Osann R129/03 Smyths Toys Ireland Instruction Manual

Osann R129/03 Smyths Toys Ireland

Thank you for choosing our One360 infant car seat. If you need help with this product, please contact our customer service.

HOW TO USE

• This product is suitable for children with a height of 40 to 150 cm.
• Installation is rear-facing from 40 to 105 cm body height using the Isofi x connectors and the Top-Tether belt. The child is strapped in with the 5-point belt of the child’s car seat.
• Forward-facing installation from 76 to 105 cm body height and a minimum age of 15 months with the aid of the Isofi x connectors and the Top-Tether belt. The child is strapped in with the child’s car seat’s 5-point belt.
• Forward-facing installation from 100 to 150 cm body height is carried out with the aid of the Isofi x connectors. The Top-Tether strap is not needed in this size class. The child is strapped in with the car’s 3-point seat belt. Alternatively, the child car seat in the 100-150 cm size class can also be fitted with the 3-point seat belt only. Attaching the seat with the Isofi x connectors is not essential but is recommended.

IMPORTANT
DO NOT USE THE CHILD’S CAR SEAT FACING IN THE DIRECTION OF TRAVEL UNTIL THE CHILD HAS REACHED THE AGE OF 15 MONTHS.

EXTREME DANGER
We recommend installing the child car seat on the rear seat of the vehicle. DO NOT attach the child car seat for rear-facing use in the 40 to 105 cm height class to the front seat where there is an airbag. It may be used on the front seat if the airbag can be deactivated. Please refer to the vehicle manual for more information on this.

PLEASE NOTE

NOTE (40-105 cm): This is an i-Size child restraint system. It is approved under Regulation No 129 for use in ‘i-Size compatible’ vehicle seats as specified by the vehicle manufacturer in the vehicle owner’s manual. In cases of doubt, please contact the manufacturer of the child restraint system or the dealer. The child restraint system can be used on all Isofi x seats as long as there is also an attachment hook for the top tether.

NOTE (100-150 cm): This is an optimized i-Size children’s booster seat. It is approved under Regulation no. 129 for use primarily in “i-Size vehicle seats” as specified by vehicle manufacturers in the vehicle owner’s manual. If in doubt, contact either the manufacturer of the extended child restraint system or the dealer. The optimized i-Size booster seat can also be used on all seats in the “universal” category, as long as this does not conflict with the vehicle interior. If you have any doubts, please contact the car seat manufacturer or the retailer.

1. & 2.: 40-105 cm: Only if Isofi x connectors and a fastening hook for the top tether are available. For rear-facing use additionally only if the airbag can be deactivated. 100-150 cm: Only if at least a 3-point belt that complies with ECE R16 is available. If Isofi x connectors are available, these can also be used. Securing the child only with a 2-point belt is not approved.

The following table provides information about the fastening devices and methods:

Size class

| Installation direction|

Installation

|

Type

|

Child safety device

---|---|---|---|---
40-105 cm| Rear-facing| Isofix connectors

& Top-Tether

| i-Size| 5-point seatbelt for the child seat

76-105 cm

| Forward- facing| Isofix connectors

& Top-Tether

|

i-Size

| 5-point seatbelt for the child seat

100-150 cm

| Forward- facing| Isofix connectors & 3-point car seat belt| i-Size Booster seat|

3-point car seat belt

100-150 cm

| Forward- facing| 3-point car seat belt| i-Size Booster seat|

3-point car seat belt

WARNING

• Please read through these instructions carefully before use to guarantee the safety of your child. Retain the manual. Non-compliance with the instructions in this manual may result in serious injuries to your child.
• The child seat can only be used with its 5-point belt system for children who weigh under 18 kg and are less than 105 cm in height.
• The child seat CANNOT be used with its 5-point belt system for children who weigh over 18 kg and are taller than 105 cm.
• The child seat can be installed rear-facing or forward-facing with the Isofix connectors and the Top-Tether belt. Important: Do not install the child’s car seat in a forward-facing position until the child is at least 15 months old.
• For Isofi x installation: Be sure to read the car manufacturer’s manual.
• Do not use load-bearing contact points other than those described in the instructions and indicated in the child restraint system.
• Do not use this child’s car seat at home. It has been designed exclusively for use in a car.
• Do not leave your child unsupervised in the seat at any time.
• Do not place the rear-facing child car seat on the front seat with an activated airbag. This could lead to serious injuries or death.
• The child seat must be replaced if it is exposed to heavy impact in an accident.
• For safety reasons, the child’s car seat must be secured in the vehicle even when no child is sitting in the child’s car seat.
• Always make sure that all belts that attach the child’s car seat to the vehicle are secure and that all belts that restrain the child are adjusted to fit the child’s body. Ensure that the belts are not twisted.
• Items of luggage or other objects that could cause injury in the event of a collision must be properly secured.
• The rigid items and plastic parts of a child restraint system must be positioned and installed so that they cannot get caught by a movable seat or a vehicle door.
• Belts that sit low must hold the child’s pelvis firmly in place. To avoid the risk of falling, your child should always be strapped in.
• It is dangerous to make changes or additions to the product without approval from the responsible authority. Non-compliance with the installation instructions provided by the manufacturer of the child restraint system may also present risks to the safety of your child.
• This child seat is designed for children with a maximum height of 150 cm. Never overload the child seat by transporting more than one child or additional loads in it.
• The child restraint system must not be used without the seat cover.
• The seat cover must not be replaced by a cover other than that recommended by the manufacturer, as this seat cover is an important component of the restraint performance.

