wireless HDMI Display Adapter
Streaming Miracast WIFI HDMI Adapter
Product Information
The Wireless HDMI Dongle is a device that allows you to wirelessly connect
your iPhone, iPad, Android phone or tablet, and Windows laptop or PC to your
TV.
It enables you to mirror your device’s screen onto the TV, allowing you to
enjoy videos, photos, games, and more on a bigger screen.
Specifications
- Power Supply: 5V/1A USB charger
- Connection: Wi-Fi
- Compatibility: Apple devices (iPhone, iPad), Android devices (phones, tablets), Windows devices (laptops, PCs)
Product Usage Instructions
Installation
The installation process may vary depending on the device you are using. Please follow the instructions below for your specific device:
For Apple Devices
- Plug all the cables accordingly into the device.
- Connect the USB cable to a 5V/1A charger for power supply.
- You will see a blue screen on your TV.
- Connect your iPhone/iPad to the MiraScreen’s WiFi. The WiFi name and password can be found on the blue screen.
- Swipe down/up on your iPhone/iPad and tap on AirPlay Mirroring.
- Select MiraScreen as the target and you’re done.
For Android Devices
- Plug all the cables accordingly into the device.
- Connect the USB cable to a 5V/1A charger for power supply.
- You will see a blue screen on your TV.
- Find the Cast function on your phone/tablet.
- Select “Enable wireless display” and tap on MiraScreen as the target.
- Click “Done” to complete the installation.
For Windows Devices
- Plug all the cables accordingly into the device.
- Connect the USB cable to a 5V/1A charger for power supply.
- You will see a blue screen on your TV.
- Find the Project function in the lower right window of your laptop/PC.
- Choose the mode you prefer (Duplicate for mirror mode or Extend for extend mode).
Note: For Apple devices, after completing the above steps, your iPhone/iPad screen will be cast on the TV, but the Internet connection will be your iPhone’s Cellular Data. If you want to use your home’s WiFi to watch videos via the dongle, please follow these additional steps:
- Use your iPhone/iPad browser to access the IP address shown below the blue screen: http://192.168.203.1
- Click on “Internet” and choose your home’s router. Enter the password if required.
- Open the WLAN setting of your iPhone/iPad and connect your device to your home’s Wi-Fi.
- Tap on AirPlay Mirroring, select MiraScreen as the target, and you’re done.
Note: After setting up for the first time, you don’t have to connect the dongle every time. Simply plug and play.
FAQ about Wireless HDMI Dongle
-
Q: Why can’t my laptop/PC find a connection with this dongle?
- A: Please check if your device has Bluetooth and Wi-Fi functions.
- If not, you will need a Wi-Fi receiver to establish the connection.
-
Q: Do I have to reconnect the Wi-Fi display dongle every time or will it automatically reconnect?
- A: The Wireless HDMI Dongle will automatically reconnect after the initial connection setup.
-
Q: Why does my screen go black?
- A: Please ensure that you have plugged the USB cable into a 5V/1A USB charger for sufficient power supply. Do not plug the USB cable into the TV’s USB port as it may cause an insufficient power supply.
-
Q: Why are the connections frequently interrupted? Why can’t I use this dongle to watch any video apps, including YouTube?
A: Please try the following method: -
Connect the dongle properly.
-
Use your phone’s browser to search for the address shown on the blue screen: http://192.168.203.1
-
Click on “Compatibility Mode” and turn it ON.
Thankyouforpurchasingfromourstore. Please contact our Email if you have any questions about this item: support-eu@soclltech.com .
- This code is the connection ways we make, Don’t worry, please! You can use our wireless HDMI dongle via this install video:)
How to Get Great Results with Your New Wireless HDMI Dongle?
How to install this Wireless HDMI Dongle?
- The installation is related to the device you use.
- Plug all the cables accordingly into the device (Please don’t forget to connect the USB cable to a 5V/1A charger for power supply.)
- You would see a blue screen on TV.
| For Apple Devices | For Android Devices | For Windows Devices |
|---|
3. Connect your iPhone / iPad to the MiraScreen’s WiFi. (Please check the
WiFi name and password on the blue screen.) Swipe down/up on your iPhone and
tap on “AirPlay Mirroring”, select “MiraScreen” as the target, and then done.
NOTE: the Internet is your iPhone’s Cellular Data if you want to
use wifi, please check the following steps:)
| 3. Find the “Cast” function on your phone/tablet.| 3. Find the “Project”
function in the lower right window of your laptop / PC.
4. Select “Enable wireless display”, tap on “MiraScreen” as a target, then
done.
| （ Here is an example of a Windows 10 system ） .
