BOSCH AL 18V-20 Power For System Instruction Manual

June 15, 2024
Bosch

BOSCH AL 18V-20 Power For System

BOSCH-AL-18V-20-Power-For-System-PRODUCT

Product Information

Specifications

  • Model: AL 1810 CV
  • Charging current: II 1.0 A
  • Battery charging voltage (automatic voltage detection): AL 18V-20 / II

Description

The Bosch Power Tools AL 1810 CV is a battery charger designed for charging rechargeable Bosch Li-ion batteries or PBA 18V POWER FOR ALL system batteries.

Product Usage Instructions

Safety Instructions

Before using the charger, please read and follow these safety instructions:

  • Only use the charger in enclosed spaces and avoid exposing it to wet conditions, as water entering the charger can increase the risk of electric shock.
  • Keep the charger clean to prevent any dirt that may pose a risk of electric shock.
  • Before use, always check the charger, including the cable and plug, for any damage. If any damage is found, do not use the charger and have it repaired by Bosch or an authorized after-sales service center using original replacement parts. Damaged chargers, cables, and plugs can increase the risk of electric shock.
  • Avoid operating the charger on easily ignited surfaces or in flammable environments, as the charger may heat up during operation and pose a risk of fire.
  • Ensure that the ventilation slots of the charger are not covered to prevent overheating and malfunction.
  • Only recharge with the charger specified by the manufacturer. Using a charger that is not suitable for the battery pack can create a risk of fire.
  • In case of damage or improper use of the battery, vapors may be emitted. Ensure the area is well-ventilated and seek medical attention if adverse effects are experienced. The vapors may irritate the respiratory system.
  • Under abusive conditions, liquid may be ejected from the battery. Avoid contact and flush with water if accidental contact occurs. Seek medical help if liquid contacts the eyes. Liquid ejected from the battery may cause irritation or burns.

Product Usage Instructions

To use the Bosch Power Tools AL 1810 CV battery charger, please follow these steps:

  1. Ensure that the charger is placed in an enclosed space and not exposed to wet conditions.
  2. Keep the charger clean to prevent dirt accumulation.
  3. Before each use, inspect the charger, cable, and plug for any damage. If any damage is found, do not use the charger and have it repaired by Bosch or an authorized after-sales service center.
  4. Connect the charger to a suitable power outlet.
  5. Insert the rechargeable Bosch Li-ion battery or PBA 18V POWER FOR ALL system battery into the charger.
  6. The charger will automatically detect the battery voltage and start the charging process.
  7. Monitor the charging process and ensure that the ventilation slots of the charger are not covered to prevent overheating.
  8. Once the battery is fully charged, remove it from the charger for use.

Frequently Asked Questions

  • Q: Can I use the charger in wet conditions?
    • A: No, the charger should only be used in enclosed spaces and should not be exposed to wet conditions. Water entering the charger can increase the risk of electric shock.
  • Q: What should I do if I discover any damage to the charger?
    • A: If you discover any damage to the charger, including the cable and plug, do not use it. Have it repaired by Bosch or an authorized after-sales service center using original replacement parts.
  • Q: Can I use the charger with a different battery pack?
    • A: No, the charger should only be used with the rechargeable Bosch Li-ion batteries or PBA 18V POWER FOR ALL system batteries specified by the manufacturer. Using a charger that is not suitable for the battery pack may create a risk of fire.
  • Q: What should I do if liquid is ejected from the battery?
    • A: If liquid is ejected from the battery, avoid contact and flush with water if accidental contact occurs. Seek medical help if liquid contacts the eyes.

Safety instructions

Read all the safety and general instructions. Failure to observe the safety and general instructions may result in electric shock, fire and/or serious injury.

Store these instructions in a safe place.
Only use the charger if you can fully evaluate all functions and carry them out without restrictions, or if you have received corresponding instructions.