SEAT PARTS

Front view

Rearview

USING THE CHILD CAR SEAT

Setting the child’s car seat tilt angle

• Operate the position lever on the lower front of the seat bucket with one hand.
• Hold the seat pan with the other hand and adjust the angle.

The following seat positions are possible:(Please see the label on the child’s car seat) Rear-facing, Body height 40-75 cm, position: R1 Body height 76-105 cm, position: R2 Forward-facing, Height 76-105 cm, min. 15 months: 4 positions (1-4) Forward facing, body size: 100-150 cm: 1 position (1)

Turning the child’s car seat

• Pull the rotation lever on the front of the base with one hand and with the other hand you can rotate the seat unit in the desired direction of travel.
• The forward-facing position is only suitable for children with a minimum age of 15 months and a minimum height of 76 cm. The rear-facing position is designed for children from 40 to 105 cm tall and has a maximum weight of 18 kg.
• The side position is only intended to facilitate the child’s entry. This position must not be used while driving.

Adjusting the belt

• To loosen the belt, press the belt adjustment button in the seat area with one hand. Hold the belt buckle with the other hand and carefully loosen the attached straps.
• Pull the front adjustment strap to tighten the belts. Ensure that the straps are not twisted.

Opening/closing the belt

• To unlock the belt, press the button on the belt buckle, pull out the buckle tongues, and separate them.
• To lock the belt, fi rest, connect both tongues of the buckle, and then insert them together into the belt buckle.

Adjusting the head support

• Release the belt and pull the lever to adjust the headrest on the back of the child’s car seat. Move the headrest until it engages at the correct height.
• Make sure the shoulder straps are positioned just above your child’s shoulders when they come out of the child’s car seat.
• Release the lever and ensure that the head support is engaged.

Isofi x connectors

• Press the two lateral Isofi x connector buttons to extend the length of the Isofi x connectors.
• Guide the Isofi x connectors onto the Isofi x anchor points on the seat of the vehicle and ensure that they lock into position.
• Push the child’s car seat in until it rests securely against the backrest of the seat of the vehicle. Ensure that both Isofi x indicators are showing green.

Head cushion & comfort insert

• The head cushion and comfort insert are designed for babies with a body height of 40-75 cm.
• Please remove both inserts as soon as your child has exceeded the specified body size.

Top tether for size range 40-105 cm

• Remove the top tether from the storage bag.
• To release the top tether, press the grey button with one hand and pull the side of the belt anchor to the required length with the other hand.
• To fi x the top tether, clip the anchor to the fixing point on the car seat and pull it as tight as possible. The display does not turn green until the belt is tightened sufficiently.
• When using the child car seat rearward facing, the top tether strap must be threaded through the top tether guide on the side of the child car seat. Ideally, use the guide towards the interior of your car to ensure rotation to the car door for easy entry and exit.
• The Top-Tether strap is only necessary for the size range 40of -105 cm. In the 100-150 cm size class, you can stow the Top-Tether strap back in the storage bag.

Stowing the 5-point seat belt for size class 100-150 cm

• Open the seat cover at the back of the child’s car seat and unthread the shoulder pads from their hooks (fi g. A). Open the shoulder pads by their press studs so that you can completely remove the shoulder pads from the child’s seat (Fig. B). Also, remove the seat belt buckle pad.
• Loosen the belt system to the maximum length.
• Stow the Top-Tether belt in the storage bag at the back of the child’s car seat.
• Open the cover in the back area at its press studs and fold it away. Also, fold the lower part of the headrest cover to the side (Fig. C).
• Open the harness system and bring the shoulder straps behind the cover.
• Carefully pull off the cover in the seat area so that you can pass the seat belt buckle through the opening in the seat cover.
• Insert the belt buckle tongues into the belt buckle and stow it in the recess in the seat area (Fig. D).
• Put the cover back over the seat area, making sure that the cover is in its slot.
• Fold back the lower part of the headrest cover fold up the backrest cover again and close it with its press studs.
• Keep the removed pads in a safe place for later use.

CLEANING

To guarantee the long-term usage of your child’s car seat, do not use any solvents, abrasive cleaners, or aggressive cleaning agents to clean the car seat. Check the stability of the fabric and the seams after each wash. When washing the fabric, carefully follow the instructions on the label (see below).

