ANKER SOLIX F1500 Portable Power Station User Manual
- June 15, 2024
- ANKER SOLIX
Table of Contents
ANKER SOLIX F1500 Portable Power Station
What’s in the Box
Overview
- AC Output Ports
- Car Socket
- XT-60
- DC Input Port
- USB Ports
- AC Input Port
Recharging Your Power Station
AC recharging (1 000W Max)
Recharge your Power Station by connecting to a wall outlet with the AC
charging cable.
Solar panel recharging (600W Max)
Recharge your Power Station by connecting up to 3 Anker solar panels in
parallel with a solar charging cable.
Car recharging (120W Max)
Recharge your Power Station by connecting to a car’s output port with the car
charging cable. When your portable power station only has 1 % battery
remaining, the Remaining Battery indicators will flicker to remind you to
recharge the product.
Powering Your Devices
AC charging
Press the AC button and connect your devices to the AC output ports.
USB charging
Connect your devices to the USB ports.
Car socket charging
Turn on the car socket and connect your devices to start charging.
Uninterruptible Power Supply (UPS)
To use the UPS function, connect your Power Station to a wall outlet with the
AC charging cable, then press the button and connect your devices via the AC
output ports.
Power Saving Mode
Switching on the power saving mode prevents wasting power by automatically
turning off the Power Station once all your devices are fully charged.
Switching off the power-saving mode will enable stable charging over an
extended period, such as for timelapse photography or for sleeping with a CPAP
machine.
The Anker App for Smart Control
You can remotely control your power station using the Anker App. Please
download the app and its user manual by scanning this QR code. Connect the
device to a network before using the app for the first time. After connecting
successfully, you can connect your devices off-grid.
Ambient light
Press the button once to turn on the ambient light. and press again up to 2
times to switch between brightness levels.
SOS mode
Press and hold the button for 2 seconds to turn on SOS mode.
LCD Screen Guide
- Current| Output Rower
- Current Input Power
- Press the loT button once to turn on Bluetooth and Wi-Fi, and connect your devices through the app when this icon appears on the screen.
- Press the loT button for 2 seconds to turn off Bluetooth and Wi-Fi.
- Press the loT button for 7 seconds to reset Bluetooth and Wi-Fi.
- USB-A Output Port
- USB-C Output Port
- Car Charging
- AC Charge and Voltage Frequency
- Low-Temperature Alert When this icon shows, stop using the power station until the icon disappears.
- High-Temperature Alert When this icon shows, stop using the power station and let it cool down until the icon disappears.
- Overload Warning This icon appears when a port is overloaded. The port will be turned off to avoid any damage. Please remove the device causing overload.
- Estimated Time to Fully Recharge Estimated Time for Battery to Deplete Remaining Battery for Power Station
- Power Saving Mode
Trouble Shooting
AC recharging failure
When AC recharging is unavailable, check to see if the overload protection
switch is switched on. If so, press it down to reset. and then recharging can
resume.
AC charging failure
- n-32V:::10A;
- 32V-60V:::12.SA(600WMax)
- 100-120Vac
- (50Hz/60Hz) ONLY!
If AC charging is unavailable, the connected devices may exceed 1800W. Try unplugging one or more of the connected devices to see if this resolves the issue.
Resetting your Power Station
If your Power Station isn’t working correctly, press the reset button (located
on the front of the product) for 1 second for a factory reset. If the Power
Station still doesn’t work, please visit
support@anker.com
FAQs
Why does the Power Station's battery drain even when no devices are connected?
When the AC and Car Socket cont rol button is turned on, even if no devices are being charged, there will still be a certain amount of no-load power consumption. To avoid this, make sure the AC and Car Socket charging buttons is off or turn on the power saving mode when you're not using the Power Station.
What's the max power output of the AC output ports?
The AC output ports can deliver a maximum of 1800W to connected devices
Can I recharge the product while charging connected devices?
Yes.
Can this product power a CPAP machine?
Yes, but make sure to turn off the power-saving mode first.
What kind of solar charger can charge this product?
Any 11-60V solar charger with an XT-60 female connector.
Specifications
Attention
Not permitted on aircraft
IMPORTANT SAFETY INSTRUCTIONS
When using this product, basic precautions should always be followed,
including the following: Read all the instructions before using the product.
- To reduce the risk of injury, close supervision is necessary when the product is used near children.
- Do not put your fingers or hands into the product.
- Do not expose the product to rain or snow.
- Use of a power supply or charger not recommended or sold by the product manufacturer may result in a risk of fire or injury to persons.
- To reduce the risk of damage to the electric plug and cord, pull the plug rather than the cord when disconnecting the product.