  • This charger is not intended for use by children or persons with physical, sensory or mental limitations or a lack of experience or knowledge. This charger can be used by children aged 8 or older and by persons who have physical, sensory or mental limitations or a lack of experience or knowledge if a person responsible for their safety supervises them or has instructed them in the safe operation of the charger and they understand the associated dangers. Otherwise, there is a risk of operating errors and injuries.
  • Supervise children during use, cleaning and maintenance. This will ensure that children do not play with the charger.
  • Only charge Bosch Li-ion batteries or PBA 18V POWER FOR ALL system batteries with a capacity of 1.5 Ah. The battery voltage must match the battery charging voltage of the charger. Do not charge any non-rechargeable batteries. Otherwise there is a risk of fire and explosion.
  • Only use the charger in enclosed spaces and do not expose it to wet conditions. Water entering a charger increases the risk of electric shock.
  • Keep the charger clean. Dirt poses a risk of electric shock.
  • Always check the charge, including the cable and plug, before use. Stop using the charger if you discover any damage. Do not open the charger yourself, and have it repaired only by Bosch or by an authorised after-sales service centre using only original replacement parts. Damaged chargers, cables and plugs increase the risk of electric shock.
  • Do not operate the charger on an easily ignited surface (e.g. paper, textiles, etc.) or in a flammable environment. There is a risk of fire due to the charger heating up during operation.
  • Do not cover the ventilation slots of the charger. Otherwise, the charger may overheat and no long function properly.
  • Recharge only with the charger specified by the manufacturer. A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack.
  • In case of damage and improper use of the battery, vapours may also be emitted. Ensure the area is well-ventilated and seek medical attention should you experience any adverse effects. The vapours may irritate the respiratory system.
  • Under abusive conditions, liquid may be ejected from the battery; avoid contact. If contact accidentally occurs, flush with water. If liquid contacts eyes, additionally seek medical help. Liquid ejected from the battery may cause irritation or burns.

Products sold in GB only

Your product is fitted with an BS 1363/A approved electric plug with internal fuse (ASTA approved to BS 1362). If the plug is not suitable for your socket outlets, it should be cut off and an appropriate plug fitted in its place by an authorised customer service agent. The replacement plug should have the same fuse rating as the original plug. The severed plug must be disposed of to avoid a possible shock hazard and should never be inserted into a mains socket elsewhere.

Product description and specifications

Intended use

The battery charger is intended for charging the rechargeable Bosch Li-ion batteries or PBA 18V POWER FOR ALL system batteries.

Product Features

The numbering of the product features refers to the representation of the charger in the images.

BOSCH-AL-18V-20-Power-For-System-FIG-3

  1. Charging slot
  2. Green battery charge indicator

Technical Data

Battery charger AL 1810 CV AL 18V-20
Protection class / II / II
--- --- ---
Charging current A) 1.0 A 2.0 A
Battery charging voltage (automatic voltage detection) 14.4–18 V 14.4–18 V

A) Depends on temperature and rechargeable battery type

Charging process

  • Pay attention to the mains voltage. The voltage of the power source must match the voltage specified on the rating plate of the charger.

The charging process begins as soon as the mains plug for the charger is inserted into the mains socket and the battery is inserted into the charging bay (1).
The charging process is only possible when the temperature of the battery is within the permitted charging temperature range (0–45 °C).

For more information, you can access the online operating instructions at www .bosch-pt.com/manuals

Troubleshooting

Battery is not being charged

Battery is not being charged and the battery charge indicator (2) is lit up continuously.

  • Cause: The charger has identified an internal error
  • Corrective measure: Ensure that all batteries are fully inserted. Remove the mains plug and reinsert. If the error occurs again, have the charger checked by an authorised after-sales service centre for Bosch power tools.

Indicators do not light up

None of the indicators are lighting up, battery will not be charged.

  • Cause: Plug socket, mains cable or battery charger defective
  • Corrective measure: Check the mains voltage. If necessary, have the charger checked by an authorised after-sales service centre.

Maintenance and Service

Maintenance and Cleaning

In order to avoid safety hazards, if the power supply cord needs to be replaced, this must be done by Bosch or by an after-sales service centre that is authorised to repair Bosch power tools.

After-Sales Service and Application Service

  • Our after-sales service responds to your questions concerning maintenance and repair of your product as well as spare parts.
  • You can find explosion drawings and information on spare parts at: www.bosch-pt.com
  • The Bosch product use advice team will be happy to help you with any questions about our products and their accessories. In all correspondence and spare parts orders, please always include the 10‑digit article number given on the nameplate of the product.

Great Britain

Disposal

  • Chargers, accessories and packaging should be recycled in an environmentally friendly manner.
  • Do not dispose of chargers along with household waste.

Only for EU countries

  • According to the European Directive 2012/19/EU on Waste Electrical and Electronic Equipment and its implementation into national law, chargers that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.
  • If disposed incorrectly, waste electrical and electronic equipment may have harmful effects on the environment and human health, due to the potential presence of hazardous substances.

Only for United Kingdom:

  • According to The Waste Electrical and Electronic Equipment Regulations 2013 (SI 2013/3113) (as amended), products that are no longer usable must be collected separately and disposed of in an environmentally friendly manner.

Scan for more information

Robert Bosch Power Tools GmbH

1 609 92A 80M (2022.08) DOC / 62

References

Read User Manual Online (PDF format)

Loading......

Download This Manual (PDF format)

Download this manual  >>

Related Manuals