4. Choose the mode you like. “Duplicate” for mirror mode, or “Extend” for
extended mode.
Note For Apple devices:
- After the above steps, you have successfully connected this dongle with your iPhone /iPad, and the phone screen can be cast on TV. But the Internet is your iPhone’s Cellular Data.
- If you want to use your home’s WiFi to watch videos via this dongle, please continue to finish the following steps:
- Use your iPhone/iPad browser to access the IP address shown on the below of the blue screen ( http://192.168.203.1)
- Click “Internet”—Choose your home’s router—Enter password
- Open the WLAN setting of your iPhone/ iPad, and connect your device to your home’s Wi-Fi.
- Tap on AirPlay Mirroring, select MiraScreen as a target, then be done.
Note: After setting it the first time, you don’t have to connect it every
time, just plug and play.
You can also find the operation videos on YouTube
- For Android: https://youtu.be/9K3Udl2Au.kc
- For IOS: https://youtu.be/NU4tekcT.06k
- For Window: https://youtu.be/BOnAHQuyv.us
FAQ about Wireless HDMI Dongle
Q: Why my laptop/PC can’t find a connection with this dongle?
- A: Please check if your device has Bluetooth and Wi-Fi functions. If not, then it would need a Wi-Fi receiver to set up the connection.
Q: Why there is only sound or image when watching Netflix, Amazon Video, Disney+, Sky Go, or other similar apps?
- A: If you are using Apple devices, please note that because of “HDCP” video copyright protection, Apple devices, this product is not compatible with those subscription-based apps that need paying to watch.
If you are using Android or Windows devices, but you cannot watch those apps mentioned above, please try the following method.
1. Download the “Google Home” app.
2. After connecting the product well, turn on your phone and search the WiFi
name: MiraScreen XXX, then enter Password: 12345678 (Please check the WiFi
name and password on the blue screen.)
3. Open your browser and search this website: 192.168.203.1 (You can find the
website at the bottom of the blue screen.)
4. Click “Internet”—Find your home’s WiFi name—Enter password.
5. Open the WLAN setting of your phone, and connect to your home’s WiFi.
6. Open the “Google Home” app, and select “MiraScreen XXX” as the target.
Then you could successfully see your phone showing on the TV screen:)
Q: Do I have to reconnect the Wi-Fi display dongle every time or will it automatically reconnect?
- A: The Wireless HDMI Dongle will automatically reconnect after the connection is finished the first time.
Q: Why does my screen go black?
- A: Please check whether you have plugged the USB cable into the USB charger for the power supply.
- Please don’t plug the USB cable into the TV’s USB Port, because this might cause an insufficient power supply.
- Please connect the USB cable to a 5V/1A USB charger.
Q: Why are the connections frequently interrupted？
Why I could not use this dongle to watch any video apps, including YouTube?
- A: Please try the following method.
1. Connect this item well
2. Use your phone’s browser to search the address
http://192.168.203.1（shows on the blue screen）
3. Click “Compatibility Mode”—– Turn it “ON”
(If there is no option for “Compatibility Mode”, please upgrade it. The upgrade steps are as follows.)
1. Use your phone’s browser to search the address http://192.168.203.1（shows on the
blue screen）
2. Click “Upgrade”—–You will see a pop-up window, then choose to upgrade it.
(sometimes the pop-up window would appear automatically, just choose to
upgrade it)
3. Please wait for the downloading.
4. After the upgrade, the item would restart. Then please connect it again.
5. After connecting the item well, use your phone’s browser to search the
address http://192.168.203.1
6. Click “Compatibility Mode”—– Turn it “ON”
Contact with Us
If you have any questions about our products, please feel free to contact us via email: support-eu@soclltech.com
Documents / Resources
|
MiraScreen B09FSFCVVN HDMI Dongle 4K Wireless HDMI Display Adapter Streaming
Miracast WIFI HDMI
Adapter
[pdf] Instruction Manual
B09FSFCVVN HDMI Dongle 4K Wireless HDMI Display Adapter Streaming Miracast
WIFI HDMI Adapter, B09FSFCVVN, HDMI Dongle 4K Wireless HDMI Display Adapter
Streaming Miracast WIFI HDMI Adapter, Wireless HDMI Display Adapter Streaming
Miracast IFI HDMI Adapter, HDMI Display Adapter Streaming Miracast WIFI HDMI
Adapter, Adapter Streaming Miracast WIFI HDMI Adapter, Streaming Miracast WIFI
HDMI Adapter, Miracast WIFI HDMI Adapter, WIFI HDMI Adapter, HDMI Adapter,
Adapter
---|---
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>