- Do not use the product over its output rating. Overload outputs above the rating may result in a risk of fire or injury to persons.
- Do not use a product that is damaged or modified. Damaged or modified batteries may exhibit unpredictable behavior resulting in fire. explosion or risk of injury.
- Do not operate the product with a damaged cord or plug, or a damaged output cable.
- Do not disassemble the product. Take it to a qualified service person when service or repair is required. Incorrect reassembly may result in a risk of fire or electric shock.
- Do not be exposed to fire or high temperatures. Exposure to fire or temperatures above 130°C may cause an explosion.
- To reduce the risk of electric shock, unplug the power pack from the outlet before attempting any instructed servicing.
- Have servicing performed by a qualified repair person using only identical replacement parts. This will ensure that the safety of the product is maintained.
- When charging a device, the product may feel warm, this is a normal operating condition and should not be cause for concern. When charging the internal battery, work in a well-ventilated area and do not restrict ventilation in any way.
- Do not clean the product with harmful chemicals or detergents.
- Misuse, dropping or excessive force may cause product damage.
- When disposing of secondary cells or batteries, keep cells or batteries of different electrochemical systems separate from each other.
- CAUTION: Risk of explosion if the battery is replaced by an incorrect one.
- Disposal of a battery into a fire or a hot oven. or mechanically crushing or cutting off a battery, which can result in an explosion;
- Leaving a battery in an extremely high-temperature environment can result in an explosion or leakage of flammable liquid or gas;
- A battery subjected to extremely low air pressure may cause an explosion or leakage of flammable liquid or gas:
- Unplug the AC power cable to disconnect it from the line voltage.
WARNING: GROUNDING INSTRUCTIONS
This product must be grounded. In the event of malfunction or breakdown,
grounding provides a path of least resistance for electrical current to reduce
the risk of electric shock. This product is equipped with a cord having an
equipment grounding conductor and a grounding plug. The plug must be plugged
into an outlet that is properly installed and grounded by all local codes and
ordinances.
WARNING – Improper connection of the equipment grounding conductor may
result in an electric shock. Check with a qualified electrician if you are in
doubt as to whether the product is properly grounded. Do not modify the plug
provided with the product – if it does not fit the outlet. Have a proper
outlet installed by a qualified electrician.
Storage and Maintenance instructions
- Store the product between 32°F-104°F (0°C-40°C). Avoid exposing the product to rain or using the product in a humid environment.
- To preserve the battery lifespan. charge to 100% after using. If you plan to store your power station. recharge to 100% every 3 months.
- Keep the product on a flat surface when using. charging, and storing. ..
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference. and (2.) this device must accept any interference received, including interference that may cause undesired operation.
Warning: Changes or modifications not expressly approved by the party
responsible for compliance could void the user’s authority to operate the
equipment.
Note: This equipment has been tested and found to comply with the limits
for a Class 8 digital device. under Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation.
This equipment generates. uses. and can radiate radio frequency energy and, if not installed and used by the instructions. may cause harmful interference to radio communications. However. there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception. which can be determined by turning the equipment off and on. the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/ TV technician for help.
The following importer is the responsible party.
Company Name: Fantasia Trading LLC
Address: 5350 Ontario Mills Pkwy, Suite 100. Ontario. CA 91764
Telephone:+ 1-800-988-7973
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by
Bluetooth SIG. Inc. and any use of such marks by Anker Innovations Limited is
under license. Other trademarks and trade names are those of their respective
owners.
IC Statement
This device contains licence-exempt transmitter(s)/receiver(s) that comply
with Innovation. Science and Economic Development Canada’s licence-exempt
RSS(s). Operation is subject to the following two conditions: This device may
not cause interference. This device must accept any interference. including
interference that may cause undesired operation of the device. This digital
apparatus complies with CAN ICES-003 (B)/NMB-003 (8)
RF Exposure Compliance Statement
This equipment complies with the FCC/IC radiation exposure limits set forth
for an uncontrolled environment. This equipment should be installed and
operated with a minimum distance of 20 cm between the radiator and your body.
This symbol indicates that this product shall not be treated as household
waste. Instead, it shall be handed over to the applicable collection point for
the recycling of electrical and electronic equipment.
Medical equipment that directly affects human life. Equipment that may result in personal injury (such as equipment directly related to the operation and control of aircraft, ships, railroads, elevators, etc., or equipment that may be subject to constant vibration, such as automotive and marine equipment). The product is not for use in high-risk activities. The product is not designed or intended for use in hazardous environments requiring fail-safe performance, or for use in any circumstance in which the failure of the product could lead directly to death, personal injury, severe physical or property damage, or that would affect the operation or safety of any medical or life support device (collectively, “High-Risk Activities”). Anker expressly disclaims any express or implied warranty of fitness for High-Risk Activities. Anker does not authorize the use of any product in any High-Risk Activities. Any such use is improper and is a misuse of the product.
