Quanyin DV68 Bone Conduction Wireless Headset User Manual
- June 15, 2024
- Quanyin
Table of Contents
Quanyin DV68 Bone Conduction Wireless Headset
Product Information
- Specifications
- Model: 7 RGB
- FCC Compliance: Part 15
- Interference Tolerance: Accepts any interference received
- RF Exposure: Meets general RF exposure requirements
- Usage Conditions: Portable exposure condition without restriction
Product Usage Instructions
- FCC Warning
- This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
- To correct interference, follow these measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
- NOTE: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.
- FAQ (Frequently Asked Questions)
- Q: What is the model of the device?
- A: The model of the device is 7 RGB.
- Q: What are the FCC compliance rules for this device?
- A: The device complies with Part 15 of the FCC Rules.
- Q: Can the device tolerate interference?
- A: Yes, the device must accept any interference received.
- Q: Can I use the device in portable exposure conditions without any restrictions?
- A: Yes, the device can be used in portable exposure conditions without any restrictions.
Summary of Button Functions
- Power On/Off/Volume up
- Volume down
- LED indicator
- charging port
- Multifunction Button: Pause/Play/Answer Phone Call/ End Phone Call/ Next Track/ Last Track/ Voice Assistant
- Microphone
- RGB light
Controls
- On: When the headphones are in a power-off state, press and hold the power button for 3 seconds with blue LED flickering, reminding tone: power on.
- Off: When the headphones are in a power-on state, press and hold the power button for 5 seconds with red LED flickering once, reminding tone: power off.
- Connect BT: When the headphone is in a power-off state, press and hold it for 3 seconds to enter a pairing state with red and blue LEDs flickering and reminding tone: pairing. After the device (smartphone, tablet computer, etc.) discovers DV68 press it to connect.
- Connected successfully: When the headphone is successfully linked to the device, a blue LED will flicker every 3 seconds with a reminder tone: Connected
- Pause/Play: When the music is on, single-click the multi-function button to pause or play.
- Answer/Hang-up: click the multi-function button to answer when there is an incoming call. Click the multi-function button to end the ongoing call.
- Vol+: Press the Volt once to turn up the volume.
- Vol-: Press the Vol- once to turn down the volume.
- Next Track: Double-click the multi-function button and skip to the next track.
- Last Track: Triple-click the multi-function button and skip to the last track.
- Assistant: Long press the multi-function button for
- 3 seconds to enter the Voice Assitant model. Long press
- 3 seconds again to exit the Voice Assitant model
- Reset: After plugging the USB charging line, the headphones will be reset and powered off for charging.
- Clear all paring info: Long press the Power On/Off button and Volume Down button for 5 seconds simultaneously
- RGB light: Press and hold the minus button for 3 seconds to turn it on. Turn off the RGB light, double-click the minus button to switch the light mode
How to wear
- Hang the headphones behind your neck with both speakers clinging to your cheekbones. After that, adjust it until you feel comfortable.
Specifications
- Music play time Standard: 15 hours
- Standby time: 30 days
- Charging time: 2 hours
- BT version: 5.3
- Speaker impedance: 80÷10%
- Microphone sensitivity: 40 ‡ 2db
- Product weight: 34g
- Connection distance: 15 meters
Attention
- Please wear the bone-conduction speakers of the headphones at your cheekbones before your ears and do not put them in your ears.
- Listening to music for an excessively long time may make you feel uncomfortable, please try to use a medium volume instead of a big one.
- No matter how the volume is, please do not let it prevent you from hearing the surrounding sounds. Please take care when using the headphones.
- Do not throw, press the headphones or put it in the water.
- The headphones should keep away from fire, water and high-voltage devices.
- It is not for children’s use as it contains small parts.
- Please do not treat it as domestic waste. Instead, send it to your electrical and electronic recycling station.
- If there is any injury or property loss due to violation of the above contents, we will not bear any responsibility.
FCC Warning
This device complies with Part 15 of the FCC Rules.
Operation is subject to the following two conditions:
- This device may not cause harmful interference, and
- this device must accept any interference received, including. interference that may cause undesired operation.
NOTE 1: This equipment has been tested and found to comply with the limits for a Class B digital device, according to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used following the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. Suppose this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on. In that case, the user is encouraged to try to correct the interference by one or more of the following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and the receiver.
- Connect the equipment to an outlet on a circuit different from that to which the receiver is connected.
- Consult the dealer or an experienced radio/TV technician for help.
NOTE 2 : Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. The device has been evaluated to meet general RF exposure requirement. The device can be used in portable exposure conditions without restriction.
Read User Manual Online (PDF format)
Read User Manual Online (PDF format) >>