BRASS MONKEY GH1560 DC Ice Maker User Manual

BRASS MONKEY GH1560 DC Ice Maker

FEATURES

• High-efficiency and energy-saving DC compressor which is robust and durable.

• DC12V/24V or AC 100-240V with an optional mains to DC adapter.

• Fast icing: making small size ice in 5 minutes, big size ice in 7 minutes. (based on 25°C or 77° F room temperature).

• Easy-To-Serve: Ice scoop included to easily fill cups and glasses.

• Removable Ice Basket: 1.5 L capacity.

• Control panel with LED indicator lights.

• Under large ice mode, the ice cube 23mm diameter;
  Under small ice mode, the ice cube 18mm diameter.

• Intelligent car battery protection system: cut out @10.1 V, cut in @11 .4V.

BOX CONTENTS

• 1 x Portable DC ICE MAKER
• 1 x 12/24V Car Cigarette Power Lead
• 1 x Ice Basket
• 1 x Ice Scoop
• 1 x User Manual

SPECIFICATIONS

• Input Voltage:                               12/24VDC, (To power from mains use an optional 240V AC to 12VDC power adapter)
• Average Power Consumption: 60W
• Rated Current:                         1.2A@11 0V; 0.5A@240V (By optional AC adpater) 5.0A@12V; 2.5A @24V
• Refrigerant :                                  R134a
• Insulation:                               100% CFC & HFC free PU Foam insulation
• Ice shape:                                       Bullet shape
• Ice making cycle 1st time:         10 Mins
• Ice making cycle > 1:                    5-6 mins/ 9 samll size ice cubes
• Ice making cycle > 1:                     7-9 mins/ 9 large size ice cubes
• Ice capacity:                                  10kg ice per 24 hrs.
• Water tank capacity:                 1.6 liters
• Ice basket capacity:               0.35 kg
• Ice cubes qty per cycle:           9 pcs

Note: The ice making performance was based on 25 degree ambient temperature. If ambient temperature gets higher, the time for each ice making cycle will be longer.

FEATURES

• The installation of DC power sources in a boat must be handled by a qualified electrician
• Make sure to connect power to the suitable voltage socket
• No electrical devices are to be used inside the product
• The product can be powered on only after being unpacked and put on a flat level surface for over 6 hours
• Operation angle: As there is water inside, please keep the ice maker on flat surface when in operation.
• Product must be well ventilated. Ensure there is a minimum of 200mm clearance at the back, and 100mm around the sides
• The product should be in a well-ventilated space, away from heat sources. Try to avoid direct exposure to sunlight
• Keep product stable
• When there is water inside the tank, do not turn the product upside down to empty. Dry the water, do not soak in water
• Do not put metal in the air inlet vent, outlet vent, or gap
• Do not connect with power except 12/24VDC, or the 240VAC to 12VDC power adapter (optional)
• Do not soak the product in water or wash with water
• The product should not be repaired. If there is any issues please consult the place of purchase
• Turn off the product before cleaning to avoid electric shocks or other issues
• Keep product away from wet or humid places

OPERATION

Steps for first use

• Before starting the device for the first time, you should clean it inside and outside with a damp cloth for hygienic reasons .
• Allow one hour for the refrigerant fluid to settle before plugging the cord into an electrical outlet for the first time.

Steps for usual use

• Open the clear lid to remove the Ice Basket and pour water into the water reservoir. Keep the water level below the MAX level mark. If water levels exceed the MAX level mark, drain any excess water by removing the water drain plug;

• After power on, the ice maker will enter standby mode, and the indicator displays orange;
  Touch for the first time to switch to large ice mode, and the indicator will flash green;
  Touch for the second time to switch to small ice mode, and the indicator will flash blue;
  Touch for the third time, it will return to the standby mode, and the indicator will turn orange again;

• Repeat above steps to select your desired ice mode;

• In standby mode, the indicator is always on; when making ice, the indicator will flash;

when the basket is full, the device will beep and stop; when there is water shortage, the indicator will turn red and the buzzer will beep every 10 seconds.

COMPONENTS

CLEANING & MAINTENANCE

Cleaning:

• Unplug the device first to avoid electric shock.
• Remove the ice basket, then clean the ice basket and ice scoop using warm, soapy water, and a soft cloth. Wipe dry with a non-abrasive, dry towel.
• Clean the interior and exterior of the unit using a warm (soapy) damp non-abrasive cloth.
• Drain the interior water by unplugging the water drain plug on the bottom of the device. Do not soak the device in water and do not wash it directly.
• Dry the interior and exterior with a soft, non-abrasive cloth.

Storage
If the device will not be in use for a long time, please follow these instructions:

• Turn the device off and remove the plug.
• Completely drain the water from the water reservoir.
• Keep the water drain open.
• Put the device in a cool and dry place.
  1. Do not wash the product with water or soak.
  2. Please disconnect from power before cleaning the product to avoid electrical shock.
  3. Drain the product simply by removing the plug at the bottom.
  4. Clean it with a soft wet cloth.

If you will not use the product for a long period of time, ensure you:

1. Turn it off and disconnect from power.
2. Remove everything from inside.
3. Drain any remaining water by removing the drain plug, then wipe all internal surfaces with a soft cloth to ensure that they are clean and dry.
4. Keep it stored away from wet or humid places.

TROUBLESHOOTING

Read User Manual Online (PDF format)

Download This Manual (PDF format)

Download this manual  >>