Customer Service
- FR: Service Client
- US/CA/UK/DE/ JP: support@anker.com
- MEA: support.mea@anker.com
- CN: CED-CN@anker.com
- US/CA: + 1 (800)988 7973
- UK: +44(0)1604 936 200
- DE: +49(0)69 9579 7960 +49 (800) 0002522(Anker SOLIX)
- JP: +81 03 4455 7823
- UAE: +971 8000 320 817
- KSA: +966 8008 500 030
- Kuwait: +965 2206 9086
- Egypt: +20 8000 000 826
- AU: +61 3 8331 4800
- TR: +90(850)460 1414
- RU: +8(800)511 8623
- CN: +86 400 0550 036
- KR: +82 02-1661-9246
- IN: +91 1800 3138 831
- Middle East & Africa: +971 529 750 842
For FAQs and more information, please visit: anker.com/supportFor tutorial videos, FAQs, manuals, and more information, please visit https://support.anker.com Or scan the QR code below:
Warranty Card
Register and activate your warranty and priority customer service.
Anker Portable Power Station’s Warranty Policy
All Anker portable power stations purchased on AnkerDirect and Anker
authorized resellers come with a limited warranty (“warranty”) as set out
below. By using an Anker portable power station, you are agreeing to be bound
by the terms of the Anker limited warranty. We provide a 5-year limited
warranty for purchases made on AnkerDirect and Anker authorized resellers. The
warranty period starts from the date of purchase. Anker:s limited warranty is
restricted to the country of purchase. The limited warranty is void on items
taken outside the country they were originally bought in or shipped to
directly from an authorized online purchase.
Exclusions and Limitations
Not covered under warranty:
- Products that are damaged or modified.
- Products operated with a damaged cord, plug, or output cable.
- Products that are disassembled.
- Products that are cleaned with harmful chemicals or detergents.
- Non-quality related issues (after 30 days of purchase).
- Products purchased from unauthorized resellers.
- Products without sufficient proof of purchase.
- Products that have been refunded.
- Products with an expired warranty.
- Lost, stolen or complimentary items.
- Damage from outside sources.
- Repairs through 3rd parties.
- Damage from misuse of products (including, but not limited to falls, use of the product over its output rating, exposure of the product to rain or snow, extremely low air pressure, and extreme temperatures).
- Purchases from illegitimate resources.
- Batteries that are damaged when not used for a long time or not properly maintained according to the user manual.
Anker is Not Liable For:
- loss of data incurred from the use of Anker products.
- Returning personal items sent to Anker.
- When returning items with a prepaid shipping label provided by Anker, Anker takes responsibility for any damage or loss incurred in transit. When returning items for non-quality issues, the buyer assumes responsibility for any damage or loss incurred in transit. Anker does not provide refunds for items damaged in transit due to non-quality-related warranty claims.
For warranty claims, you can send an email to
- US/CA/UK/DE/ JP: support@anker.com
- MEA: support.mea@anker.com
- CN: CED-CN@anker.com
- Or you can call us at:
- US/CA:+ 1 800-988-7973 UK: +44 (0) 1604 936 200 DE: +49 (0) 69 9579 7960
- UAE: +971 8000 320 817 KSA: +966 8008 500 030 Kuwait: +965 2206 9086
- AU: +61 3 8331 4800 TR: +90 (850) 460 1414 RU: +8 (800) 511 8623
- JP: +81 03 4455 7823
- Egypt: +20 8000 000 826
- CN: +86 400 0550 036
- KR: +82 02-1661-9246 IN: +91 1800 3138831 Middle East & Africa: +971 520 750 842
This page is attached to the Anker warranty page, and Anker reserves the right to final interpretation of the content. Register Your Anker PowerHouse Today
Why Register?
- Hassle-Free Warranty: Confirm the 5-year warranty for your Anker PowerHouse.
- Fast Customer Service: Enjoy exclusive customer service and get what you need quickly.
- Receive the Latest News: Get exclusive first looks at new products and instant updates on official events.
- Scan the QR code below to enter the smart self-service page for more information about your PowerHouse.
Why Registering Matters
Just scan and register to activate your 5-year warranty with priority customer
service. Scan the QR code below to enter the smart self-service page for more
information about your PowerHouse.
51005003905 V02
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>