MAINTENANCE

Regularly check the condition of the product for possible damage. In the event of damage, the child car seat must no longer be used and must be stored out of the reach of children. In case of any issues, please contact Osann customer service at +49 (0)7731 970077.

INSTALLATION OF THE CHILD CAR SEAT

Size class 40-105 cm, max. 18 kg, rear-facing

1. Adjust the child car seat to the maximum reclining position and turn it so that it points to the R1 – 40-75 cm seating position in rear-facing orientation. If your child’s height exceeds 75 cm, please change to the seat position R2 – 76-105 cm.
2. Press the two lateral Isofi x connector buttons to extend the length of the Isofi x connectors.
3. Guide the Isofi x connectors onto the Isofi x anchor points on the seat of the vehicle and ensure that they lock into position.
4. Push the child’s car seat in until it rests securely against the backrest of the seat of the vehicle. Ensure that both Isofi x indicators are showing green.
5. Take the top tether out of the storage bag and extend it to its full length.
6. The Top-Tether belt must be threaded through the Top-Tether guide on the side of the child’s car seat. Ideally, use the guide towards the interior of your car to ensure rotation to the car door for easy entry and exit.
7. Clip the top tether onto the hook provided in your car (e.g. on the back of the car seat or in the boot. Please consult your car manual for this).
8. Tighten the top tether until the display on the top tether turns green.
9. When placing your child in the child car seat, turn the car seat towards the car door for convenience.
10. Unfasten the belt buckle on the child’s car seat and place the belts on the outside of the seat. 11 . Put your child in the child’s car seat.
11. Adjust the height of the headrest as described above.
12. Fasten the belt buckle again until you hear a click.
13. Pull the front adjustment strap to tighten the belts. Ensure that the straps are not twisted. 15 . Turn the seat into the rear-facing position. Check that the child’s car seat is locked in this position.

Height class 76-105 cm, min. 15 months, max. 18 kg, forward-facing

IMPORTANT: DO NOT USE THE CHILD CAR SEAT IN THE DIRECTION OF TRAVEL UNTIL THE CHILD IS AT LEAST 15 MONTHS OLD.

1. Press the two lateral Isofi x connector buttons to extend the length of the Isofi x connectors.
2. Guide the Isofi x connectors onto the Isofi x anchor points on the seat of the vehicle and ensure that they lock into position.
3. Push the child’s car seat in until it rests securely against the backrest of the car seat. Ensure that both Isofi x indicators are switched to green.
4. Take the top tether out of the storage bag and extend it to its full length.
5. Clip the top tether onto the hook provided in your car (e.g. on the back of the car seat or in the boot. Please consult your car manual for this).
6. Tighten the top tether until the display on the top tether turns green.
7. Unfasten the belt buckle on the child’s car seat and place the belts on the outside of the seat.
8. Put your child in the child’s car seat.
9. Adjust the height of the headrest as described above.
10. Fasten the belt buckle again until you hear a click.
11. Pull the front adjustment strap to tighten the belts. Ensure that the straps are not twisted.
12. When facing in the direction of travel, the child car seat offers four adjustable seat positions.

Size class 100-150 cm, forward-facing

1. The 5-point seat belt and top-tether harness of the child car seat must be stowed as previously described. These are not needed in this size class.
2. Press the two lateral Isofi x connector buttons to extend the length of the Isofi x connectors.
3. Guide the Isofi x connectors to the Isofi x anchor points on the car seat and snap them into place.
4. Push the child’s car seat in until it rests securely against the backrest of the car seat. Ensure that both Isofi x indicators are switched to green.
5. Thread the diagonal belt of the 3-point seat belt in the car through the diagonal belt guide on the headrest of the child’s car seat.
6. Thread the lap belt of the car’s 3-point seat belt through the first lap belt guide in the seat area of the child’s car seat.
7. When placing your child in the child car seat, turn the car seat towards the car door for convenience.
8. Put your child in the child’s car seat.
9. Adjust the height of the headrest so that the child’s head is fully in the headrest and the diagonal belt comes out through the belt guide at the level of the child’s shoulders.
10. Turn the seat into the forward-facing position. Check that the child’s car seat is locked in this position.
11. Close the belt buckle of the 3-point seat belt until you hear a click.
12. Make sure that both the diagonal belt and the lap belt run through the second lap belt guide on the child’s car seat which faces the car’s seat belt buckle.
13. Pull on the diagonal strap to tighten it. Make sure that the straps are not twisted.
14. The seat position must be set to position 1.

Installation without Isofix
Alternatively, the child car seat in the 100-150 cm size class can also be fitted with the 3-point seat belt only. Attaching the seat with the Isofi x connectors is not essential but is recommended.

• www.osann.de

Osann GmbH Gewerbestr. 22

• D-78244 Gottmadingen
• Tel.: +49 (0)7731 970077
• Fax: +49 (0)7731 970055
• E-Mail: info@osann.de

Read User Manual Online (PDF format)

Read User Manual Online (PDF format)  >>

Download This Manual (PDF format)

Download this manual  >>